BUG: Fix MINOR defects found by the filter sweep and reviews
メンテナーはふだん 6 日以内に返信
まだ誰も着手していません。
評価
調査の方向性
Choose one numbered checklist item and read its linked source location; the issue describes the trigger and expected defect for each item. Start by reproducing that trigger with a small test that fails on develop, when a test can show the defect. Done means the individual defect is fixed, its test passes, and the item is ticked after the fix merges.
索引モデルが issue の本文から書いたものです。
説明
Summary
2026-11-13: PRs #1961, #1962, #1965, #1967, #1968, #1969, #1970, #1971 and #1972 were closed and combined into #1973, which is built and tested with the combined EbsdLib branch BlueQuartzSoftware/EbsdLib#86 (it holds EbsdLib #70 to #85, which were closed into it). Items that named one of these pull requests now also name #1973. No item is ticked until #1973 is merged.
This issue collects the MINOR code defects of simplnx in one place. MINOR means: bad or missing error messages, latent defects, wrong preflight values, stray objects, and undefined behavior that does not give wrong output yet. A MINOR defect does not crash and does not write wrong data in normal use.
The items come from three sources:
- 15 items moved from #1908 (one-off defects found by the filter sweep). #1908 now keeps only CRASH, WRONG_DATA and ERROR items.
- 3 items moved from #1899 (defects found while reviewing the port-regression fixes). #1899 now keeps only documentation and comment defects.
- 12 new items found while reviewing PR #1915. Each one was checked on develop a7dffc440 (2026-11-04), and the links of the new items use that commit.
- 1 new item (M32) found while reviewing PR #1923. It was checked on develop a7dffc440 (2026-11-05), and its links use that commit.
The checklist has 32 items (M01 to M32): 24 in SimplnxCore filters, 5 in core library code, and 3 in ImageProcessing filters. Moved items keep their original text and links, and name their old item number (for example "was #1908 item L31").
Every item is a candidate. Nobody ran the trigger yet. Each checklist line gives the trigger in plain words.
Each item keeps its M number. The numbers do not change; a fixed item is ticked, not removed. Refer to an item by its number in commits and pull requests, for example "Fixes #1917 item M07".
Mechanism
There is no common mechanism. Each item has its own cause, for example a missing input check, a format string with no placeholder, a narrowing cast or a clone() that drops a member. Some items are in shared code (RenameDataAction.cpp, UpdateImageGeomAction.cpp, ImageRotationUtilities.cpp). A fix there changes all filters that use that code.
An example (AlignSectionsFeatureCentroidFilter, MINOR, item M03). The format string has no {} placeholder, so fmt::format ignores iter. The user sees "Slice=" with no slice number:
AlignSectionsFeatureCentroid.cpp#L166-L171
if(std::isnan(xCentroid[iter]) && !xWarning)
{
std::string message = fmt::format("The X Centroid was NaN. All subsequent slices are probably wrong. Slice=", iter);
m_MessageHandler.sendInfoMessage(message);
xWarning = true;
}
Rule
- Each item needs its own fix. There is no shared helper for this issue.
- Every fix starts with a unit test that fails on develop, when a test can show the defect.
- Put checks in preflight when they do not need array values. Put value checks in execute.
- An error message must name the parameter, the object path and the bad value.
- When a new preflight check makes an execute-time check unreachable, remove the execute-time check.
How to fix
- Pick one checklist line. Read the code at the permalink.
- Write the failing test first (see "How to test").
- Make the smallest change that fixes the trigger. Each checklist line names the cause.
- If the fix is in shared code, run the tests of every filter that uses that code.
- A new filter error code must be more negative than -10000 and must be in the range that the filter already uses. Check that the code is unique with
git grep -nE -- "-NNNN([^0-9]|$)"(do not use\b). - Name the item number in the commit message and in the pull request, and tick the item here when the pull request merges.
How to test
- Write the test before the fix. The test must fail on develop.
- Use the trigger from the checklist line as the test input. Make the input as small as possible (for example a 3x3x3 Image Geometry).
