Corsair HX1500i PSU reports: WARNING: some attributes cannot be read from corsair-psu kernel driver

Aperta

#826 aperta il 29/9/2025 4 commenti 0 reazioni 0 assegnatari Vedi su GitHub

Nessuno ha ancora preso questa issue.

Valutazione

Difficoltà: 3/5
Tempo stimato: 1-2 giorni
Idoneità per principianti: 35/100

Tipo di issue: Bug
Chiarezza: Da chiarire
Stato di attività: Ferma
Stack tecnologico: linux, python
Ambito: cli, operating-systems

Direzione di ricerca

Start with the CorsairHidPsu get_status and _get_status_from_hwmon entry points, then reproduce the report with liquidctl status --debug --match corsair. Compare the attributes read through the corsair-psu hwmon interface with the warning and determine the expected handling for the HX1500i. Done means the device status is handled consistently without the reported warning, with coverage for the observed behavior if existing tests support it.

Scritto dal modello di indicizzazione a partire dal testo della issue.

Descrizione

bug

Describe the bug

Corsair HX1500i PSU reports: WARNING: some attributes cannot be read from corsair-psu kernel driver

The message shows up when liquidctl is run.

lsusb output:


Bus 003 Device 005: ID 1b1c:1c1f Corsair HX1500i Power Supply
Negotiated speed: Full Speed (12Mbps)
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 [unknown]
  bDeviceSubClass         0 [unknown]
  bDeviceProtocol         0 
  bMaxPacketSize0         8
  idVendor           0x1b1c Corsair
  idProduct          0x1c1f HX1500i Power Supply
  bcdDevice            1.00
  iManufacturer           1 CORSAIR
  iProduct                2 HX1500i Power Supply
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0029
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xc0
      Self Powered
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         3 Human Interface Device
      bInterfaceSubClass      0 [unknown]
      bInterfaceProtocol      0 
      iInterface              0 
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.11
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 (null)
          wDescriptorLength      29
          Report Descriptors: 
            ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               1
Device Status:     0x0001
  Self Powered

