microcode required for Intel 1280P 6-9a-00

Inizia esaminando la firma della CPU, la revisione attuale del microcode e l'output delle vulnerabilità nell'issue, quindi confrontali con le voci di microcode Intel disponibili nel repository. Riproduci il report con lscpu e dmesg sull'immagine Proxmox e verifica se la firma Intel 1280P è supportata. L'attività è completata quando il microcode appropriato è disponibile e la condizione di microcode mancante segnalata è stata risolta.

Good afternoon, I am using the Proxmox image and as part of the updates I do not receive microcode for correct operation with the Intel I7 1280P processor, microcode is required for Intel 1280P 6-9a-00

Without microcode, I can’t correctly activate the virtualization and SR-IOV functions

root@server:/etc/modprobe.d# lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Address sizes: 46 bits physical, 48 bits virtual
Byte Order: Little Endian
CPU(s): 20
On-line CPU(s) list: 0-19
Vendor ID: GenuineIntel
BIOS Vendor ID: Intel(R) Corporation
Model name: Genuine Intel(R) 0000
BIOS Model name: Genuine Intel(R) 0000 To Be Filled By O.E.M. CPU @ 3.4GHz
BIOS CPU family: 1
CPU family: 6
Model: 154
Thread(s) per core: 2
Core(s) per socket: 14
Socket(s): 1
Stepping: 0
CPU(s) scaling MHz: 54%
CPU max MHz: 4500.0000
CPU min MHz: 400.0000
BogoMIPS: 1996.80
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx
pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf tsc_known_freq pni pc
lmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_tim
er aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb cat_l2 cdp_l2 ssbd ibrs ibpb stibp ibrs_enhanced tpr_shadow
flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid rdt_a rdseed adx smap clflushopt clwb intel_pt sh
a_ni xsaveopt xsavec xgetbv1 xsaves split_lock_detect user_shstk avx_vnni dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp
epp hwp_pkg_req hfi vnmi umip pku ospke waitpkg gfni vaes vpclmulqdq tme rdpid bus_lock_detect cldemote movdiri movdir64b fsrm md
clear serialize pconfig arch_lbr ibt flush_l1d arch_capabilities
Virtualization features:
Virtualization: VT-x
Caches (sum of all):
L1d: 544 KiB (14 instances)
L1i: 704 KiB (14 instances)
L2: 11.5 MiB (8 instances)
L3: 24 MiB (1 instance)
NUMA:
NUMA node(s): 1
NUMA node0 CPU(s): 0-19
Vulnerabilities:
Gather data sampling: Not affected
Itlb multihit: Not affected
L1tf: Not affected
Mds: Not affected
Meltdown: Not affected
Mmio stale data: Not affected
Reg file data sampling: Vulnerable: No microcode
Retbleed: Not affected
Spec rstack overflow: Not affected
Spec store bypass: Mitigation; Speculative Store Bypass disabled via prctl
Spectre v1: Mitigation; usercopy/swapgs barriers and __user pointer sanitization
Spectre v2: Mitigation; Enhanced / Automatic IBRS; IBPB conditional; RSB filling; PBRSB-eIBRS SW sequence; BHI SW loop, KVM SW loop
Srbds: Not affected
Tsx async abort: Not affected

root@server:/etc/modprobe.d# dmesg | grep microcode
[ 0.168576] Register File Data Sampling: Vulnerable: No microcode
[ 0.841605] microcode: Current revision: 0x0000001c

The system often reboots without recording errors in the log, and when I try to activate and use SR-IOV I get errors
[ 12.425294] i915 0000:00:10.0: [drm] ERROR GT0: GUC: mmio request 0x4100: failure 201/0
[ 12.425300] i915 0000:00:10.0: [drm] ERROR GT0: Failed to retrieve hwconfig table: -ENOENT