Hacktoberfest 2026:メンテナが10月に向けて印を付けた、オープンで初心者向けの issue。 Hacktoberfest の issue を見る

USB: implement HID class-specific control requests

オープン
#454 コメント 0 件 リアクション 0 件 担当者 0 名 GitHub で見る

メンテナーはふだん 1 日以内に返信

まだ誰も着手していません。

評価

難易度
4/5
見積もり時間
3〜5日
初心者へのやさしさ
18/100
issue の種類
機能追加
明瞭さ
おおむね明確
活発さ
停滞
技術スタック
zig
領域
embedded-iot

調査の方向性

Start with the follow-up thread in #449 to see how the HID control requests are currently acknowledged, then find where the USB class control requests are dispatched. Implement SetIdle and SetProtocol first, since they only change device state. SetReport needs an application-facing callback, which is a design decision, so confirm the approach with maintainers before writing it. Done means each request does what the USB HID spec requires and is covered by a test or a hardware check.

索引モデルが issue の本文から書いたものです。

説明

usb

These are currently ACKed without properly performing the requested tasks:

  • SetIdle: Requests bandwidth limits on the device.
  • SetProtocol: Switches between boot/non-boot report formats.
  • SetReport: Send report to a device, e.g. turn on a LED. Requires some architecture in MicroZig for having application code handle this event.

Follow-up from #449

主要言語
Zig
スター
2.3k
フォーク
198
平均マージ
1日 8時間
マージ済み PR(30日)
37

環境構築

このプロジェクトには開発コンテナ、Dockerfile、コントリビューションガイドがありません。まず README を読み、一般的な手順ははじめてのコントリビューションガイドを参照してください。

はじめの一歩

  1. issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
  2. 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
  3. リポジトリをフォークし、ブランチを切って変更します。
  4. issue 番号を参照したプルリクエストを送ります。

ZigEmbeddedGroup/microzig のほかの issue

ZigEmbeddedGroup/microzig の issue をすべて見る

似ている issue

Embedded & IoT の issue をもっと見る

新しい issue をメールで受け取る

初心者向けの GitHub issue を短くまとめたダイジェスト。