- Bad error message: assert the error code, and assert that the message names the real cause.
- Wrong preflight value: compare the preflight value with the value that execute produces.
- Undefined behavior (NaN cast, signed overflow): the test must fail under UndefinedBehaviorSanitizer or AddressSanitizer before the fix.
- Stray objects or extra files: assert that the object or file does not exist after the filter runs.
- For filters with Direct and Scanline algorithms, run the test in both through the existing algorithm-selection test scope (
UnitTest::SelectAlgorithmTestScenariosForInMemoryStores()orAlgorithmTestScope). - Comment-only or latent items (for example a
clone()that is not used in normal execution) may not need a filter test. Test the class directly, or say in the PR why no test is possible. - If you cannot reproduce an item, do not force a fix. Write the reason in the PR and on this issue.
Conventions
- Use one PR for each group of related fixes (for example all ExecuteProcessFilter items). Use one commit for each filter.
- Commit prefix
BUG:. Add aSigned-off-byline. Do not add AI attribution. - Every fix starts with a unit test that fails on develop.
- Value checks need an independent expected result (oracle), not the output of the code.
- Run ctest serially. Never use
-j, because the tests depend on each other. - Format with clang-format 19.1.1 and the repository
.clang-format. - Do not add per-filter documentation sentences about input requirements. The generated parameter table documents them.
- If a fix touches a filter that has a V&V report (
src/Plugins/<Plugin>/vv/<Filter>.md), update every file of that V&V package (report, deviations, provenance, test tables). V&V documents reference DREAM3D 6.5.171 only. - Rebase on develop. Never merge develop into the branch.
Checklist
The list is grouped by plugin. Items in core library code (src/simplnx/...) are in their own group and name the filter that shows the defect.
SimplnxCore (27 items)
- M01 · MINOR · AddBadDataFilter · AddBadData.cpp:143 — std::mt19937 truncates the uint64 seed to 32 bits. Seeds 1 and 2^32+1 give the same output. (was #1908 item L31)
AddBadDataFilter#5 - M02 · MINOR · AlignSectionsFeatureCentroidFilter · AlignSectionsFeatureCentroid.cpp:182 — With Use Reference Slice on and Store Alignment Shifts on, each row of the Slices array names
slice + 1(the neighbor slice) as the second slice. But the shift in that row is calculated against the reference slice, so the row names the wrong slice. The Scanline path has the same code at line 401. The filter page (AlignSectionsFeatureCentroidFilter.md:58) does not say what the second index means in this mode. - M03 · MINOR · AlignSectionsFeatureCentroidFilter · AlignSectionsFeatureCentroid.cpp:168 — The "X Centroid was NaN" and "Y Centroid was NaN" messages call
fmt::format("... Slice=", iter)with no{}placeholder, so the slice number is never printed. A slice with no selected mask cells gives a NaN centroid (0 / 0) and sends this message. The same defect is at lines 174, 225, 231, 364 and 369. -
M04 · MINOR · ArrayCalculatorFilter · ArrayCalculator.cpp:1677 — An index after a closing parenthesis, as in— moved to #1867 class C07u.("MC")[0] + "Scalar1", is not used in the shape check. A valid expression fails with -4024 or -4016. (was #1908 item L32)ArrayCalculatorFilter#8 - M05 · MINOR · CombineTransformationMatricesFilter · CombineTransformationMatricesFilter.cpp:122 — The component-count check is inside the inner loop and never runs for the last array. Validation depends on the input order. (was #1908 item L33)
CombineTransformationMatricesFilter#2 - M06 · MINOR · ComputeArrayHistogramByFeatureFilter · ComputeArrayHistogramByFeatureFilter.cpp:185 — Output DataGroup Path accepts an Attribute Matrix, but a DataGroup cannot go into one. Preflight fails with the generic error -5301. (was #1908 item L34)
ComputeArrayHistogramByFeatureFilter#9 - M07 · MINOR · ComputeArrayHistogramFilter · ComputeArrayHistogramFilter.cpp:82 — Output DataGroup Path accepts an Attribute Matrix, but the filter always inserts a DataGroup. Preflight fails with a generic action error. (was #1908 item L35)
