Border missmatch between DefaultImageableArea settings in Generic-PCL_6_PCL_XL_Printer-pxlcolor.ppd and printout
メンテナーはふだん 1 日以内に返信
まだ誰も着手していません。
評価
調査の方向性
Start by locating the PPD option definitions for DefaultImageableArea in Generic-PCL_6_PCL_XL_Printer-pxlcolor.ppd and compare the configured margins with the reported printout. Check whether this repository handles those settings or whether the observed failure is in the Kyocera filter or CUPS pipeline; the report also mentions pdftopdf failing but gives no logs. Done means identifying the responsible component and reproducing or correcting the margin mismatch.
索引モデルが issue の本文から書いたものです。
説明
According the setting in the PPD file I should have 6.35 mm margin on the left and right side of the printout and 12.7 mm on the top and bottom side, which is much more than the hardware limits of my printer Kyocera MA4000cix are. This is absolutely not acceptable, and there is no way to use the PPD file from the supplier.
I used it to install the kyocera manufacturer PPD for my printer, I also copied the Kyofilter_h**** files to /usr/lib/cups/filter/ and set their permission to 755. But when I use the Print Settings app from manjaro to print a test page I get this “Printer State” error “Processing - pdftopdf filter function failed”, but I don’t find anything helpful in the internet to solve it.
I'm more and more frustrated about about Linux after over 25 years of use. 15 years ago, installing a printer was a question of minutes, today you can spend days without success. I really consider to switch back to Windows cause I'm tired of being a tester of useless software which cups has become. In the past you could install the manufacturer PPD and everything was fine. Now cups inhibits that for whatever reason ever and you stand before a printer that cannot brought to work correctly thanks to cups
- 主要言語
- C
- スター
- 20
- フォーク
- 89
- 平均マージ
- 13時間 37分
- マージ済み PR(30日)
- 50
環境構築
- Dockerfile・Docker Compose ファイルなし
- プルリクエストのテンプレートなし
- コントリビューションガイドを読む
はじめの一歩
- issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
- 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
- リポジトリをフォークし、ブランチを切って変更します。
- issue 番号を参照したプルリクエストを送ります。
OpenPrinting/libcupsfilters のほかの issue
-
難易度 2/5 1〜3時間 初心者へのやさしさ 75/100
OpenPrinting/libcupsfilters#257 · コメント 22 件 ·
メンテナーはふだん 1 日以内に返信
-
難易度 1/5 1〜3時間 初心者へのやさしさ 85/100
OpenPrinting/libcupsfilters#222 · コメント 3 件 · リアクション 1 件 ·
メンテナーはふだん 1 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 78/100
OpenPrinting/libcupsfilters#174 ·
メンテナーはふだん 1 日以内に返信
-
難易度 4/5 3〜5日 初心者へのやさしさ 48/100
OpenPrinting/libcupsfilters#355 ·
メンテナーはふだん 1 日以内に返信
-
難易度 4/5 3〜5日 初心者へのやさしさ 48/100
OpenPrinting/libcupsfilters#339 · コメント 3 件 · リアクション 1 件 ·
メンテナーはふだん 1 日以内に返信
OpenPrinting/libcupsfilters の issue をすべて見る
似ている issue
-
bug
難易度 2/5 1〜3時間 初心者へのやさしさ 84/100
メンテナーはふだん 1 日以内に返信
-
enhancement
難易度 2/5 1〜3時間 初心者へのやさしさ 68/100
ChupathingyCE/chupathingyce#1550 ·
メンテナーはふだん 1 日以内に返信
-
[BUG] SWAPDB sends no invalidation to CLIENT TRACKING clients対応中かも このイシューにリンクされたプルリクエストがオープン中、またはマージ済みです。 オープン
難易度 2/5 1〜3時間 初心者へのやさしさ 83/100
redis/redis#16302 · コメント 1 件 ·
メンテナーはふだん 1 日以内に返信
-
slice
難易度 2/5 1〜3時間 初心者へのやさしさ 73/100
Life-Framework/Life-Framework#3878 ·
メンテナーはふだん 1 日以内に返信
-
`sha256()` returns a wrong hash when libsql-ffi is built with gcc 11 or later対応中かも @colinhacks が今日担当しました。 オープン
難易度 2/5 1〜3時間 初心者へのやさしさ 78/100
tursodatabase/libsql#2333 ·
メンテナーはふだん 11 日以内に返信