'eprosima::fastcdr::exception::NotEnoughMemoryException' what(): Not enough memory in the buffer stream error

Iniziare riproducendo il problema di micro-ROS-agent negli scenari di rete descritti Ubuntu 22.04/ROS 2 Humble e Ubuntu 24.04/ROS 2 Jazzy, inclusi i casi relativi ai comandi SSH e ROS 2. Determinare se versioni miste di ROS 2 attivano l’eccezione Fast CDR, quindi documentare la causa principale, i requisiti di compatibilità e una risoluzione verificata.

Hello?

Ubuntu version : 22.04
ROS2 version : Humble

When running micro-ros-agent, the following error occurs:

terminate called after throwing an instance of 'eprosima::fastcdr::exception::NotEnoughMemoryException' what(): Not enough memory in the buffer stream

Let me explain some situations when that error occurs.

1. When running micro-ROS-agent on a Linux PC with Ubuntu22.04, ROS2 Humble installed, this device and another device are connected to the same network as a Linux PC with Ubuntu24.04, ROS Jazzy installed.

2. When running micro-ROS-agent on a Linux PC with Ubuntu22.04, ROS2 Humble installed, when connecting to the same network as this device and another device with a Linux PC with Ubuntu24.04, ROS Jazzy installed and running ROS2 Node via SSH.

3. When running micro-ROS-agent on a Linux PC with Ubuntu22.04, ROS2 Humble installed, when connecting to the same network as this device and another device with a Linux PC with Ubuntu24.04, ROS Jazzy installed, and entering ROS2 commands such as the ros2 topic list command and the ros2 topic echo /topic1 command via SSH.

This situation has occurred quite frequently, and my question is as follows:

1. Do you know how to fix the following error?

terminate called after throwing an instance of 'eprosima::fastcdr::exception::NotEnoughMemoryException' what(): Not enough memory in the buffer stream

2. Can that error occur simply because devices with different ROS2 versions (Humble, Jazzy) are connected to the same network?

3. When devices with different ROS2 versions (Humble, Jazzy) are connected to the same network, can an error occur simply by entering the command to connect via SSH?

4. When devices with different ROS2 versions (Humble, Jazzy) are connected to the same network, can the error occur when entering ROS2 commands or running ROS2 nodes?

If you know any of the questions I'm asking above, please help me.

Thank you.