ComputeArrayHistogramFilter#8 - M08 · MINOR · ComputeBoundingBoxStatsFilter · ComputeBoundingBoxStatsDirect.cpp:81 — A NaN bound (ComputeFeatureBoundsFilter writes NaN rows for empty Features) goes to std::floor and a cast to usize, which is undefined behavior. (was #1908 item L36)
ComputeBoundingBoxStatsFilter#8 - M09 · MINOR · ComputeFeatureClusteringFilter · ComputeFeatureClustering.cpp:104 — In the random reference distribution, a distance equal to the maximum goes to bin
NumberOfBins + 1, which is never used. In the measured RDF, a distance equal to the maximum goes into the last bin (lines 295-297 and 318-320). So the last RDF bin is divided by a reference count that is slightly too small (line 341). #1820 does not cover this bin convention. - M10 · MINOR · CreatePythonSkeletonFilter · CreatePythonSkeletonFilter.cpp:108 — A trailing separator in Existing Plugin Location gives an empty plugin name. Files go to the wrong folders before the filter fails with -2000. (was #1908 item L37)
CreatePythonSkeletonFilter#4 - M11 · MINOR · ExecuteProcessFilter · ExecuteProcess.cpp:174 — The argument parser splits Command Line Arguments only on the space character. A tab, CR or LF does not separate arguments, so
prog<TAB>--helpis one token. The filter page (ExecuteProcessFilter.md:11) says that the arguments follow "the same general rules" as a terminal. - M12 · MINOR · ExecuteProcessFilter · ExecuteProcess.cpp:158 — A quote inside a token, or next to a token, splits the token. It does not join it.
"a"bgives the two tokensaandb, anda"b c"dgivesa"bandc"d. There is no escape for a literal quote. - M13 · MINOR · ExecuteProcessFilter · ExecuteProcess.cpp:163 — A quote with no closing quote is accepted with no message, and the argument continues to the end of the string.
prog "passes an empty argument to the program. - M14 · MINOR · ExecuteProcessFilter · ExecuteProcess.cpp:156 — The parser uses
intindexes. It stores thesize_tresult offind_first_ofin anintand compares it with -1 to detectstd::string::npos. This is a narrowing and sign-compare defect that clang-tidy reports. A string longer than INT_MAX characters gives wrong indexes. - M15 · MINOR · FlyingEdges3DFilter · FlyingEdges3D.cpp:88 —
auto triangleGeom = getDataRefAs<TriangleGeom>(...)copies the geometry. The destructor of the copy sends a false DataRemovedMessage for the live geometry id. (was #1908 item L40)FlyingEdges3DFilter#7 -
M16 · MINOR · LabelTriangleGeometryFilter · LabelTriangleGeometry.cpp:38 — The filter deletes Element Neighbors and Elements Containing Vert even when they existed before it ran. Preflight does not declare the deletion. (was #1908 item L41)— moved to #1861 C01e.LabelTriangleGeometryFilter#2 - M17 · MINOR · MapPointCloudToRegularGridFilter · MapPointCloudToRegularGridFilter.cpp:362 — With Use Mask Array off, preflight creates a root DataArray 'temp_mask'. An existing object with that name makes the filter fail. (was #1908 item L42)
MapPointCloudToRegularGridFilter#5 - M18 · MINOR · ReadVtkStructuredPointsFilter · ReadVtkStructuredPoints.cpp:854 — The POINT_DATA or CELL_DATA tuple count is parsed as
int32. The code compares it with theusizeproduct of the dimensions (lines 871 and 888), and nothing checks that product for overflow. A file with more than INT32_MAX tuples cannot be read, and very large DIMENSIONS values can wrap the product. - M19 · MINOR · ScalarSegmentFeaturesFilter · ScalarSegmentFeatures.cpp:209 — The fallback comparators get
static_cast<T>(ScalarTolerance), so a negative tolerance wraps for unsigned types (uint64: -1 becomesUINT64_MAX, and every pair matches) and a large tolerance is truncated for small types (int8: 300 becomes 44). (was #1899 item D04)- The buffered path compares in
float64and does not have this problem. - The fallback runs only when
areNeighborsSimilar()is called outside the buffered CCL, for example through the publicexecuteCCL()afteroperator()().
