Hacktoberfest 2026:メンテナが10月に向けて印を付けた、オープンで初心者向けの issue。 Hacktoberfest の issue を見る

DTR signal needs to be activated from terminal program

オープン
#32 コメント 10 件 リアクション 0 件 担当者 0 名 GitHub で見る

まだ誰も着手していません。

評価

難易度
2/5
見積もり時間
1〜3時間
初心者へのやさしさ
35/100
issue の種類
バグ
明瞭さ
おおむね明確
活発さ
停滞
技術スタック
c
領域
embedded-iot

調査の方向性

Start with cdc_uart.c and inspect where tud_cdc_connected() controls host transmission; compare it with the TinyUSB cdc_device.h and cdc_device.c references in the issue. Done means terminal output is available when TinyUSB is ready without requiring DTR, while preserving the existing CDC behavior.

索引モデルが issue の本文から書いたものです。

説明

Problem:

tud_cdc_connected is using DTR bit which is used in cdc_uart.c If DTR is not set by host (PC terminal or other device), we can't send anything to host.

same issue with #906, #921, #932

I don't think its necessary to check DTR as discussed in here -> hathach/tinyusb

Until user open the serial port, data buffer will be overridden.

src/class/cdc/cdc_device.h

static inline bool tud_cdc_connected (void)
{
  return tud_cdc_n_connected(0);
}

src/class/cdc/cdc_device.h

bool tud_cdc_n_connected(uint8_t itf)
{
  // DTR (bit 0) active  is considered as connected
  return tud_ready() && tu_bit_test(_cdcd_itf[itf].line_state, 0);
}
how to fix

change tud_cdc_connected() with tud_ready()

主要言語
C
スター
1.3k
フォーク
364
平均マージ
20日 5時間
マージ済み PR(30日)
2

環境構築

このプロジェクトには開発コンテナ、Dockerfile、コントリビューションガイドがありません。まず README を読み、一般的な手順ははじめてのコントリビューションガイドを参照してください。

はじめの一歩

  1. issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
  2. 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
  3. リポジトリをフォークし、ブランチを切って変更します。
  4. issue 番号を参照したプルリクエストを送ります。

raspberrypi/debugprobe のほかの issue

raspberrypi/debugprobe の issue をすべて見る

似ている issue

C の issue をもっと見る

新しい issue をメールで受け取る

初心者向けの GitHub issue を短くまとめたダイジェスト。