Hacktoberfest 2026:メンテナが10月に向けて印を付けた、オープンで初心者向けの issue。 Hacktoberfest の issue を見る

Calculation summary: the job's allocation and how much of it is left (projinfo / Slurm)

オープン
#613 コメント 0 件 リアクション 0 件 担当者 0 名 GitHub で見る

まだ誰も着手していません。

評価

難易度
5/5
見積もり時間
1週間以上
初心者へのやさしさ
35/100
issue の種類
機能追加
明瞭さ
おおむね明確
活発さ
活発
技術スタック
c, linux

調査の方向性

Start by reading the calculation summary's Launcher block and the shared SSH connection work referenced in #487 and #599; then review #541 for how accounts are stored per allocation. Identify the machine registration path for the allocation command and how remote commands are cached. Done means the summary can show the allocation, remaining core-hours, and read time, while missing or failed commands display nothing; the issue calls for design review of the remote-shell behavior.

索引モデルが issue の本文から書いたものです。

説明

Andy 2026-10-27: on a cluster with a limited allocation, the calculation summary's Launcher block (Machine, Processors, Start Date, Comp. Date) should show the allocation the job runs under and how much of it is left.

  • Allocation: the account/project the job was submitted with (the Slurm --account, as stored at launch).
  • Left: core-hours used / allocated, from the site's own tool where there is one (HPC2N/NAISS: projinfo), else Slurm (sshare -A <account> / sreport), set per machine in Register Machines ("Allocation command", empty = not shown).
  • Read over the machine's shared ssh connection (#487/#599), no new login; at most every 15 min per machine and account, cached; shown with when it was read ("checked 10:20"). A failed or missing command shows nothing rather than an error.
  • Goes with #541 (several allocations on one compute machine), which stores the account per allocation.

Remote-shell code: design review before the change (no extra prompts, nothing run on a machine that has no allocation command).

主要言語
C
スター
10
フォーク
8
平均マージ
1時間 45分
マージ済み PR(30日)
5

環境構築

このプロジェクトには開発コンテナ、Dockerfile、コントリビューションガイドがありません。まず README を読み、一般的な手順ははじめてのコントリビューションガイドを参照してください。

はじめの一歩

  1. issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
  2. 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
  3. リポジトリをフォークし、ブランチを切って変更します。
  4. issue 番号を参照したプルリクエストを送ります。

FriendsofECCE/ECCE のほかの issue

FriendsofECCE/ECCE の issue をすべて見る

似ている issue

C の issue をもっと見る

新しい issue をメールで受け取る

初心者向けの GitHub issue を短くまとめたダイジェスト。