Misdetection of 512Kbit breakout board?
Personne n'a encore pris cette issue.
Évaluation
- Difficulté
- 3/5
- Temps estimé
- 1-2 jours
- Accessibilité débutants
- 32/100
- Type d'issue
- Bug
- Clarté
- À clarifier
- Activité
- À l'abandon
- Stack technique
- cpp
- Domaine
- embedded-iot
Piste de recherche
Start by comparing the detectMemorySizeBytes and getMemorySizeBytes entry points used by the examples, then inspect SparkFun_External_EEPROM.cpp around the reported write warning. Reproduce both examples with the 512Kbit breakout board and trace how the detected size is derived. Done means the examples consistently report the board's size and the compiler warning has been addressed.
Rédigé par le modèle d'indexation à partir du texte de l'issue.
Description
Subject of the issue
DetectSettings examples appear to mis-identify 512Kbit i2c breakout board.
I recently purchased (1) "SparkFun Qwiic EEPROM Breakout - 512Kbit" ( https://www.sparkfun.com/products/18355 )
After soldering the header on, I hooked it up to an Arduino Uno, installed the Sparkfun External EEPROM library (this one), and gave it a go.
The results:
17:49:47.133 -> Qwiic EEPROM example
17:49:47.133 -> Memory detected!
17:49:47.133 -> Detected number of address bytes: 2
17:49:47.133 -> Detected pageSizeBytes: 128
17:49:47.359 -> Detected page write time (ms): 2
17:49:47.390 -> Detected EEPROM size (bytes): 16 bytes / 128 Bits - 24XX00
My understanding is that I have the "24xx512" (2 address bytes, 128 byte page size).
These appear to be correctly detected.
However, the detection of the EEPROM size itself comes back what appears to be wrong as can be seen above.
I am powering the device over USB.
Then I tried example 7, which yielded:
17:53:02.652 -> Qwiic EEPROM example
17:53:02.652 -> Memory detected!
17:53:03.005 -> Detected pageSizeBytes: 128
17:53:03.232 -> Detected EEPROM size (bytes): 4096 bytes / 32 kBits - 24XX32
17:53:03.232 -> Checking memory: Good
17:53:03.457 -> I read (should be 200): 200
17:53:03.457 -> I read (should be -366): -366
17:53:03.457 -> I read (should be -7.35): -7.35
17:53:03.490 -> I read: Hi, I am just a simple test string
17:53:03.490 -> Next available EEPROM location: 105
This is detecting an EEPROM size of 4KB (24XX32).
Hence my confusion.
The former is using detectMemorySizeBytes and the latter is using getMemorySizeBytes.
It's not clear to me what the difference is.
Although unrelated, there is also a compile-time warning:
.../Arduino/libraries/SparkFun_External_EEPROM_Arduino_Library/src/SparkFun_External_EEPROM.cpp: In member function 'int ExternalEEPROM::write(uint32_t, const uint8_t*, uint16_t)':
.../Arduino/libraries/SparkFun_External_EEPROM_Arduino_Library/src/SparkFun_External_EEPROM.cpp:879:32: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
for (uint16_t x = 0; x < amtToWrite; x++)
~~^~~~~~~~~~~~
- Langage dominant
- C++
- Étoiles
- 67
- Forks
- 23
- Métriques de merge des PR
- Aucune PR mergée en 30 j
Préparer son environnement
Ce projet ne fournit ni conteneur de développement, ni Dockerfile, ni guide de contribution : l'installation est à votre charge. Commencez par son README, et consultez notre guide de la première contribution pour les étapes générales.
Par où commencer
- Lisez l'issue en entier, puis le guide de contribution du projet.
- Signalez en commentaire que vous la prenez — cela évite que deux personnes fassent le même travail.
- Forkez le dépôt et travaillez sur une branche.
- Ouvrez une pull request qui référence le numéro de l'issue.
Autres issues de sparkfun/SparkFun_External_EEPROM_Arduino_Library
-
Use of Software I²C ?Ouverte
Difficulté 5/5 Plus d'une semaine Accessibilité débutants 25/100
sparkfun/SparkFun_External_EEPROM_Arduino_Library#41 · 1 commentaire ·
-
Return type of put and get.Peut-être pris @Harry2907 l’a pris il y a 109 jours. Ouverte
Difficulté 5/5 Plus d'une semaine Accessibilité débutants 25/100
sparkfun/SparkFun_External_EEPROM_Arduino_Library#36 · 2 commentaires ·
Toutes les issues de sparkfun/SparkFun_External_EEPROM_Arduino_Library
Issues similaires
-
area:decoder area:libnvmpi bug P3
Difficulté 2/5 1-3 heures Accessibilité débutants 78/100
gjrtimmer/jetson-nvmpi#164 ·
-
LSan reports obj_gen leak on post-parse usage() exits (aarch64)Peut-être pris Une pull request liée à cette issue est ouverte ou déjà fusionnée. Ouverte
Difficulté 2/5 1-3 heures Accessibilité débutants 76/100
redis/memtier_benchmark#850 ·
Les mainteneurs répondent en général sous 1 jour
-
bug-unconfirmed
Difficulté 1/5 Moins d'une heure Accessibilité débutants 91/100
Les mainteneurs répondent en général sous 1 jour
-
Status: Needs confirmation Status: Needs triage
Difficulté 1/5 1-3 heures Accessibilité débutants 77/100
FreeCAD/FreeCAD#33863 · 1 commentaire ·
Les mainteneurs répondent en général sous 1 jour
-
bug
Difficulté 2/5 1-3 heures Accessibilité débutants 68/100
pawelsalawa/letos#5839 ·