Hacktoberfest 2026: le issue che i maintainer hanno segnato per ottobre, aperte e adatte ai principianti. Sfoglia le issue Hacktoberfest

ICOM 2730a > Hamlib -> Gpredict , Can't get it to change frequency based on doppler shifts. But I can manually change the Downlink frequency.

Aperta
  • Qualcosa non va?
#354 4 commenti 0 reazioni 0 assegnatari Vedi su GitHub

Nessuno ha ancora preso questa issue.

Valutazione

Difficoltà
4/5
Tempo stimato
3-5 giorni
Idoneità per principianti
15/100
Tipo di issue
Bug
Chiarezza
Da chiarire
Stato di attività
Ferma
Stack tecnologico
c
Ambito
cli

Direzione di ricerca

The log shows rigctld failing on the IC-2730 at startup: the icom_get_freq call sends command 0x25 and gets back a 0xFA reply, so icom_one_transaction returns -9 in frame.c. Start from that log segment and the icom backend's frequency-set path, then check whether the radio accepts set-frequency commands over COM1 at 19200 baud. Done would mean GPredict's Doppler-corrected frequency reaches the radio through rigctld. This needs radio and Hamlib protocol knowledge, and the thread has been idle for over two years.

Scritto dal modello di indicizzazione a partire dal testo della issue.

Descrizione

I am running a .bat : rigctld -vvvvv -m 3072 -r COM1

It's not working with adjusting the frequency as GPredict makes doppler shift adjustments. If I change the radio control Downlink frequency it gets sent and changes radio, but if I choose to Track then the doppler frequency is not changing on radio.

Can you identify any issue or suggest a better .bat command that may assist in getting the frequency to consistently change with what GPredict is changing the frequency to?

In GPRedict I have Host localhost, Port 4532, Radio type I've tried all choices, PTT Status I've tried all settings, also VFO Up/Down same thing. No matter what I do with settings I can't resolve the issue.

Screenshot 2024-06-13 111712

LOG SEGMENT

C:\Users\garmi\OneDrive\Desktop\AntRunner-master\software\hamlib-w64-4.5git\bin>rigctld -vvvvv -m 3072 -r COM1
rigctld.c(626) Startup: rigctld -vvvvv -m 3072 -r COM1
rigctld Hamlib 4.5git Tue May 17 22:03:48 2022 +0000 SHA=468dd1
Report bugs to [email protected]

Max# of rigctld client services=32
rig_check_rig_caps: p1=000000005C104E60, p2=000000005C10B3D8, rig_model=000000005C104E60, macro_name=000000005C10B3D8
initrigs4_icom: _init called
rig_init(496): 0000000000F2AFFC rs->comm_state==0?=0
rig_init: rig has VFO_SUB
rig_init: rig has VFO_MAIN
1:icom.c(613):icom_init entered
icom_init: done
1:icom.c(695):icom_init returning(0)
main: twiddle=0, uplink=0, twiddle_rit=0
1:rig.c(743):rig_open entered
rig_open: cwd=C:\Users\garmi\OneDrive\Desktop\AntRunner-master\software\hamlib-w64-4.5git\bin
rig_open: C:\Users\garmi\OneDrive\Desktop\AntRunner-master\software\hamlib-w64-4.5git\bin/.hamlib_settings does not exist
serial_open: COM1
serial_setup: tcgetattr
serial_setup: cfsetispeed=19200,0x000e
serial_setup: cfsetospeed=19200,0x000e
serial_setup: data_bits=8
serial_setup: parity=0
serial_setup: Handshake=None
serial_setup: tcsetattr TCSANOW
read_string_generic called, rxmax=4095 direct=1
2:rig.c(7055):async_data_handler_start entered
async_data_handler_start: async data support disabled
2:rig.c(7060):async_data_handler_start returning(0)
rig.c(241):add_opened_rig returning2(0)
rig_open: 0000000000F2AFFC rs->comm_state==1?=1
2:icom.c(944):icom_rig_open entered
icom_rig_open: IC-2730 v20220326.0
3:icom.c(748):icom_get_usb_echo_off entered
4:frame.c(425):icom_transaction entered
icom_transaction: cmd=0x03, subcmd=0xffffffff, payload_len=0
5:frame.c(138):icom_one_transaction entered
rig_flush: called for serial device
read_string_generic called, rxmax=4095 direct=1
write_block(): TX 6 bytes, method=2
0000 fe fe 90 e0 03 fd ......
read_string_generic called, rxmax=200 direct=1
read_string_generic: minlen now 6
read_string_generic(): RX 6 characters, direct=1
0000 fe fe 90 e0 03 fd ......
icom_one_transaction: frm_len=6, frm_len-1=fd, frm_len-2=03
5:frame.c(403):icom_one_transaction returning(0)
4:frame.c(455):icom_transaction returning(0)
icom_get_usb_echo_off: ack_len=1
read_string_generic called, rxmax=200 direct=1
read_string_generic: minlen now 11
read_string_generic(): RX 11 characters, direct=1
0000 fe fe e0 90 03 00 00 62 45 01 fd .......bE..
icom_get_usb_echo_off: USB echo on detected, get freq retval=11
3:icom.c(777):icom_get_usb_echo_off returning(0)
icom_rig_open: echo status result=0
icom_rig_open: echo status known, getting frequency
rig_get_freq(1837) called vfo=currVFO
vfo_fixup:(from rig_get_freq:1843) vfo=currVFO, vfo_curr=None, split=0
vfo_fixup: Leaving currVFO alone
rig.c(1846) vfo=currVFO, curr_vfo=None
rig_get_freq: cache miss age=1000000ms, cached_vfo=None, asked_vfo=None
rig_get_freq(1928): vfo_opt=0, model=3072
icom_get_freq called for None, curr_vfo=None
icom_get_freq: using vfo=None
3:frame.c(425):icom_transaction entered
icom_transaction: cmd=0x25, subcmd=0x00, payload_len=0
4:frame.c(138):icom_one_transaction entered
rig_flush: called for serial device
read_string_generic called, rxmax=4095 direct=1
write_block(): TX 7 bytes, method=2
0000 fe fe 90 e0 25 00 fd ....%..
read_string_generic called, rxmax=200 direct=1
read_string_generic: minlen now 7
read_string_generic(): RX 7 characters, direct=1
0000 fe fe 90 e0 25 00 fd ....%..
icom_one_transaction: DEBUG retval=7, frm_len=7, cmd=0x25
read_string_generic called, rxmax=200 direct=1
read_string_generic(): RX 6 characters, direct=1
0000 fe fe e0 90 fa fd ......
4:frame.c(352):icom_one_transaction returning(-9) rigctld.c(626) Startup: rigctld -vvvvv -m 3072 -r COM1
rigctld Hamlib 4.5~git Tue May 17 22:03:48 2022 +0000 SHA=468dd1
Report bugs to [email protected]

Lingua principale
C
Stelle
1.2k
Fork
305
Merge medio
8h 48m
PR unite (30g)
3

Preparare l'ambiente

Come iniziare

  1. Leggi tutta la issue e poi la guida ai contributi del progetto.
  2. Commenta sulla issue per dire che te ne occupi tu — evita che due persone facciano lo stesso lavoro.
  3. Fai un fork del repository e lavora su un branch.
  4. Apri una pull request che faccia riferimento al numero della issue.

Altre issue di csete/gpredict

Tutte le issue di csete/gpredict

Issue simili

Altre issue su C

Ricevi le nuove issue nella tua casella

Un breve riepilogo di issue GitHub adatte ai principianti.