Commands executed

liquidctl status --debug --match corsair

Output of all relevant commands with `--debug` flag

[DEBUG] (cli) (_log_env_infos): script: /usr/sbin/liquidctl
[DEBUG] (cli) (_log_env_infos): version: 1.15.0
[DEBUG] (cli) (_log_env_infos): platform: Linux-6.16.7-200.fc42.x86_64-x86_64-with-glibc2.41
[DEBUG] (cli) (_log_env_infos): python: 3.13.7 (main, Aug 14 2025, 00:00:00) [GCC 15.2.1 20250808 (Red Hat 15.2.1-1)]
[DEBUG] (cli) (_log_env_infos): encoding: UTF-8 current, UTF-8 preferred, utf8_mode 0
[DEBUG] (cli) (_log_env_infos): with colorlog: 6.9.0
[DEBUG] (cli) (_log_env_infos): with crcmod: 1.7
[DEBUG] (cli) (_log_env_infos): with docopt: 0.6.2
[DEBUG] (cli) (_log_env_infos): with hidapi: 0.14.0.post3
[DEBUG] (cli) (_log_env_infos): with pyusb: 1.3.1
[DEBUG] (cli) (_log_env_infos): with pillow: 11.1.0
[DEBUG] (cli) (_log_env_infos): with smbus: 1.1
[DEBUG] (cli) (_log_env_infos): with winusbcdc: version n/a (No package metadata was found for winusbcdc)
[DEBUG] (cli) (_log_env_infos): with libusb-package: version n/a (No package metadata was found for libusb-package)
[DEBUG] (smbus) (find_devices): searching LinuxI2c
[DEBUG] (smbus) (find_devices): LinuxI2c drivers: Ddr4Temperature, EvgaPascal, RogTuring, VengeanceRgb
[DEBUG] (smbus) (find_devices): I²C adapter: i2c-3 (AMDGPU DM i2c hw bus 0)
[DEBUG] (smbus) (find_devices): I²C adapter: 16-0051 skipped: not a bus or unsupported adapter
[DEBUG] (smbus) (find_devices): I²C adapter: i2c-10 (AMDGPU DM aux hw bus 2)
[DEBUG] (smbus) (find_devices): I²C adapter: i2c-1 (AMDGPU SMU 0)
[DEBUG] (smbus) (find_devices): I²C adapter: i2c-17 (SMBus PIIX4 adapter port 2 at 0b00)
[DEBUG] (smbus) (find_devices): I²C adapter: i2c-8 (AMDGPU DM aux hw bus 0)
[DEBUG] (smbus) (find_devices): I²C adapter: i2c-15 (AMDGPU DM aux hw bus 2)
[DEBUG] (smbus) (find_devices): I²C adapter: i2c-6 (AMDGPU DM i2c hw bus 3)
[DEBUG] (smbus) (find_devices): I²C adapter: i2c-MSFT8000:01 skipped: invalid literal for int() with base 10: 'MSFT8000:01'
[DEBUG] (smbus) (find_devices): I²C adapter: i2c-13 (AMDGPU DM i2c hw bus 2)
[DEBUG] (smbus) (find_devices): I²C adapter: i2c-4 (AMDGPU DM i2c hw bus 1)
[DEBUG] (smbus) (find_devices): I²C adapter: i2c-ITE8853:00 skipped: invalid literal for int() with base 10: 'ITE8853:00'
[DEBUG] (smbus) (find_devices): I²C adapter: 16-0052 skipped: not a bus or unsupported adapter
[DEBUG] (smbus) (find_devices): I²C adapter: i2c-11 (AMDGPU DM i2c hw bus 0)
[DEBUG] (smbus) (find_devices): I²C adapter: i2c-2 (AMDGPU SMU 1)
[DEBUG] (smbus) (find_devices): I²C adapter: 16-0050 skipped: not a bus or unsupported adapter
[DEBUG] (smbus) (find_devices): I²C adapter: i2c-0 (Synopsys DesignWare I2C adapter)
[DEBUG] (smbus) (find_devices): I²C adapter: i2c-18 (SMBus PIIX4 adapter port 1 at 0b20)
[DEBUG] (smbus) (find_devices): I²C adapter: i2c-9 (AMDGPU DM aux hw bus 1)
[DEBUG] (smbus) (find_devices): I²C adapter: i2c-16 (SMBus PIIX4 adapter port 0 at 0b00)
[DEBUG] (smbus) (find_devices): I²C adapter: i2c-7 (AMDGPU DM i2c OEM bus)
[DEBUG] (smbus) (find_devices): I²C adapter: i2c-14 (AMDGPU DM aux hw bus 1)
[DEBUG] (smbus) (find_devices): I²C adapter: i2c-5 (AMDGPU DM i2c hw bus 2)
[DEBUG] (smbus) (find_devices): I²C adapter: i2c-ITE8853:01 skipped: invalid literal for int() with base 10: 'ITE8853:01'
