Support Python 3.15 and free-threaded 3.15t
メンテナーはふだん 1 日以内に返信
まだ誰も着手していません。
評価
- 難易度
- 5/5
- 見積もり時間
- 1週間以上
- 初心者へのやさしさ
- 28/100
調査の方向性
Start by reading the Python test environment definitions and CI configuration for the existing 3.14 environments, then review the named failing tests in xarray/testing/assertions.py and the test guards described in the report. Compare the proposed 3.15 and 3.15t environments with those setups and investigate the scipy file manager race. Done means the new environments and fixes are ready for CI, with the reported failures addressed.
索引モデルが issue の本文から書いたものです。
説明
Python 3.15.0 is out, and conda-forge has both python-gil and python-freethreading builds. I tried running the test suite on both, as preparation for adding them to CI.
Python 3.15 (conda-forge)
- All test dependencies have 3.15 builds except pyarrow.
- The
daskmetapackage requires pyarrow, so without a lower bound the solver silently falls back to dask/distributed 2023.3.0. Usingdask-core >=2026+distributedinstead gives dask 2026.8.0, and otherwise the same versions astest-py314. - Test results: 1 failed, 22016 passed.
TestDataArray::test_to_dask_dataframeneeds pyarrow (viadask.dataframe) but is only guarded byrequires_dask.
Free-threaded Python 3.15t (PyPI wheels)
conda-forge has no free-threaded 3.15 builds of numpy, pandas, scipy etc. yet, but PyPI has cp315t wheels for numpy, pandas, scipy, pyarrow, matplotlib, cartopy, rasterio and lxml. There are no cp315t wheels for cftime, netCDF4, h5py, numcodecs, bottleneck, numexpr and numba.
With a conda python-freethreading interpreter and PyPI wheels: 150 failed, 2 errors, 14646 passed. With PYTHON_GIL=1, 148 of these still fail, so most aren't free-threading issues:
- 137: h5netcdf is installed without h5py (no
cp315twheel), sorequires_h5netcdfdoesn't skip. Environment issue. - 5:
test_ensure_warnings_not_elevated.ensure_warningsinxarray/testing/assertions.pyreassignswarnings.filters, which has no effect with context-aware warnings (sys.flags.context_aware_warnings, on by default in free-threaded builds). So the publicxr.testing.assert_*functions elevate warnings to errors there. - 3:
test_rechunk_multi_dimensional_da_cftimeis missingrequires_cftime. - 3: datatree tests assume netCDF4 is installed (
NameError: name 'nc4' is not definedin a fixture, andtest_default_write_engine).
Only 4 failures depend on the GIL: test_open_mfdataset_manyfiles[scipy-20-*-*-5] (file_cache_maxsize=5, parallel dask reads). CachingFileManager evicts and closes a scipy file opened with mmap while another thread still uses its data. The resulting RuntimeWarning leaves the LRU cache inconsistent and ends in a KeyError. These pass with PYTHON_GIL=1.
Upstream status
Python 3.15 (checked when there are builds on conda-forge and wheels on PyPI):
- numpy: 2.5.4 on conda-forge and PyPI
- numba: 0.68.0 on conda-forge and PyPI (numba/numba#10581)
- dask: pure Python (on conda-forge use
dask-core; thedaskmetapackage needs pyarrow) - netCDF4:
abi3builds of 1.7.4 on conda-forge and PyPI - h5netcdf: pure Python
- bottleneck: 1.6.0 on conda-forge; PyPI wheels need a release (support merged in pydata/bottleneck#589, release requested in pydata/bottleneck#591)
Check when: a bottleneck release after 1.6.0 shipscp315wheels on PyPI. - cftime: 1.6.5 on conda-forge,
abi3wheels of 1.6.6 on PyPI - numcodecs: 0.17.0 on conda-forge; no PyPI wheels: zarr-developers/numcodecs#874 (zarr-developers/numcodecs#842 was closed without merging)
Check when: a numcodecs release shipscp315wheels on PyPI (0.17.0 doesn't). - pyarrow: wheels of 26.0.0 on PyPI;
py315builds of 25.0.0 on conda-forge (conda-forge/pyarrow-feedstock#184) - h5py: 3.16.0 on conda-forge; no PyPI wheels: h5py/h5py#2972 (closed;
abi3wheels from h5py/h5py#2885 are not released yet)
Check when: an h5py release shipscp315orabi3wheels on PyPI (3.16.0 has neither). - numexpr: 2.14.2 on conda-forge; no PyPI wheels: pydata/numexpr#579
Check when: a numexpr release shipscp315wheels on PyPI (2.14.2 doesn't). - cf-units (needed by iris):
abi3builds of 3.3.1 on conda-forge and PyPI - pyyaml (needed by dask): 6.0.3 on conda-forge; no PyPI wheels: yaml/pyyaml#951
Check when: a pyyaml release shipscp315wheels on PyPI (6.0.3 doesn't).
