Hacktoberfest 2026: le issue che i maintainer hanno segnato per ottobre, aperte e adatte ai principianti. Sfoglia le issue Hacktoberfest

STM32H7x option_write reads incorrect address in flash

Aperta
  • Qualcosa non va?
#45 0 commenti 0 reazioni 0 assegnatari Vedi su GitHub

Nessuno ha ancora preso questa issue.

Valutazione

Difficoltà
4/5
Tempo stimato
3-5 giorni
Idoneità per principianti
45/100
Tipo di issue
Bug
Chiarezza
Abbastanza chiara
Stato di attività
Ferma
Stack tecnologico
c
Ambito
devtools, embedded-iot

Direzione di ricerca

Start in src/flash/nor/stm32h7x.c and compare stm32h7_read_flash_reg_by_index, used by option_write, with stm32x_read_flash_reg, used by option_read. Reproduce with the STM32H757BIT6 configuration, then run the documented stm32h7x option_read and option_write commands across the referenced commits. Done means option_write reads the correct flash address and updates the option byte as expected.

Scritto dal modello di indicizzazione a partire dal testo della issue.

Descrizione

A recently added support for STM32H7R/H7Sx MCUs (https://github.com/STMicroelectronics/OpenOCD/commit/aa109db19ffd22eb05e18b010140fb562934533b) broke stm32h7x option_write command on STM32H757BIT6. I tested stm32h7x option_write command with 3 different commits:

Hardware

  • STM32H757BIT6 - dual core
  • STLINK-V3MINIE

Software

OpenOCD is running in a Docker container:

RUN git clone https://github.com/STMicroelectronics/OpenOCD.git && \
    cd OpenOCD && \
    git checkout insert_git_commit_here && \
    ./bootstrap && \
    ./configure --enable-stlink && \
    make -j$(nproc) && \
    make install && \
    cd .. && \
    rm -rf OpenOCD

I am running OpenOCD with the following command
openocd -f openocd_stm32h757.cfg

I am connecting to the OpenOCD with telnet
telnet 127.0.0.1 4444

Configuration file:
# openocd_stm32h757.cfg
source [find interface/stlink-dap.cfg]
transport select dapdirect_swd
source [find target/stm32h7x_dual_bank.cfg]
reset_config srst_only

Test results

I tried disabling booting of CM4 by changing option byte FLASH_OPTSR_PRG and also tried stm32h7x option_write example in the OpenOCD documentation section 12.5.2. The output of the commands tested with different commits are shown in a table below. Only commit b62cbc2 produced expected results and wrote the option byte.

Command Most recent https://github.com/STMicroelectronics/OpenOCD/commit/0a084c29345576911fb8d10fcbd158d0361b6186 STM32H7R/H7Sx support https://github.com/STMicroelectronics/OpenOCD/commit/aa109db19ffd22eb05e18b010140fb562934533b Prior to adding support https://github.com/STMicroelectronics/OpenOCD/commit/b62cbc2e853189e730fd94e6d9c0a1d3ceb2661f
reset - - -
stm32h7x option_read 0 0x1c Option Register: <0x5200201c> = 0x1bc6aaf0 Option Register: <0x5200201c> = 0x1bc6aaf0 Option Register: <0x5200201c> = 0x1bc6aaf0
stm32h7x option_write 0 0x20 0x00000000 0x00400000 Failed to read memory at 0x51e3be78
error while reading from address 0x51e3be78		 Failed to read memory at 0xe000edf4
error while reading from address 0x856d9473		 -
stm32h7x option_read 0 0x1c Option Register: <0x5200201c> = 0x1bc6aaf0 Option Register: <0x5200201c> = 0x1bc6aaf0 Option Register: <0x5200201c> = 0x1b86aaf0
stm32h7x option_write 0 0x20 0x8000000 0x8000000 Failed to read memory at 0x51e3be78
error while reading from address 0x51e3be78		 Failed to read memory at 0xe000edf4
error while reading from address 0x856d9473		 -
stm32h7x option_read 0 0x1c Option Register: <0x5200201c> = 0x1bc6aaf0 Option Register: <0x5200201c> = 0x1bc6aaf0 Option Register: <0x5200201c> = 0x1b86aaf0

Observations

Different functions are used in src/flash/nor/stm32h7x.c for reading values for commands option_read and option_write.

commit OpenOCD command function in stm32h7x.c
aa109db stm32h7x option_read stm32x_read_flash_reg
aa109db stm32h7x option_write stm32h7_read_flash_reg_by_index
b310b3b stm32h7x option_read stm32x_read_flash_reg
b310b3b stm32h7x option_write stm32x_read_flash_reg

Conclusion

It seems function stm32h7_read_flash_reg_by_index in src/flash/nor/stm32h7x.c used in option_write command reads incorrect address from flash.

Thanks in advance!

Lingua principale
C
Stelle
205
Fork
59
Nessuna PR unita negli ultimi 30g

Preparare l'ambiente

Questo progetto non fornisce container di sviluppo, Dockerfile né guida per i contributori, quindi l'ambiente è a tuo carico: parti dal suo README e consulta la nostra guida al primo contributo per i passaggi generali.

Come iniziare

  1. Leggi tutta la issue e poi la guida ai contributi del progetto.
  2. Commenta sulla issue per dire che te ne occupi tu — evita che due persone facciano lo stesso lavoro.
  3. Fai un fork del repository e lavora su un branch.
  4. Apri una pull request che faccia riferimento al numero della issue.

Altre issue di STMicroelectronics/OpenOCD

Tutte le issue di STMicroelectronics/OpenOCD

Issue simili

Altre issue su C

Ricevi le nuove issue nella tua casella

Un breve riepilogo di issue GitHub adatte ai principianti.