[DEBUG] (smbus) (find_devices): I²C adapter: 16-0053 skipped: not a bus or unsupported adapter
[DEBUG] (smbus) (find_devices): I²C adapter: i2c-12 (AMDGPU DM i2c hw bus 1)
[DEBUG] (usb) (find_devices): searching HidapiBus
[DEBUG] (usb) (find_devices): HidapiBus drivers: Aquacomputer, AsusRyujin, AuraLed, CommanderCore, CommanderPro, Coolit, CorsairHidPsu, H1V2, HydroPlatinum, Kraken2, KrakenX3, KrakenZ3, MpgCooler, NzxtEPsu, RgbFusion2, SmartDevice, SmartDevice2, _BaseSmartDevice
[DEBUG] (usb) (find_devices): HID device: 0b05:1b7c (usage_page=0xffc0 usage=0x0001)
[DEBUG] (usb) (find_devices): HID device: 1050:0407 (usage_page=0x0001 usage=0x0006)
[DEBUG] (usb) (find_devices): HID device: 1050:0407 (usage_page=0xf1d0 usage=0x0001)
[DEBUG] (usb) (find_devices): HID device: 046d:101a (usage_page=0x0001 usage=0x0002)
[DEBUG] (usb) (find_devices): HID device: 046d:101a (usage_page=0xff00 usage=0x0001)
[DEBUG] (usb) (find_devices): HID device: 046d:101a (usage_page=0xff00 usage=0x0002)
[DEBUG] (usb) (find_devices): HID device: 046d:101a (usage_page=0xff00 usage=0x0004)
[DEBUG] (usb) (find_devices): HID device: 046d:2008 (usage_page=0x0001 usage=0x0006)
[DEBUG] (usb) (find_devices): HID device: 046d:2008 (usage_page=0x000c usage=0x0001)
[DEBUG] (usb) (find_devices): HID device: 046d:2008 (usage_page=0x0001 usage=0x0080)
[DEBUG] (usb) (find_devices): HID device: 046d:2008 (usage_page=0xffbc usage=0x0088)
[DEBUG] (usb) (find_devices): HID device: 046d:2008 (usage_page=0xff00 usage=0x0001)
[DEBUG] (usb) (find_devices): HID device: 046d:2008 (usage_page=0xff00 usage=0x0002)
[DEBUG] (usb) (find_devices): HID device: 046d:2008 (usage_page=0xff00 usage=0x0004)
[DEBUG] (usb) (find_devices): HID device: 046d:c52b (usage_page=0xff00 usage=0x0001)
[DEBUG] (usb) (find_devices): HID device: 046d:c52b (usage_page=0xff00 usage=0x0002)
[DEBUG] (usb) (find_devices): HID device: 046d:c52b (usage_page=0xff00 usage=0x0004)
[DEBUG] (usb) (find_devices): HID device: 05ac:024f (usage_page=0x0001 usage=0x0006)
[DEBUG] (usb) (find_devices): HID device: 05ac:024f (usage_page=0x000c usage=0x0001)
[DEBUG] (usb) (find_devices): HID device: 05ac:024f (usage_page=0x0001 usage=0x0080)
[DEBUG] (usb) (find_devices): HID device: 05ac:024f (usage_page=0x0001 usage=0x0006)
[DEBUG] (usb) (find_devices): HID device: 05ac:024f (usage_page=0x0001 usage=0x0002)
[DEBUG] (usb) (find_devices): HID device: 05ac:024f (usage_page=0xffff usage=0x0001)
[DEBUG] (usb) (find_devices): HID device: 0b05:1aa6 (usage_page=0xff72 usage=0x00a1)
[DEBUG] (usb) (find_devices): HID device: 051d:0002 (usage_page=0x0084 usage=0x0004)
[DEBUG] (usb) (find_devices): HID device: 1e71:3014 (usage_page=0xff00 usage=0x0001)
[DEBUG] (usb) (find_devices): HID device: 1b1c:1c1f (usage_page=0xff00 usage=0x0001)
[DEBUG] (usb) (__init__): has kernel driver: corsair-psu (/sys/class/hidraw/hidraw2/device/hwmon/hwmon14)
[DEBUG] (usb) (probe): CorsairHidPsu identified: Corsair HX1500i
[DEBUG] (usb) (find_devices): searching PyUsbBus
[DEBUG] (usb) (find_devices): PyUsbBus drivers: Hydro690Lc, HydroPro, Legacy690Lc, Modern690Lc, _Base690Lc, _ModernBase690Lc
[DEBUG] (usb) (find_devices): USB device: 1d6b:0003
[DEBUG] (usb) (find_devices): USB device: 1d6b:0002
[DEBUG] (usb) (find_devices): USB device: 1d6b:0002
