issue with secure-boot in at least Codespaces
メンテナーはふだん 2 日以内に返信
まだ誰も着手していません。
評価
- 難易度
- 5/5
- 見積もり時間
- 1週間以上
- 初心者へのやさしさ
- 35/100
- issue の種類
- バグ
- 明瞭さ
- おおむね明確
- 活発さ
- 停滞
- 技術スタック
- github, kubernetes, rust
調査の方向性
The report does not name implementation files or tests. Start by locating the libvirt run firmware selection and VM startup paths, then check how this project detects host virtualization and handles warnings. Reproduce the reported behavior in a nested environment if available; done means a documented limitation or an agreed detection and warning behavior, with tests covering the chosen behavior.
索引モデルが issue の本文から書いたものです。
説明
I haven't debugged this at all, but trying things out today bcvk was failing in a Codespaces instance with secure-boot, hit a KVM error.
Problem Description
VMs created with bcvk libvirt run using the default --firmware=uefi-secure fail to boot in nested virtualization environments (GitHub Codespaces, Azure VMs) with the error:
KVM: entry failed, hardware error 0xffffffff
... SMM=1 ...
The VM starts but immediately enters a paused state with "internal-error" status.
Root Cause
UEFI Secure Boot requires SMM (System Management Mode) support. When running KVM inside another hypervisor (nested virtualization), SMM emulation is incomplete and unreliable, particularly on Azure/Microsoft hypervisors. The OVMF firmware tries to enter SMM during Secure Boot initialization, which triggers a KVM hardware error that cannot be recovered.
Environment
- Platform: GitHub Codespaces (Azure nested virtualization)
- Host Hypervisor: Microsoft (detected via
systemd-detect-virt) - Nested KVM: Enabled (
/sys/module/kvm_amd/parameters/nested = 1) - QEMU: 10.1.2
- libvirt: 11.8.0
- Kernel: 6.8.0-1030-azure
Symptoms
- VM domain shows state:
paused (internal-error) - QEMU log shows:
KVM: entry failed, hardware error 0xffffffff EAX=00000000 EBX=b7e03d78 ECX=000000b2 EDX=000000b2 ... EIP=00008000 EFL=00000002 [-------] CPL=0 II=0 A20=1 SMM=1 HLT=0 - VM XML shows:
<feature enabled='yes' name='secure-boot'/> <smm state='on'/> <loader readonly='yes' secure='yes' type='pflash'>/usr/share/OVMF/OVMF_CODE_4M.ms.fd</loader>
Reproduction
# This will fail in nested virtualization:
bcvk libvirt run --name test quay.io/centos-bootc/centos-bootc:stream10
# Check VM state:
virsh domstate test
# Output: paused
# Check QEMU monitor:
virsh qemu-monitor-command test --hmp info status
# Output: VM status: paused (internal-error)
# Check logs:
cat ~/.cache/libvirt/qemu/log/test.log | grep "KVM.*error"
# Output: KVM: entry failed, hardware error 0xffffffff
Solutions
Option 1: UEFI without Secure Boot (Recommended)
Use --firmware=uefi-insecure to get UEFI boot without SMM requirements:
bcvk libvirt run --name test --firmware=uefi-insecure \
quay.io/centos-bootc/centos-bootc:stream10
Result: ✅ Works perfectly. UEFI boot, no Secure Boot, no SMM.
Option 2: Legacy BIOS
Use --firmware=bios for maximum compatibility:
bcvk libvirt run --name test --firmware=bios \
quay.io/centos-bootc/centos-bootc:stream10
Result: ✅ Works perfectly. Legacy BIOS boot, no UEFI.
Attempted Workarounds (All Failed)
The following were tested but did not resolve the SMM issue:
- CPU mode changes:
host-passthrough,host-model, custom CPU models all fail - Migratable flag: Setting
migratable=offmakes no difference - KVM parameters: No kernel module parameters can fix architectural limitations
- QEMU machine options: SMM issues are at the KVM level, not QEMU
Detection
We can reliably detect this problematic scenario before attempting to start a VM:
Detection Logic
fn is_nested_virtualization_risky() -> bool {
// Check if running in a VM
let in_vm = std::fs::read_to_string("/proc/cpuinfo")
.map(|s| s.contains("hypervisor"))
.unwrap_or(false);
// Check if nested KVM is enabled
let nested_kvm = std::fs::read_to_string("/sys/module/kvm_amd/parameters/nested")
.or_else(|_| std::fs::read_to_string("/sys/module/kvm_intel/parameters/nested"))
.map(|s| s.trim() == "1" || s.trim() == "Y")
.unwrap_or(false);
in_vm && nested_kvm
}
Detection Signals
| Check | Command | Expected in Nested Virt |
|---|---|---|
| Hypervisor present | grep hypervisor /proc/cpuinfo |
Match found |
| Hypervisor vendor | lscpu | grep "Hypervisor vendor" |
Shows "Microsoft" (Azure) |
| systemd-detect-virt | systemd-detect-virt |
Returns non-"none" |
| DMI vendor | cat /sys/devices/virtual/dmi/id/sys_vendor |
"Microsoft Corporation" |
| Nested KVM | cat /sys/module/kvm_*/parameters/nested |
"1" or "Y" |
Recommended Warning
When --firmware=uefi-secure is used and nested virtualization is detected:
WARNING: Nested virtualization detected (Hypervisor: Microsoft)
UEFI Secure Boot (--firmware=uefi-secure) requires SMM which often
fails in nested environments.
