[BUG] jemalloc is never loaded when NET_ADMIN/NET_RAW are added
まだ誰も着手していません。
評価
- 難易度
- 4/5
- 見積もり時間
- 3〜5日
- 初心者へのやさしさ
- 48/100
- issue の種類
- バグ
- 明瞭さ
- おおむね明確
- 活発さ
- 活発
- 技術スタック
- docker, linux
調査の方向性
Start with the svc-homeassistant/run script mentioned in the issue and trace both capability branches, including where setcap runs and how Home Assistant is launched. The report gives an ambient-capability capsh example to compare with the current setup; verify behavior in a rebuilt image with and without Bluetooth capabilities, then confirm jemalloc is mapped in /proc/<pid>/maps in both cases.
索引モデルが issue の本文から書いたものです。
説明
Is there an existing issue for this?
- I have searched the existing issues
Current Behavior
AI disclosure: I found and diagnosed this with an AI assistant (Claude Code). The commands and output below were run on my own Pi, and I've reviewed the report before posting.
svc-homeassistant/run exports LD_PRELOAD=/usr/local/lib/libjemalloc.so.2, but when the container has NET_ADMIN + NET_RAW (as the readme suggests for Bluetooth), the same script first runs setcap on the python binary. A binary with file capabilities runs in secure-execution mode (AT_SECURE=1), and the musl loader ignores LD_PRELOAD in that mode. So Home Assistant silently runs on musl's malloc and MALLOC_CONF does nothing.
In the running container the variable is set, but the library is not mapped:
$ P=$(docker top homeassistant -o pid,args | awk '/python3 -m homeassistant/{print $1}')
$ sudo tr '\0' '\n' < /proc/$P/environ | grep LD_PRELOAD
LD_PRELOAD=/usr/local/lib/libjemalloc.so.2
$ sudo grep -c jemalloc /proc/$P/maps
0
/etc/ld.so.preload isn't a workaround: musl doesn't support it,
Expected Behavior
jemalloc is loaded whether or not the Bluetooth capabilities are enabled, as the run script intends.
Possible fix: grant the capabilities as ambient capabilities instead of file capabilities. Ambient caps don't trigger secure-execution mode, so LD_PRELOAD keeps working. In the repro below, the process ends up with the same effective set (CapEff: 0000000000003400: net_bind_service, net_admin, net_raw) and still runs as abc. Roughly:
exec \
s6-notifyoncheck -d -n 60 -w 5000 -c "nc -z localhost 8123" \
capsh --caps="cap_net_raw,cap_net_admin,cap_net_bind_service+eip cap_setpcap,cap_setuid,cap_setgid+ep" \
--keep=1 --user=abc --addamb=cap_net_raw,cap_net_admin,cap_net_bind_service \
-- -c "exec python3 -m homeassistant -c /config"
The no-Bluetooth branch would need the same treatment with only cap_net_bind_service, since it also runs setcap. I've tested the mechanism, not a rebuilt image with this run script.
Steps To Reproduce
This uses a copy of busybox in place of python, so it doesn't need the full init:
docker run --rm --cap-add NET_ADMIN --cap-add NET_RAW --entrypoint bash \
lscr.io/linuxserver/homeassistant:latest -c '
id abc >/dev/null 2>&1 || adduser -D -u 911 abc
J=/usr/local/lib/libjemalloc.so.2; mkdir /tmp/x; B=/tmp/x/busybox; cp /bin/busybox $B
echo -n "no file caps: "; LD_PRELOAD=$J s6-setuidgid abc $B grep -c jemalloc /proc/self/maps
setcap cap_net_raw,cap_net_admin=+ep $B
echo -n "file caps: "; LD_PRELOAD=$J s6-setuidgid abc $B grep -c jemalloc /proc/self/maps
setcap -r $B
echo -n "ambient caps: "; LD_PRELOAD=$J capsh \
--caps="cap_net_raw,cap_net_admin,cap_net_bind_service+eip cap_setpcap,cap_setuid,cap_setgid+ep" \
--keep=1 --user=abc --addamb=cap_net_raw,cap_net_admin,cap_net_bind_service \
-- -c "$B grep -c jemalloc /proc/self/maps"'
Output (a count of 0 means jemalloc is not loaded):
no file caps: 3
file caps: 0
ambient caps: 3
Environment
- OS: Debian 12 (bookworm), Raspberry Pi 5 Model B 8GB
- How docker service was installed: Docker's official apt repo (docker-ce 29.8.2)
CPU architecture
arm64
Docker creation
homeassistant:
image: lscr.io/linuxserver/homeassistant:latest # 2026.10.4-ls260
network_mode: host
environment:
- PUID=1000
- PGID=1000
- TZ=Europe/London
volumes:
- ./config:/config
- /var/run/dbus:/var/run/dbus:ro
cap_add:
- NET_ADMIN
- NET_RAW
restart: unless-stopped
Container logs
[migrations] started
[migrations] no migrations found
───────────────────────────────────────
GID/UID
───────────────────────────────────────
User UID: 1000
User GID: 1000
───────────────────────────────────────
Linuxserver.io version: 2026.10.4-ls260
Build-date: 2026-10-24T23:03:55+00:00
───────────────────────────────────────
**** New container detected, fixing python package permissions. This may take a while. ****
Setting permissions
[custom-init] No custom files found, skipping...
Adding cap_net_admin and cap_net_raw to python binary for bt access
[... custom integration warnings omitted ...]
Connection to localhost (::1) 8123 port [tcp/*] succeeded!
[ls.io-init] done.
Note: there is no error to show. The loader drops LD_PRELOAD silently; the relevant line is "Adding cap_net_admin and cap_net_raw to python binary for bt access".
- 主要言語
- Dockerfile
- スター
- 285
- フォーク
- 34
- 平均マージ
- 41分
- マージ済み PR(30日)
- 1
環境構築
- Dockerfile または Docker Compose ファイルあり
- プルリクエストのテンプレートあり
- コントリビューションガイドを読む
はじめの一歩
- issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
- 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
- リポジトリをフォークし、ブランチを切って変更します。
- issue 番号を参照したプルリクエストを送ります。
linuxserver/docker-homeassistant のほかの issue
-
no-issue-activity
難易度 4/5 3〜5日 初心者へのやさしさ 35/100
linuxserver/docker-homeassistant#146 · コメント 5 件 ·
linuxserver/docker-homeassistant の issue をすべて見る
似ている issue
-
難易度 2/5 1〜3時間 初心者へのやさしさ 79/100
hurttlocker/o8#6535 ·
-
area: backend bug priority: low
難易度 2/5 1〜3時間 初心者へのやさしさ 92/100
snapotter-hq/SnapOtter#4856 ·
メンテナーはふだん 1 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 83/100
メンテナーはふだん 1 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 64/100
-
vLLM metrics adapter tests start the adapter twice and race on its request counters対応中かも @bhargavchintam が今日担当しました。 オープン
難易度 2/5 1〜3時間 初心者へのやさしさ 82/100
llm-d/llm-d-inference-sim#933 ·
メンテナーはふだん 2 日以内に返信