- The buffered path compares in
- M20 · MINOR · ScalarSegmentFeaturesFilter · ScalarSegmentFeatures.cpp:120 — In the fallback comparator,
m_Data[index] - m_Data[neighIndex]overflows for int32 and int64 at the type limits (for exampleINT32_MAX - INT32_MIN), which is undefined behavior. (was #1899 item D05)- The class comment states this as a precondition, but nothing enforces it. The reach is the same as the item above.
- On develop a7dffc440, the int64 case is fixed (the difference is calculated in uint64). The int32 case still overflows.
- M21 · MINOR · SetImageGeomOriginScalingFilter · SetImageGeomOriginScalingFilter.cpp:126 — The 'Image Geometry [After Update]' preflight value ignores Set Origin, Set Spacing and the center-origin option. (was #1908 item L49)
SetImageGeomOriginScalingFilter#3 - M22 · MINOR · WriteStlFileFilter · WriteStlFile.cpp:610 — When the face count is an exact multiple of the per-file maximum, the filter writes one extra, empty STL file. (was #1908 item L50)
WriteStlFileFilter#3 - M23 · MINOR · WriteVtkRectilinearGridFilter · WriteVtkRectilinearGrid.cpp:87 — The return values of the header
fprintfcalls (lines 87-99) and of the ASCII coordinatefprintfcalls (lines 129-140) are not checked. When the disk is full, the file is truncated and the filter reports success. Line 105 also prints the coordinate count with%lldfrom along long unsignedcast, which is a format mismatch. The finalfclose(line 77) is not checked either: buffered data that cannot be written when the file is closed is reported as success, and the filter then commits the truncated temporary file over the output file. - M24 · MINOR · WriteVtkStructuredPointsFilter · WriteVtkStructuredPoints.cpp:223 — Follow-up: in ASCII mode, floats are written with
fmt::format("{}"), so a subnormal value is written as a token such as1e-45(float32) or5e-324(float64), and some VTK readers reject such a token and lose the values after it. (was #1899 item D06)- Review probes: standalone VTK 9.6.2 and ParaView 6.0.0 both failed on the subnormal cases.
- The port-regression fix branch changes WriteVtkRectilinearGridFilter to the same
{}format. After that fix, both ASCII VTK writers have this behavior. Before it, the rectilinear writer wrote such values as0.000000. - Decide on one policy for both writers, and test it with the target readers.
- M33 · MINOR · ScalarSegmentFeaturesFilter · ScalarSegmentFeaturesFilter.cpp:128 — Feature Ids are created next to the selected input array (line 111), but their tuple shape is rebuilt from the grid dimensions. When that parent Attribute Matrix has another valid shape with the same count (for example
{24}for a{2,3,4}grid), Feature Ids get a shape that differs from their matrix. Take the shape from the parent Attribute Matrix when there is one. -
M35 · MINOR · CopyDataObjectFilter · CopyDataObjectFilter.cpp:109 — Copying an array into an Attribute Matrix with the same tuple count but another shape only warns (-27361) and keeps the source shape, so the copy's shape differs from its matrix. Decide whether the copy takes the destination matrix's shape (flat values unchanged) or preflight rejects it.— moved to #1867 class C07n. - M36 · MINOR · ReshapeDataArrayFilter · ReshapeDataArrayFilter.cpp:122 — Reshaping an array that lives in an Attribute Matrix leaves the matrix unchanged, so a new tuple shape with the same count (for example
{2,3,4}for a{4,3,2}cell matrix) succeeds and no longer matches the matrix. Suggested fix: reject a new tuple shape that differs from the owning Attribute Matrix; keep reshaping arrays that have no owning matrix.