[DEBUG] (usb) (find_devices): USB device: 1d6b:0003
[DEBUG] (usb) (find_devices): USB device: 1d6b:0003
[DEBUG] (usb) (find_devices): USB device: 1d6b:0002
[DEBUG] (usb) (find_devices): USB device: 1d6b:0003
[DEBUG] (usb) (find_devices): USB device: 1d6b:0002
[DEBUG] (usb) (find_devices): USB device: 174c:3074
[DEBUG] (usb) (find_devices): USB device: 1d6b:0003
[DEBUG] (usb) (find_devices): USB device: 1b1c:1c1f
[DEBUG] (usb) (find_devices): USB device: 1e71:3014
[DEBUG] (usb) (find_devices): USB device: 174c:2074
[DEBUG] (usb) (find_devices): USB device: 051d:0002
[DEBUG] (usb) (find_devices): USB device: 0b05:1aa6
[DEBUG] (usb) (find_devices): USB device: 1d6b:0002
[DEBUG] (usb) (find_devices): USB device: 2109:0813
[DEBUG] (usb) (find_devices): USB device: 2109:0813
[DEBUG] (usb) (find_devices): USB device: 1d6b:0003
[DEBUG] (usb) (find_devices): USB device: 0489:e13a
[DEBUG] (usb) (find_devices): USB device: 04c5:11a2
[DEBUG] (usb) (find_devices): USB device: 10c4:ea60
[DEBUG] (usb) (find_devices): USB device: 1a86:55d4
[DEBUG] (usb) (find_devices): USB device: 05e3:0608
[DEBUG] (usb) (find_devices): USB device: 05ac:024f
[DEBUG] (usb) (find_devices): USB device: 046d:082d
[DEBUG] (usb) (find_devices): USB device: 046d:c52b
[DEBUG] (usb) (find_devices): USB device: 1050:0407
[DEBUG] (usb) (find_devices): USB device: 0a12:0001
[DEBUG] (usb) (find_devices): USB device: 2109:2813
[DEBUG] (usb) (find_devices): USB device: 2109:2813
[DEBUG] (usb) (find_devices): USB device: 0b05:1b7c
[DEBUG] (usb) (find_devices): USB device: 1d6b:0002
[DEBUG] (cli) (main): device: Corsair HX1500i
[INFO] (corsair_hid_psu) (get_status): bound to corsair-psu kernel driver, reading status from hwmon
[WARNING] (corsair_hid_psu) (_get_status_from_hwmon): some attributes cannot be read from corsair-psu kernel driver
[DEBUG] (hwmon) (get_string): read in0_input: 115000
[DEBUG] (hwmon) (get_string): read temp1_input: 52000
[DEBUG] (hwmon) (get_string): read temp2_input: 56250
[DEBUG] (hwmon) (get_string): read fan1_input: 0
[DEBUG] (hwmon) (get_string): read in1_input: 11890
[DEBUG] (hwmon) (get_string): read curr2_input: 11250
[DEBUG] (hwmon) (get_string): read power2_input: 136000000
[DEBUG] (hwmon) (get_string): read in2_input: 5015
[DEBUG] (hwmon) (get_string): read curr3_input: 5062
[DEBUG] (hwmon) (get_string): read power3_input: 25000000
[DEBUG] (hwmon) (get_string): read in3_input: 3312
[DEBUG] (hwmon) (get_string): read curr4_input: 1000
[DEBUG] (hwmon) (get_string): read power4_input: 3000000
[DEBUG] (hwmon) (get_string): read power1_input: 178000000
[DEBUG] (corsair_hid_psu) (_input_power_at): input power estimates: 200.303 W @ 115 V; 199.295 W @ 230 V
Corsair HX1500i
├── VRM temperature            52.0  °C
├── Case temperature           56.2  °C
├── Fan speed                     0  rpm
├── Input voltage            115.00  V
├── +12V output voltage       11.89  V
├── +12V output current       11.25  A
├── +12V output power        136.00  W
├── +5V output voltage         5.01  V
├── +5V output current         5.06  A
├── +5V output power          25.00  W
├── +3.3V output voltage       3.31  V
├── +3.3V output current       1.00  A
├── +3.3V output power         3.00  W
├── Total power output       178.00  W
├── Estimated input power    200.00  W
└── Estimated efficiency         89  %

