How to change the primary UART of a Raspberry Pi
Évaluation
Cette issue n'a pas encore été évaluée.
Description
Related to https://github.com/raspberrypi/documentation/issues/3239.
Context:
- The primary UART is where the Linux console appears.
- On most Raspberry Pis, the primary UART appears on the GPIO header.
- For Raspberry Pi 5, the primary UART appears on the Debug header.
Use case:
When switching to Pi 5 from older versions, people get confused because the primary UART has changed, and they do not see the console as expected. This confusion may persist into the future with new Pi models and as people upgrade their hardware.
Current state:
The bullet points above already exist in the documentation. However, we do not currently document how to change the primary UART of a Raspberry Pi.
Possible docs solutions:
-
Create a troubleshooting section for "the console does not appear" somewhere under initial configuration or UART configuration. This troubleshooting section could be expanded with multiple solutions, including the information here about using the correct primary UART for a given Raspberry Pi model.
-
Add "Changing the primary UART" to https://www.raspberrypi.com/documentation/computers/configuration.html#configure-uarts. This comment by Phil explains how to change the primary UART of the Pi 5 to the GPIO header. If we create this section, we would need to confirm instructions for all Pi models.
- Langage dominant
- Python
- Étoiles
- 5.6k
- Forks
- 2.1k
- Métriques de merge des PR
- Aucune PR mergée en 30 j
Préparer son environnement
- Aucun Dockerfile ni fichier Docker Compose
- Aucun modèle de pull request
- Lire le guide de contribution
Par où commencer
- Lisez l'issue en entier, puis le guide de contribution du projet.
- Signalez en commentaire que vous la prenez — cela évite que deux personnes fassent le même travail.
- Forkez le dépôt et travaillez sur une branche.
- Ouvrez une pull request qui référence le numéro de l'issue.
Autres issues de raspberrypi/documentation
-
One Time Programmable memory map incorrectPeut-être à nouveau libre @timg236 l’a pris il y a 85 jours, et aucune pull request n’est ouverte. Ouvertewhite paper
raspberrypi/documentation#4319 · 2 commentaires · 2 personnes assignées ·
-
Pico-SDK use of Red Text on Pure Black Background Strains EyesPeut-être à nouveau libre @katshann-raspberry l’a pris il y a 100 jours, et aucune pull request n’est ouverte. Ouvertebacklog doxygen
raspberrypi/documentation#4156 · 6 commentaires · 1 personne assignée ·
-
GPIO and the 40-pin header: legend embedded in associated image is outdatedPeut-être à nouveau libre @stevedavies-rp l’a pris il y a 100 jours, et aucune pull request n’est ouverte. Ouvertebacklog diagram
raspberrypi/documentation#4124 · 3 commentaires · 1 personne assignée ·
-
Solution: Sync Flash to GS Camera with use of the XVS PIN and an Pico or ArduinoPeut-être à nouveau libre @lucyhattersley l’a pris il y a 47 jours, et aucune pull request n’est ouverte. Ouvertebacklog camera 📷 tutorial 📘
raspberrypi/documentation#4034 · 9 commentaires · 1 personne assignée ·
-
Update needed to "Raspberry Pi Debug Probe" for PICO 2Peut-être à nouveau libre @katshann-raspberry l’a pris il y a 100 jours, et aucune pull request n’est ouverte. Ouvertebacklog restructure rp2040
raspberrypi/documentation#4003 · 10 commentaires · 1 personne assignée ·
Toutes les issues de raspberrypi/documentation
Issues similaires
-
HassSetVolumeRelative reports no targets (empty success list) although the volume was changedOuverteintegration: media_player
Difficulté 2/5 1-3 heures Accessibilité débutants 82/100
home-assistant/core#193344 · 2 commentaires ·
Les mainteneurs répondent en général sous 1 jour
-
Difficulté 1/5 Moins d'une heure Accessibilité débutants 82/100
daniel-ospina/tortoise#13607 ·
Les mainteneurs répondent en général sous 1 jour
-
documentation priority: medium
Difficulté 2/5 1-3 heures Accessibilité débutants 72/100
Les mainteneurs répondent en général sous 1 jour
-
Difficulté 2/5 1-3 heures Accessibilité débutants 66/100
Les mainteneurs répondent en général sous 1 jour
-
needs-triage
Difficulté 2/5 1-3 heures Accessibilité débutants 78/100
Les mainteneurs répondent en général sous 1 jour