Runtime D3 (RTD3) disabled on Lenovo LOQ 15IAX9 due to SBIOS NV_ERR_INVALID_DATA (0x25) in platform_request_handler_ctrl.c (Driver 615.78.08)

オープン
  • 何か問題がありますか？
#1,489 コメント 2 件 リアクション 0 件 担当者 0 名 GitHub で見る

メンテナーはふだん 1 日以内に返信

まだ誰も着手していません。

評価

難易度
5/5
見積もり時間
1週間以上
初心者へのやさしさ
35/100
issue の種類
バグ
明瞭さ
おおむね明確
活発さ
活発
技術スタック
c, linux

調査の方向性

Start by examining the reported PlatformRequestHandler failures at platform_request_handler_ctrl.c:2118 and :2175, then trace how those errors lead to Runtime D3 being marked unsupported. Reproduce on the Lenovo LOQ 15IAX9 with driver 615.78.08 and inspect the attached nvidia-bug-report log. Done means the GPU can enter Runtime D3 when idle despite the SBIOS returning NV_ERR_INVALID_DATA.

索引モデルが issue の本文から書いたものです。

説明

bug
NVIDIA Open GPU Kernel Modules Version

615.78.08

Please confirm this issue does not happen with the proprietary driver (of the same version). This issue tracker is only for bugs specific to the open kernel driver.
  • I confirm that this does not happen with the proprietary driver package.
Operating System and Version

CachyOS

Kernel Release

7.3.0-4-cachyos #1 SMP PREEMPT_DYNAMIC Fri, 23 Oct 2026 15:03:58 +0000 x86_64 GNU/Linux

Please confirm you are running a stable release kernel (e.g. not a -rc). We do not accept bug reports for unreleased kernels.
  • I am running on a stable kernel release.
Hardware: GPU

GPU 0: NVIDIA GeForce RTX 3050 6GB Laptop GPU (UUID: GPU-7181b4f5-7620-7aa1-e059-5b3dc0b5c465)

Describe the bug

On the Lenovo LOQ 15IAX9 (Intel i5-12600HX + RTX 3050 Laptop GPU), the discrete GPU fails to transition into Runtime D3 (D3cold) and remains permanently stuck idling in D0/P8 state (consuming ~3.18W).

During driver initialization, calls to PlatformRequestHandler fail because the SBIOS returns NV_ERR_INVALID_DATA (0x00000025) when querying target temperature and platform power modes (platform_request_handler_ctrl.c:2175 and platform_request_handler_ctrl.c:2118). Following this assertion failure, the driver marks Runtime D3 status: Not supported in /proc/driver/nvidia/gpus/0000:01:00.0/power.

This occurs despite user-space and kernel configurations being set correctly (NVreg_DynamicPowerManagement=0x02, udev runtime PM rules active, companion HD audio controller entering suspended/D3hot, and PCIe upstream bridge 0000:00:01.0 having d3cold_allowed=1).

To Reproduce

Markdown

  1. Boot a Lenovo LOQ 15IAX9 laptop (Intel Core i5-12600HX, RTX 3050 6GB Laptop GPU) into Linux with nvidia-open (version 615.78.08).
  2. Configure fine-grained dynamic power management in /etc/modprobe.d/nvidia.conf: 
    options nvidia NVreg_DynamicPowerManagement=0x02

 Set runtime PM to auto for upstream PCIe root port (0000:00:01.0), GPU (0000:01:00.0), and audio (0000:01:00.1) via udev rules.

 Ensure no display server or application holds open references to the discrete GPU (fuser /dev/nvidia* is clean).

 Inspect driver runtime power interface:
 Bash

 cat /proc/driver/nvidia/gpus/0000:01:00.0/power

 Observe that Runtime D3 status reports Not supported.

 Inspect the kernel log:
 Bash

 sudo dmesg | grep -i PlatformRequestHandler

 Observe the assertion failures: NV_ERR_INVALID_DATA (0x00000025) returned from PlatformRequestHandler at platform_request_handler_ctrl.c:2175 and platform_request_handler_ctrl.c:2118.
Bug Incidence

Always

nvidia-bug-report.log.gz

nvidia-bug-report.log.gz

More Info
Expected Behavior

When idle and with no active clients holding /dev/nvidia*, the discrete GPU should transition into Runtime D3 (D3cold) state to save power (~0W). Failure to retrieve platform target temperature or power modes from SBIOS (0x00000025 / NV_ERR_INVALID_DATA) should gracefully fall back to default driver thermal/power limits or be bypassed via a quirk, rather than completely disabling Runtime D3 platform support.

Additional Information
  • The companion HD Audio controller (0000:01:00.1) enters D3hot / suspended without issue.
  • The upstream root port (0000:00:01.0) has d3cold_allowed=1 and ASPM is active.
  • Under Windows on the exact same hardware, the dGPU powers down fully to D3cold / 0W, verifying that the hardware power-gating rails are fully capable of D3cold.
  • Tested with both standard and custom ACPI OSI parameters (e.g., acpi_osi="Windows 2022"), but the SBIOS continues to return 0x25 to PlatformRequestHandler calls in Linux.
主要言語
C
スター
17.5k
フォーク
1.9k
30日以内にマージされた PR はありません

環境構築

はじめの一歩

  1. issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
  2. 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
  3. リポジトリをフォークし、ブランチを切って変更します。
  4. issue 番号を参照したプルリクエストを送ります。

NVIDIA/open-gpu-kernel-modules のほかの issue

NVIDIA/open-gpu-kernel-modules の issue をすべて見る

似ている issue

C の issue をもっと見る

新しい issue をメールで受け取る

初心者向けの GitHub issue を短くまとめたダイジェスト。