Core library (7 items)
- M25 · MINOR · ApplyTransformationToGeometryFilter · ImageRotationUtilities.cpp:52 — For an Image Geometry, the output spacing on each axis comes from one input axis only: the input axis that is most parallel to the transformed axis (this dominant-axis rule is used at line 83). For a general affine matrix (non-uniform scale with an off-axis rotation), the output grid can be coarser than the input in some directions, so some source cells are not sampled. RotateSampleRefFrameFilter uses the same code. There is no defined expected result (oracle) for this case yet. PR #1915 lists this as "Not changed". This is not #1908 item L28 (wrong axis for 3-cycle rotations).
- M26 · MINOR · RenameDataObjectFilter · RenameDataAction.cpp:76 — With Allow Overwrite on, the rename fails with -6601 when any ancestor has the new name, but no sibling would be overwritten. (was #1908 item L46)
RenameDataObjectFilter#3 - M27 · MINOR · RenameDataObjectFilter · RenameDataAction.cpp:146 — RenameDataAction::clone() drops m_Overwrite. Latent, because normal execution moves actions. (was #1908 item L47)
RenameDataObjectFilter#5 - M28 · MINOR · SetImageGeomOriginScalingFilter · UpdateImageGeomAction.cpp:63 — UpdateImageGeomAction::clone() drops m_CenterOrigin. Latent, because normal execution moves actions. (was #1908 item L48)
SetImageGeomOriginScalingFilter#2 - M32 · MINOR · Dream3dIO (single-object import from a DREAM.3D 6.x file) · Dream3dIO.cpp:1226 —
readLegacyArraycallsreadLegacyStringArray(dataStructure, dataArraySet, preflight)andreadLegacyDataArray(dataStructure, dataArraySet, preflight)(lines 1226 and 1230). The third parameter of both functions isparentId, so theboolvaluefalsebecomes parent ID 0, and the realpreflightparameter keeps its default valuefalse. The NeighborList branch (line 1222) also gives parent ID 0. No object has ID 0, because IDs start at 1 (DataStructure.hpp:695), so the array cannot be inserted. Found while reviewing PR #1923.- Trigger: call
DREAM3D::ImportDataObjectFromFileorDREAM3D::ImportSelectDataObjectsFromFilewith a 3-part path (Data Container / Attribute Matrix / array) into a DREAM.3D 6.x file. The only caller ofreadLegacyArrayis the 3-part case ofImportLegacyDataObjectFromFile(Dream3dIO.cpp:2287). - For a string array, the
nullptrfromCreateWithValuesis ignored (#1908 item L82), so the import fails later with the generic error -69040 "Failed to import DataObject" (Dream3dIO.cpp:2303). - Latent: no code in simplnx calls these functions with a DREAM.3D 6.x file.
- Suggested fix: create the Data Container and the Attribute Matrix first, as the 1-part and 2-part cases do, and pass the Attribute Matrix ID as
parentIdandpreflightas the fourth argument.
- Trigger: call
- M37 · MINOR · ReadDREAM3DFilter (DREAM.3D 6.x import of NeighborLists) · Dream3dIO.cpp:1047 — Legacy import reverses the Attribute Matrix dimensions (line 1592), but a NeighborList keeps the legacy dimension order from
NeighborListIO(NeighborListIO.hpp:72, line 103). For a{2,3,4}grid the matrix is{4,3,2}and the list is{2,3,4}. Normalize the list shape at the legacy boundary only; modern files already store simplnx order. - M38 · MINOR · ReadDREAM3DFilter (DREAM.3D 6.x import of StringArrays) · Dream3dIO.cpp:792 — With preflight off, a cell StringArray is created with shape
{stringCount}, so a multidimensional cell matrix gets a rank-1 string array even when the counts match. Use the owning matrix's shape. Related: #1908 item L82 (count mismatch drops the array) and #1925.
OrientationAnalysis (1 item)
- M34 · MINOR · EBSDSegmentFeaturesFilter · EBSDSegmentFeaturesFilter.cpp:154 — Feature Ids are created in the geometry's Cell Attribute Matrix with the tuple shape of the selected quaternion array. When the quaternions live in another matrix with the same count, Feature Ids do not match the Cell Attribute Matrix shape. Take the shape from the destination matrix. Coordinate with #1941, which changes the destination path.