Free-threaded Python 3.15t (checked when there are cp315t wheels on PyPI):
- conda-forge builds: the py315 migration started in conda-forge/conda-forge-pinning-feedstock#8911, but the free-threading migration only covers 3.14t so far
Check when: conda-forge starts apython315tmigration and numpy/pandas/scipy havecp315tbuilds. - numpy:
cp315twheels of 2.5.4 - numba (also needed by numbagg): numba/numba#10473 (free-threading in general); 3.15t support is announced for the next release in numba/numba#10581
Check when: a numba release shipscp315twheels on PyPI (0.68.0 only hascp315). - dask: pure Python
- netCDF4:
cp315twheels of 1.7.5 (Unidata/netcdf4-python#1509) - h5netcdf: pure Python (but needs h5py, see below)
- bottleneck: release requested in pydata/bottleneck#591 (see also pydata/bottleneck#532 on free-threading safety)
Check when: a bottleneck release shipscp315twheels on PyPI. - cftime (also needed by nc-time-axis and iris):
cp315twheels of 1.6.6.1 (Unidata/cftime#421, Unidata/cftime#424) - numcodecs (also needed by zarr): zarr-developers/numcodecs#874 (see also zarr-developers/numcodecs#749 for free-threading in general; 3.14t support in zarr-developers/numcodecs#858)
Check when: a numcodecs release shipscp315twheels on PyPI (0.17.0 doesn't). - pyarrow:
cp315twheels of 26.0.0 - h5py: h5py/h5py#2475 (free-threading support;
abi3twheels planned, see h5py/h5py#2972)
Check when: an h5py release shipscp315torabi3twheels on PyPI. - numexpr: pydata/numexpr#579 (2.14.2 already has
cp314twheels, so the next release will likely includecp315t)
Check when: a numexpr release shipscp315twheels on PyPI. - cf-units (needed by iris): no issue yet; 3.3.1 only has
abi3wheels
Check when: a cf-units release shipscp315torabi3twheels on PyPI. - pyyaml (needed by dask): yaml/pyyaml#951 (6.0.3 already has
cp314twheels; see also yaml/pyyaml#870 for free-threading in general)
Check when: a pyyaml release shipscp315twheels on PyPI.
Other test dependencies without 3.15t wheels on PyPI (checked 2026-10-13): psutil and tornado (distributed), google-crc32c (zarr) and lz4 (dask extras). psutil, tornado and lz4 build from source on 3.15t; google-crc32c builds but falls back to a pure Python implementation with a RuntimeWarning on import. cf-units doesn't build without udunits2, so iris has to be left out of the 3.15t env.
Proposal for CI
- Add
test-py315alongside the 3.14 envs, and only replace 3.14 once pyarrow has 3.15 builds on conda-forge. Until then, move pyarrow from theaccelfeature into its own feature and usedask-corein the 3.15 env. - Add
test-py315t(ubuntu only) with a condapython-freethreadinginterpreter and PyPI wheels, without h5netcdf until h5py hascp315twheels. - Fix the test guards and
ensure_warningsabove, and look into the file manager race.
[This is Claude Code on behalf of Michael Niklas]
- 主要言語
- Python
- スター
- 4.2k
- フォーク
- 1.5k
- 平均マージ
- 2日 21時間
- マージ済み PR(30日)
- 74
環境構築
このプロジェクトの開発コンテナを、あなたの GitHub アカウントでブラウザ上に起動します。
- Dockerfile・Docker Compose ファイルなし
- プルリクエストのテンプレートあり
- コントリビューションガイドを読む
はじめの一歩
- issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
- 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
- リポジトリをフォークし、ブランチを切って変更します。
- issue 番号を参照したプルリクエストを送ります。
pydata/xarray のほかの issue
-
xarray removes axis grid from pcolormesh対応中かも @Sealdot が今日担当しました。 オープンbug needs triage
難易度 2/5 1〜3時間 初心者へのやさしさ 70/100
メンテナーはふだん 1 日以内に返信
-
`DataTree.map_over_datasets` behavior can be obscure sometimes対応中かも @mohansree14 が 24 日前に担当しました。 オープンneeds triage
難易度 2/5 1〜3時間 初心者へのやさしさ 78/100
pydata/xarray#11813 · コメント 1 件 ·
メンテナーはふだん 1 日以内に返信
-
Comparing attrs that contain a dict of NumPy arrays raises ValueError in identical / assert_identical対応中かも @SohamXYZDev が 29 日前に担当しました。 オープンbug needs triage
難易度 2/5 1〜3時間 初心者へのやさしさ 73/100
pydata/xarray#11777 · コメント 1 件 ·
メンテナーはふだん 1 日以内に返信
-
RangeIndex` with datetime64 bounds cannot be printed (`Unknown format code 'g'`)対応中かも @d-chambers が 60 日前に担当しました。 オープンbug
難易度 2/5 1〜3時間 初心者へのやさしさ 68/100
pydata/xarray#11598 · コメント 3 件 ·
メンテナーはふだん 1 日以内に返信
-
DataTree constructor error message says dict even though dict is not accepted対応中かも @aryansk が 100 日前に担当しました。 オープンbug contrib-good-first-issue topic-DataTree topic-error reporting
難易度 2/5 1〜3時間 初心者へのやさしさ 72/100
pydata/xarray#11514 · コメント 2 件 ·
メンテナーはふだん 1 日以内に返信
似ている issue
-
難易度 2/5 1〜3時間 初心者へのやさしさ 78/100
abetlen/llama-cpp-python#2424 ·
メンテナーはふだん 1 日以内に返信
-
Bug IronPython Python 3
難易度 2/5 1〜3時間 初心者へのやさしさ 72/100
pyrevitlabs/pyRevit#4184 ·
メンテナーはふだん 1 日以内に返信
-
難易度 1/5 1時間未満 初心者へのやさしさ 74/100
jqueryscript/awesome-claude-code#1009 ·
-
tests
難易度 2/5 1〜3時間 初心者へのやさしさ 66/100
メンテナーはふだん 3 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 72/100
メンテナーはふだん 1 日以内に返信