Hacktoberfest 2026: le issue che i maintainer hanno segnato per ottobre, aperte e adatte ai principianti. Sfoglia le issue Hacktoberfest

humility 0.13.0.699 failed to write cosmo-os QSPI on alfred

Aperta
  • Qualcosa non va?
#705 12 commenti 0 reazioni 0 assegnatari Vedi su GitHub

Nessuno ha ancora preso questa issue.

Valutazione

Difficoltà
4/5
Tempo stimato
3-5 giorni
Idoneità per principianti
48/100
Tipo di issue
Bug
Chiarezza
Abbastanza chiara
Stato di attività
Tranquilla
Stack tecnologico
rust
Ambito
devtools, embedded-iot

Direzione di ricerca

Inizia dal percorso del comando qspi e dalla relativa gestione dei trasferimenti CMSIS-DAP/probe-rs, usando la riproduzione fornita h qspi -D ... su cosmo-os. Confronta humility 0.13.0.699 con il binario 0.13.0 funzionante come baseline. Il lavoro è completato quando la versione attuale riesce a scrivere ripetutamente l’immagine senza errori di trasferimento o timeout USB.

Scritto dal modello di indicizzazione a partire dal testo della issue.

Descrizione

I was trying to write a new host phase1 to flash on cosmo-os from alfred, and three attempts in a row failed with
variants of this.

alfred(cosmo-os)% h qspi -D /staff/andy/os/cosmo.rom && cycle
humility: attached to 1fc9:0143:WTECYVHYHSQD4 via CMSIS-DAP V1
humility: Using existing slot settings
2026-06-23T16:47:17.459592Z ERROR probe_rs::probe::cmsisdap::commands::transfer: Transfer count larger than requested number of transfers
2026-06-23T16:47:17.459834Z  WARN probe_rs::session: Could not clear all hardware breakpoints: An ARM specific error occurred.

Caused by:
    0: The debug probe encountered an error.
    1: An error which is specific to the debug probe in use occurred.
    2: Error handling CMSIS-DAP command Transfer.
    3: Unexpected answer to command.
2026-06-23T16:47:17.461481Z  WARN probe_rs::probe::cmsisdap: CMSIS_DAP: Only 1/2 transfers were executed, but no error was reported.
2026-06-23T16:47:17.461579Z  WARN probe_rs::session: Failed to deconfigure device during shutdown: Arm(Other("Possible error in CMSIS-DAP probe: Only 1/2 transfers were executed, but no error was reported."))
2026-06-23T16:47:17.461974Z  WARN probe_rs::probe::cmsisdap: CMSIS_DAP: Only 2/3 transfers were executed, but no error was reported.
humility qspi failed: An ARM specific error occurred.

Caused by:
    0: The debug probe encountered an error.
    1: An error which is specific to the debug probe in use occurred.
    2: Error handling CMSIS-DAP command Transfer.
    3: Timeout in USB communication.

alfred(cosmo-os)% h qspi -D /staff/andy/os/cosmo.rom && cycle
humility: attached to 1fc9:0143:WTECYVHYHSQD4 via CMSIS-DAP V1
humility: Using existing slot settings
humility: skipping sector 0
humility: erased 9.88 MiB in 12 seconds
2026-06-23T16:59:29.475567Z  WARN probe_rs::session: Could not clear all hardware breakpoints: An ARM specific error occurred.

Caused by:
    0: The debug probe encountered an error.
    1: An error which is specific to the debug probe in use occurred.
    2: Error handling CMSIS-DAP command Transfer.
    3: Timeout in USB communication.
2026-06-23T16:59:29.526139Z  WARN probe_rs::session: Failed to deconfigure device during shutdown: Arm(Probe(ProbeSpecific(BoxedProbeError(Send { command_id: Transfer, source: Timeout }))))
humility qspi failed: An ARM specific error occurred.

Caused by:
    0: Error using access port FullyQualifiedApAddress { dp: Default, ap: V1(0) }.
    1: Failed to read register DRW at address 0xd0c
    2: The debug probe encountered an error.
    3: An error which is specific to the debug probe in use occurred.
    4: Error handling CMSIS-DAP command Transfer.
    5: Timeout in USB communication.
alfred(cosmo-os)%

I then grabbed the humility binary from igor which just reports as 0.13.0 and that succeeded first time:

alfred(cosmo-os)% pfexec ./humility qspi -D /staff/andy/os/cosmo.rom
humility: attached to 1fc9:0143:WTECYVHYHSQD4 via CMSIS-DAP V1
humility: Using existing slot settings
humility: skipping sector 0
humility: erased 3.19 MiB in 3 seconds
humility: hashed 32.00 MiB, wrote 3.19 MiB in 6 minutes
Lingua principale
Rust
Stelle
587
Fork
64
Merge medio
2g 15h
PR unite (30g)
5

Preparare l'ambiente

Questo progetto non fornisce container di sviluppo, Dockerfile né guida per i contributori, quindi l'ambiente è a tuo carico: parti dal suo README e consulta la nostra guida al primo contributo per i passaggi generali.

Come iniziare

  1. Leggi tutta la issue e poi la guida ai contributi del progetto.
  2. Commenta sulla issue per dire che te ne occupi tu — evita che due persone facciano lo stesso lavoro.
  3. Fai un fork del repository e lavora su un branch.
  4. Apri una pull request che faccia riferimento al numero della issue.

Altre issue di oxidecomputer/humility

Tutte le issue di oxidecomputer/humility

Issue simili

Altre issue su Rust

Ricevi le nuove issue nella tua casella

Un breve riepilogo di issue GitHub adatte ai principianti.