ImageProcessing (3 items)
-
M29 · MINOR · ReadImageStackFilter · ReadImageStackFilter.cpp:218 — Preflight reads file 0 to get the data type, X and Y dimensions, origin and spacing of the stack (lines 218-253). It does this before it applies the Z crop (line 255), so file 0 is used even when the crop removes it. A crop to files that match each other but differ from file 0 fails in execute: with -64510 for different dimensions (ReadImageStack.cpp:378), or with the generic error -2 for a different data type (#1908 item L62).
-
M30 · MINOR · ReadImageStackFilter · ReadImageFilter.cpp:304 — For
.nrrdand.nhdrfiles, Read Image uses the NRRD backend, which ignores Set Image Data Type (lines 87-88). Read Image Stack uses Read Image for each file. So for a NRRD stack with Set Image Data Type on, the stack keeps the data type of file 0, and a stack with mixed types fails with the generic error -2 (ReadImageStack.cpp:386). The Read Image Stack page says that data type conversion is available for each slice (ReadImageStackFilter.md:9). Only the Read Image page says that the NRRD backend ignores it (ReadImageFilter.md:36). -
M31 · MINOR · MaximumProjectionImageFilter, StandardDeviationProjectionImageFilter and the other projection filters · ImageProcessingFilterUtilities.hpp:787 — With Perform In-Place on, warning -8343 leaves out the selected input by comparing names (
childName == inputArrayName). The input does not have to be in Cell Data. If it is somewhere else and a Cell Data array has the same name, that Cell Data array is deleted with the geometry but is not named in the warning. Compare by object id instead. Found while reviewing PR #1915, which keeps this comparison. -
M39 · MINOR · CAxisSegmentFeaturesFilter · CAxisSegmentFeaturesFilter.cpp:122 — Invalid Misorientation Tolerance defeats feature matching. Fix during this filter's V&V and preserve its documented zero policy. (origin: sweep)
-
M40 · MINOR · BadDataNeighborOrientationCheckFilter · BadDataNeighborOrientationCheckScanline.cpp:43 — Invalid Misorientation Tolerance defeats neighbor agreement in both implementations. Fix during V&V. (origin: sweep)
-
M41 · MINOR · GroupMicroTextureRegionsFilter · GroupMicroTextureRegions.cpp:409 — Invalid c-axis tolerance defeats grouping. Fix during this filter's V&V. (origin: sweep)
-
M42 · MINOR · NeighborOrientationCorrelationFilter · NeighborOrientationCorrelation.cpp:106 — Invalid Misorientation Tolerance defeats orientation-similarity counting. Fix during V&V. (origin: sweep)
-
M43 · MINOR · ReadCtfDataFilter · ReadCtfDataFilter.cpp:131 — Explicit ZCells 0 passes preflight and fails only during execution. Review the failure timing during V&V; preserve the absent-key default of one slice. (origin: sweep) — PR #1967 → combined into #1973
-
M44 · MINOR · GenerateHistogramAtComponent · HistogramUtilities.hpp:185 — The component guard accepts an index equal to the component count, permitting an out-of-bounds read through this utility API. No current caller was found. This is separate from #1945's output-capacity defect. (origin: sweep)
-
M45 · MINOR · nxrunner · nxrunner.cpp:750 — A finite positive cache-memory-budget value can exceed UInt64 after conversion from gigabytes to bytes and reach an undefined conversion. (origin: sweep)
-
M46 · MINOR · CreateDataArrayAdvancedFilter, InitializeDataFilter · InitializeData.cpp:419 — The Fill, Incremental and Ranged Random preflight previews (also
InitializeData.cpp:438,:525,:592) build vectors with one entry per component, andValidateRangeOrderFunctor(InitializeData.hpp:186) converts and compares once per component even when both bounds are single values. A very large but valid component count makes preflight slow or fail to allocate. Build the preview text from the visible values only, and compare scalar range bounds once. -
M47 · MINOR · NeighborOrientationCorrelationFilter ·
NeighborOrientationCorrelationFilter.cpp:185— Preflight reports the geometry Cell Attribute Matrix arrays as modified, but execution changes arrays in the Attribute Matrix that contains Confidence Index, excluding Attribute Arrays to Ignore. Report that same set in preflight. Fix during V&V. origin: https://github.com/BlueQuartzSoftware/simplnx/issues/1867#issuecomment-6370130423. This is separate from item M42, Misorientation Tolerance validation.