Recommended alternatives:
--firmware=uefi-insecure (UEFI without Secure Boot)
--firmware=bios (Legacy BIOS, most compatible)
Continue anyway? [y/N]
Technical Background
Why SMM Fails in Nested Virtualization
- SMM Architecture: SMM is a special x86 CPU mode for firmware operations
- Nested KVM Limitation: KVM's nested virtualization doesn't fully emulate SMM
- OVMF Requirement: OVMF Secure Boot firmware requires functional SMM
- Azure Specific: Azure's hypervisor is optimized for Hyper-V, not nested KVM
Error Details
The error occurs when:
- libvirt starts QEMU with
smm=onand Secure Boot OVMF firmware - OVMF initializes and attempts to enter SMM
- Nested KVM cannot handle the SMM state transition
- CPU registers show
SMM=1flag set at time of error - VM pauses with "internal-error" and cannot recover
Research References
- KVM Nested Limitations: https://docs.kernel.org/virt/kvm/x86/running-nested-guests.html
- Libvirt Secure Boot: https://libvirt.org/kbase/secureboot.html
- TianoCore SMM Testing: https://github.com/tianocore/tianocore.github.io/wiki/Testing-SMM-with-QEMU,-KVM-and-libvirt
- Red Hat Bug #1308678: OVMF binary separation for SB+SMM vs non-SMM variants
Related Issues
- Affects all nested KVM environments (not just Azure)
- Proxmox nested virtualization shows similar issues
- Some cloud providers (AWS bare metal) may work better
- Issue has existed in KVM for multiple kernel versions
Testing Notes
Tested configurations:
- ✅
--firmware=uefi-insecure: Works, VM boots successfully - ✅
--firmware=bios: Works, VM boots successfully - ❌
--firmware=uefi-secure+host-passthrough: Fails with SMM error - ❌
--firmware=uefi-secure+host-model: Fails with SMM error - ❌
--firmware=uefi-secure+migratable=off: Fails with SMM error
Recommendations
For bcvk/bootc Development
- Add detection heuristic to warn users in nested virt scenarios
- Change default to
--firmware=uefi-insecurewhen nested virt detected - Document limitation in README/docs
- CI/CD: Use
--firmware=uefi-insecurein GitHub Actions/Codespaces
For Users
- In nested environments: Always use
--firmware=uefi-insecureor--firmware=bios - For Secure Boot: Test on bare metal or non-nested KVM hosts
- For development/testing:
--firmware=biosis fastest and most compatible
Investigation Date
2025-11-10
- 主要言語
- Rust
- スター
- 142
- フォーク
- 40
- 平均マージ
- 2日 22時間
- マージ済み PR(30日)
- 10
環境構築
このプロジェクトの開発コンテナを、あなたの GitHub アカウントでブラウザ上に起動します。
- Dockerfile・Docker Compose ファイルなし
- プルリクエストのテンプレートなし
- コントリビューションガイドなし
はじめの一歩
- issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
- 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
- リポジトリをフォークし、ブランチを切って変更します。
- issue 番号を参照したプルリクエストを送ります。
bootc-dev/bcvk のほかの issue
-
難易度 4/5 3〜5日 初心者へのやさしさ 48/100
メンテナーはふだん 2 日以内に返信
-
難易度 3/5 半日 初心者へのやさしさ 45/100
bootc-dev/bcvk#416 · コメント 1 件 ·
メンテナーはふだん 2 日以内に返信
-
難易度 3/5 半日 初心者へのやさしさ 50/100
メンテナーはふだん 2 日以内に返信
-
extend host testingオープン
難易度 4/5 3〜5日 初心者へのやさしさ 43/100
メンテナーはふだん 2 日以内に返信
-
難易度 5/5 1週間以上 初心者へのやさしさ 35/100
bootc-dev/bcvk#386 · リアクション 1 件 ·
メンテナーはふだん 2 日以内に返信
似ている issue
-
llm translation
難易度 2/5 1〜3時間 初心者へのやさしさ 82/100
メンテナーはふだん 1 日以内に返信
-
難易度 1/5 1時間未満 初心者へのやさしさ 85/100
メンテナーはふだん 1 日以内に返信
-
documentation good first issue trivial
難易度 1/5 1〜3時間 初心者へのやさしさ 84/100
メンテナーはふだん 1 日以内に返信
-
[Bug]: layer.move to the place a layer already has fails and stops a script; with several layers it leaves an empty undo step対応中かも @jgregoriorincon が今日担当しました。 オープン
難易度 2/5 1〜3時間 初心者へのやさしさ 78/100
opengeos/RustGIS#2621 · コメント 1 件 ·
メンテナーはふだん 1 日以内に返信
-
good first issue web
難易度 1/5 1時間未満 初心者へのやさしさ 92/100
メンテナーはふだん 1 日以内に返信