[Bug] gemini-enterprise time-based access: the configured time zone is not honored — a re-run silently resets it to America/New_York, and the level's title and hour descriptions assert Eastern regardless of what was set

まず deploy.sh:1143-1180 と 2455-2469 から始めて、保持を行う分岐と tfvars への書き込みを追跡し、次に gemini-stage-0/variables.tf:102-110 と access_policy.tf:44-53 を調べます。デプロイを再実行し、issue にある gcloud access-context-manager コマンドを使って、設定された値を実行前と実行後で比較します。完了の条件は、設定されたタイムゾーンとウィンドウが再実行後も維持され、labels がそれらを正確に説明し、expire 分岐がその値をリセットしなくなることです。

Bug Description

Three defects in the same feature, all of which make a non-Eastern deployment look and behave as Eastern. They share ten lines of code, so they are reported together; splitting them is fine if preferred.

1. The hour variables are documented as Eastern, unconditionally

# gemini-stage-0/variables.tf:102-110
variable "access_start_hour" {
  description = "The hour (0-23) in America/New_York timezone when access starts."
}
variable "access_end_hour" {
  description = "The hour (0-23) in America/New_York timezone when access ends."
}

Both descriptions name America/New_York as the timezone the hour is expressed in. That is only true when access_time_zone is left at its default. The expression actually evaluates the hour in whatever access_time_zone is set to (access_policy.tf:51 — request.time.getHours("${var.access_time_zone}")), so for any other timezone the documentation is simply wrong about what the number means. An operator configuring America/Anchorage reads that access_start_hour = 8 is 8am Eastern; it is 8am Alaska.

2. The access level's title hardcodes Eastern

# gemini-stage-0/access_policy.tf:48
title = "Business Hours East Coast"

This never varies with access_time_zone. Anyone reading the level in the Console or via gcloud access-context-manager levels describe time sees "Business Hours East Coast" asserted over a window that may be Alaska, Pacific or anything else. Combined with defect 1, every user-facing surface of this feature claims Eastern while the evaluation is doing something different — which is precisely the state that makes a misconfiguration invisible.

To be clear about what is NOT broken: the CEL expression itself is correct. It substitutes var.access_time_zone into all four getHours / getDayOfWeek calls, so a level built from a fresh, complete run evaluates in the configured zone. The bug is that the labels and docs say otherwise — and defect 3 then throws the configured value away entirely.

3. "Preserving" silently overwrites the configured window with the defaults

When the time access level already exists and is Terraform-managed, deploy.sh reports that it is preserving it and skips every time-related prompt:

# deploy.sh:1143-1150
if echo "$EXISTING_LEVELS" | grep -qE "(/|^)time$"; then
    if [[ "$MANAGED_ACCESS_LEVELS" == *"time"* ]]; then
         echo -e "${GREEN}Found existing MANAGED Access Level 'time'. Preserving.${NC}"
         CREATE_TIME_ACCESS="true"
    else
         echo -e "${YELLOW}Access Level 'time' already exists (Unmanaged). Skipping.${NC}"
         CREATE_TIME_ACCESS="false"
    fi
else
    # the five prompts — start day, end day, start hour, end hour, TIME ZONE — live here
fi

Because the prompts are skipped, ACCESS_START_DAY, ACCESS_END_DAY, ACCESS_START_HOUR, ACCESS_END_HOUR and ACCESS_TIME_ZONE are all unset. They are never hydrated from prior state either — the only assignments to any of them in the whole script are the prompts at :1155-1164.

The tfvars writer then skips each one, because every write is guarded on the variable being non-empty:

# deploy.sh:2455-2469
if [[ -n "$ACCESS_START_DAY" ]];  then echo "access_start_day = ${ACCESS_START_DAY}"   >> gemini-stage-0/terraform.tfvars; fi
...
if [[ -n "$ACCESS_TIME_ZONE" ]];  then echo "access_time_zone = \"${ACCESS_TIME_ZONE}\"" >> gemini-stage-0/terraform.tfvars; fi

So nothing is written, and Terraform falls back to the variable defaults — access_time_zone = "America/New_York", access_start_hour = 7, access_end_hour = 21, access_start_day = 1, access_end_day = 5.

Meanwhile CREATE_TIME_ACCESS="true" means the resource is still fully managed, and its expression is rebuilt from exactly those variables:

# gemini-stage-0/access_policy.tf:44-53
resource "google_access_context_manager_access_level" "time" {
  count = var.access_policy_number != "" && var.create_time_access ? 1 : 0
  title = "Business Hours East Coast"
  custom { expr {
    expression = ("request.time.getHours(\"${var.access_time_zone}\") >= ${var.access_start_hour} && ... <= ${var.access_end_day}")
  }}
}

The apply therefore overwrites the operator's configured window with the East-Coast defaults, immediately after printing "Preserving." The script reports the opposite of what it does.

The expire level has the identical defect (deploy.sh:1173-1180): "Preserving" + CREATE_EXPIRE_ACCESS="true", no prompt, ACCESS_EXPIRATION_TIMESTAMP unset, not written, so the expiry silently resets to the default 2028-01-01T00:00:00Z. The us level shares the shape but carries no parameters, so nothing is lost there.

