Bitswap should use one stream per message
まだ誰も着手していません。
評価
- 難易度
- 5/5
- 見積もり時間
- 1週間以上
- 初心者へのやさしさ
- 25/100
- issue の種類
- 機能追加
- 明瞭さ
- 説明が足りない
- 活発さ
- 停滞
- 技術スタック
- go
調査の方向性
ソースファイル、テスト、エントリポイントのいずれも指定されていません。まず Bitswap メッセージとストリームのライフサイクルコードを追跡し、次に issue で説明されている Yamux のバッファリングのコンテキストを確認してください。完了の条件は、メッセージごとのストリーム、peer の切断時のクリーンアップ、およびそれによって生じる動作のカバレッジについて、合意されたアプローチがあることです。
索引モデルが issue の本文から書いたものです。
説明
We should consider changing bitswap to use one stream per message.
@MarcoPolo:
Ideally we'd use one stream per message and close the stream once we're done. I believe the reason we don't do that is that in Yamux the initial send buffer is constant per stream (rather than configurable both within a stream and per connection connection as in QUIC). This means that if our initial message is larger than that initial send capacity, then we have to wait for a round trip to send the whole message. By reusing the stream, the peer can increase our send buffer size in a later message.
It may be worth changing this in Yamux.
The real issue is that the cleanup of peer disconnects is slow. A lot of time is spent on acquiring the lock by many different goroutines.
The benefit of the one stream per message approach is that you avoid the whole issue of maintaining a reference and knowing if a connection is even alive or not.
@gammazero:
Seems worth it to having one stream per message. Reusing the stream is like double-muxing to avoid a buffer sizing issue. Being able to have different messages on the same connection is the point of muxing, and streams is the mechanism for doing that.
The initial yamux stream buffer size is 256Kib. If most of our messages are smaller, then no change to yamux is needed. I suspect we do need a larger buffer, particularly for block transfer. Seems like a change to yamux is worth it, unless the occasional extra round trip is not a significant problem.
- 主要言語
- Go
- スター
- 326
- フォーク
- 165
- PR マージ指標
- 30日以内にマージされた PR はありません
環境構築
- Dockerfile・Docker Compose ファイルなし
- プルリクエストのテンプレートあり
- コントリビューションガイドなし
はじめの一歩
- issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
- 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
- リポジトリをフォークし、ブランチを切って変更します。
- issue 番号を参照したプルリクエストを送ります。
ipfs/boxo のほかの issue
-
難易度 2/5 1〜3時間 初心者へのやさしさ 70/100
-
難易度 4/5 3〜5日 初心者へのやさしさ 46/100
-
難易度 3/5 1〜2日 初心者へのやさしさ 55/100
-
need/triage
難易度 5/5 1週間以上 初心者へのやさしさ 38/100
-
dif/medium effort/hours kind/enhancement P3 topic/devexp
難易度 5/5 1週間以上 初心者へのやさしさ 35/100
似ている issue
-
affects-8.5 component/session severity/moderate sig/transaction type/bug
難易度 2/5 1〜3時間 初心者へのやさしさ 72/100
メンテナーはふだん 1 日以内に返信
-
enhancement good first issue
難易度 2/5 1〜3時間 初心者へのやさしさ 85/100
メンテナーはふだん 1 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 72/100
harvester/harvester#12311 · コメント 1 件 ·
メンテナーはふだん 1 日以内に返信
-
verifyrun --bracket-digest --credit: relative --witness is could-not-check, absolute path creditsオープンbug effort:s impact:low raised-by:desk risk:low
難易度 2/5 1〜3時間 初心者へのやさしさ 62/100
medici-finance/assay#6580 · コメント 1 件 ·
メンテナーはふだん 1 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 80/100
blinklabs-io/gouroboros#3026 ·
メンテナーはふだん 1 日以内に返信