Affected device

Corsair HX1500i

Does your version of liquidctl support the device in question?

Yes, my version supports it

Operating system and version

Fedora Linux 42

Installation method

Official

Version of liquidctl

liquidctl v1.15.0 (Linux-6.16.7-200.fc42.x86_64-x86_64-with-glibc2.41)

Lingua principale: Python
Stelle: 2.7k
Fork: 297
Metriche di merge delle PR: Nessuna PR unita negli ultimi 30g

Preparare l'ambiente

Nessun Dockerfile né file Docker Compose
Ha un modello di pull request
Leggi la guida per i contributori

Come iniziare

Leggi tutta la issue e poi la guida ai contributi del progetto.
Commenta sulla issue per dire che te ne occupi tu — evita che due persone facciano lo stesso lavoro.
Fai un fork del repository e lavora su un branch.
Apri una pull request che faccia riferimento al numero della issue.

Altre issue di liquidctl/liquidctl

asus_ryujin: on Ryujin III, the first `set pump-fan` leaves the pump at maximum until `set pump` is given a different value
Aperta
- Qualcosa non va?
Difficoltà 1/5 Meno di un'ora Idoneità per principianti 90/100

liquidctl/liquidctl#923 · 1 commento · Aperta il 3/9/2026
find_liquidctl_devices() crashes with ValueError when a device without string descriptors is on the bus (e.g. NZXT bootloader 1e71:3011)
Forse già presa @c-tonneslan l’ha presa 93 giorni fa. Aperta
- Qualcosa non va?
bug

Difficoltà 2/5 1-3 ore Idoneità per principianti 75/100

liquidctl/liquidctl#907 · Aperta il 5/7/2026
MSI driver broken on hidapi 0.15.0 due to differently reported usage pages
Aperta
- Qualcosa non va?
bug

Difficoltà 4/5 3-5 giorni Idoneità per principianti 48/100

liquidctl/liquidctl#931 · Aperta il 26/9/2026
Kraken 2023 Elite: set lcd screen orientation applies a consistent +90 degree offset from the requested value
Aperta
- Qualcosa non va?
Difficoltà 4/5 3-5 giorni Idoneità per principianti 45/100

liquidctl/liquidctl#925 · Aperta il 9/9/2026
Aquacomputer D5 Next / High Flow Next RGB protocol documented (reference for lighting support)
Aperta
- Qualcosa non va?
Difficoltà 4/5 3-5 giorni Idoneità per principianti 45/100

liquidctl/liquidctl#922 · Aperta il 30/8/2026

Tutte le issue di liquidctl/liquidctl

Issue simili

Desktop tutorial: loop the Finish and Delete illustrations
Aperta
- Qualcosa non va?
area: desktop area: website priority: P2 type: feature

Difficoltà 2/5 1-3 ore Idoneità per principianti 62/100

appandflow/stim#3411 · 1 commento · Aperta il 10/10/2026

I maintainer di solito rispondono entro 1 giorno
stats_summary does not work properly with only spatial dims
Aperta
- Qualcosa non va?
bug

Difficoltà 2/5 Meno di un'ora Idoneità per principianti 88/100

baptistehamon/lsapy#185 · Aperta il 10/10/2026

I maintainer di solito rispondono entro 1 giorno
NM Child Income Tax Credit: $75,001 bracket start gives $212 instead of $106
Aperta
- Qualcosa non va?
Difficoltà 2/5 1-3 ore Idoneità per principianti 82/100

PolicyEngine/policyengine-us#10073 · Aperta il 10/10/2026

I maintainer di solito rispondono entro 2 giorni
FIX: azimuthal_shear does not mask Level II raw velocity codes
Aperta
- Qualcosa non va?
Difficoltà 2/5 1-3 ore Idoneità per principianti 72/100

syedhamidali/radarx#277 · Aperta il 10/10/2026

I maintainer di solito rispondono entro 1 giorno
[TC-M09-74-G140][RF-24] JSON null impide persistir calibraciones VISION NO_CONVERGIDA
Aperta
- Qualcosa non va?
bug

Difficoltà 2/5 1-3 ore Idoneità per principianti 68/100

Arekkazu/sgpmp-backend#549 · Aperta il 10/10/2026

I maintainer di solito rispondono entro 1 giorno

Altre issue su Python

Corsair HX1500i PSU reports: WARNING: some attributes cannot be read from corsair-psu kernel driver

Qualcosa non va?

Valutazione

Direzione di ricerca

Descrizione

Describe the bug

Commands executed

Output of all relevant commands with --debug flag

Affected device

Does your version of liquidctl support the device in question?

Operating system and version

Installation method

Version of liquidctl

Preparare l'ambiente

Come iniziare

Altre issue di liquidctl/liquidctl

Qualcosa non va?

Qualcosa non va?

Qualcosa non va?

Qualcosa non va?

Qualcosa non va?

Issue simili

Qualcosa non va?

Qualcosa non va?

Qualcosa non va?

Qualcosa non va?

Qualcosa non va?

Ricevi le nuove issue nella tua casella

Output of all relevant commands with `--debug` flag