Environment and Deployment Context

• Stellar Engine Version/Commit: main at commit f64ce6cd (= tag v3.0.0), verified 2026-08-11
• Deployment Type:
  • US Region Restricted (e.g., Access Policy constraint)
  • FedRAMP Medium
  • FedRAMP High
  • FedRAMP Moderate
  • DoD IL4
  • DoD IL5
  • Stand-alone / Custom
• FAST Stage (if applicable): N/A — this is a blueprint, not a FAST stage
  • Stage 0 (Bootstrap)
  • Stage 1 (Resource Management)
  • Stage 2 (Network Creation)
  • Stage 3 (Security and Audit)
• Affected Component:
  • blueprints/fedramp-high/gemini-enterprise/gemini-stage-0/variables.tf:102-110 (hour descriptions hardcoding America/New_York)
  • blueprints/fedramp-high/gemini-enterprise/gemini-stage-0/access_policy.tf:48 (title hardcoding Business Hours East Coast)
  • blueprints/fedramp-high/gemini-enterprise/deploy.sh:1143-1150 (the "Preserving" branch that skips the prompts)
  • blueprints/fedramp-high/gemini-enterprise/deploy.sh:1155-1164 (the only assignments to the five variables)
  • blueprints/fedramp-high/gemini-enterprise/deploy.sh:2455-2469 (writes guarded on non-empty)
  • blueprints/fedramp-high/gemini-enterprise/deploy.sh:1173-1180 (same defect for expire)
  • blueprints/fedramp-high/gemini-enterprise/gemini-stage-0/access_policy.tf:44-53 (the managed resource)
• Terraform Version: 1.12.2 (pinned by deploy.sh via tfenv; the stage declares required_version >= 1.7.4)
• GCP Provider Version: hashicorp/google >= 6.21.0 (stage-0 declared constraint)

Steps to Reproduce

1. Run deploy.sh, answer y to time-based access, and set a non-default window — e.g. Time Zone America/Anchorage, start hour 8, end hour 18.
2. Complete the apply. Read the level back and confirm the expression carries America/Anchorage and >= 8 && <= 18.
3. Run deploy.sh again against the same environment — any second pass, which is the normal path for adding an application or re-running a stage.
4. Observe Found existing MANAGED Access Level 'time'. Preserving. and note that no time prompts appear.
5. Complete the apply and read the level again: gcloud access-context-manager levels describe time --policy <access_policy_number>.

Expected Behavior

The configured time zone is honored and represented consistently. Specifically: the hour descriptions say the hour is expressed in access_time_zone, not in America/New_York; the level's title reflects the configured zone rather than asserting Eastern; and "Preserving" preserves — either the existing values are read back and re-written unchanged, or the operator is re-prompted with them as defaults, or the resource is left unmanaged so Terraform does not touch it.

Actual Behavior

Every user-facing surface asserts Eastern regardless of configuration, and the configured value does not survive a second run:

• access_start_hour / access_end_hour are documented as being "in America/New_York timezone" whatever access_time_zone is set to.
• The level is titled Business Hours East Coast whatever access_time_zone is set to.
• On any re-run through the wizard, the level is rewritten to the defaults: timezone reverts to America/New_York, hours to 07:00-21:00, days to Mon-Fri. For a deployment configured in America/Anchorage that shifts the effective window by four hours — an 08:00-18:00 Alaska window silently becomes 07:00-21:00 Eastern, i.e. 03:00-17:00 local. No warning, no prompt, and the console line says the opposite.

The net effect is that an operator who sets a non-Eastern zone has no surface anywhere — variable docs, level title, or a second wizard run — that agrees with what they configured.

Relevant Logs and Errors

No error is emitted — that is the defect. The only operator-visible signal is the line that misdescribes what happens:

--- Time Based Access ---
Found existing MANAGED Access Level 'time'. Preserving.

The resulting expression, rebuilt from the defaults:

request.time.getHours("America/New_York") >= 7 && request.time.getHours("America/New_York") <= 21 &&
request.time.getDayOfWeek("America/New_York") >= 1 && request.time.getDayOfWeek("America/New_York") <= 5

Suggested Fix

Defects 1 and 2 are one-liners. Change the access_start_hour / access_end_hour descriptions to say the hour is expressed in access_time_zone (naming America/New_York only as the default), and make the level title carry the configured zone — e.g. "Business Hours (${var.access_time_zone})" — instead of hardcoding East Coast.

Defect 3, in the "Preserving" branch, do one of:

1. Read the existing level back and populate ACCESS_* from it before the tfvars write, so the values round-trip; or
2. Re-prompt using the existing values as the defaults; or
3. Set CREATE_TIME_ACCESS="false" so Terraform stops managing a level the script has decided not to reconfigure — matching what "Preserving" already implies.

Whichever is chosen, the console message must match the behavior, and the same fix applies to the expire branch.

Additional Context

Found while running a deployment configured for America/Anchorage. Defect 3 is security-relevant rather than cosmetic: a time-based access control silently shifts its effective window on an ordinary re-run, and an operator who reads the "Preserving" line has no reason to re-check it. Defects 1 and 2 are what make it hard to catch — every label and description the operator can consult says Eastern, so the reset back to Eastern looks like the intended state.

Related: #186 covers the day-numbering mismatch in the same expression — the day prompts at deploy.sh:1155 / :1157 and the access_start_day / access_end_day descriptions all state 1=Mon, 7=Sun while CEL's getDayOfWeek() is 0-6. Between the two reports, every input to this one access level is either mis-documented or discarded on re-run; they are worth fixing together.