Related issues
- #1908 BUG: one-off CRASH, WRONG_DATA and ERROR defects found by the filter sweep. The 15 MINOR items moved here keep a struck-through line there.
- #1899 BUG: documentation and comment defects. The 3 MINOR code items moved here keep a struck-through line there.
- #1916 BUG: StringArray::deepCopy shares the string store with the original.
- #1820 BUG: Feature clustering RDF reference is not normalized to unit mass. It does not cover the last-bin convention of item M09.
- #1879 BUG: C20: Parameters not wired to filter behavior in 22 filters. Its item
ReadImageStackFilter#8covers only the single-page option, not the NRRD data type of item M30. - The tuple-shape items M33 to M38 come from a sweep for the rule that every array has its Attribute Matrix's tuple shape (
docs/Coding_Knowledge_Base.md). Related cases are tracked elsewhere: #1925 (legacy StringArray finalization), #1867 itemMoveDataFilter#2(move into a matrix of another shape) and #1908 item L22 (PartitionGeometry feature matrix size).
Out of scope
- CRASH, WRONG_DATA and ERROR defects. They are in #1908.
- Documentation and comment defects. They are in #1899.
- Defects that follow a pattern shared by several filters. Each pattern has its own systemic issue (#1861 to #1880).
- 主要言語
- C++
- スター
- 18
- フォーク
- 15
- 平均マージ
- 4日 23時間
- マージ済み PR(30日)
- 42
環境構築
- Dockerfile・Docker Compose ファイルなし
- プルリクエストのテンプレートあり
- コントリビューションガイドを読む
はじめの一歩
- issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
- 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
- リポジトリをフォークし、ブランチを切って変更します。
- issue 番号を参照したプルリクエストを送ります。
BlueQuartzSoftware/simplnx のほかの issue
-
bug
難易度 2/5 1〜3時間 初心者へのやさしさ 78/100
BlueQuartzSoftware/simplnx#1987 ·
メンテナーはふだん 6 日以内に返信
-
documentation
難易度 2/5 1〜3時間 初心者へのやさしさ 74/100
BlueQuartzSoftware/simplnx#1980 ·
メンテナーはふだん 6 日以内に返信
-
Testing
難易度 2/5 1〜3時間 初心者へのやさしさ 62/100
BlueQuartzSoftware/simplnx#1979 ·
メンテナーはふだん 6 日以内に返信
-
documentation
難易度 2/5 1〜3時間 初心者へのやさしさ 65/100
BlueQuartzSoftware/simplnx#1978 ·
メンテナーはふだん 6 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 82/100
BlueQuartzSoftware/simplnx#1945 ·
メンテナーはふだん 6 日以内に返信
BlueQuartzSoftware/simplnx の issue をすべて見る
似ている issue
-
bug triage
難易度 2/5 1〜3時間 初心者へのやさしさ 75/100
メンテナーはふだん 1 日以内に返信
-
26.04 bug dark-mode Easy Hack impress symptom: visual
難易度 2/5 1〜3時間 初心者へのやさしさ 68/100
CollaboraOnline/online#16421 · コメント 1 件 ·
-
area/cs bug
難易度 2/5 1〜3時間 初心者へのやさしさ 82/100
ydb-platform/ydb#59881 · コメント 1 件 ·
メンテナーはふだん 1 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 64/100
メンテナーはふだん 1 日以内に返信
-
documentation enhancement lua server
難易度 2/5 1〜3時間 初心者へのやさしさ 66/100