[Bug]: UEFI PXE network boot device missing with VirtualBox 7.2.22 on Arch Linux

Ouverte
#963 0 commentaires 0 réactions 0 personnes assignées Voir sur GitHub

Les mainteneurs répondent en général sous 6 jours

Personne n'a encore pris cette issue.

Évaluation

Difficulté
4/5
Temps estimé
3-5 jours
Accessibilité débutants
44/100
Type d'issue
Bug
Clarté
Plutôt claire
Activité
Active
Stack technique
c

Piste de recherche

Start by reproducing the report with VirtualBox 7.2.22 using an x86_64 VM with EFI64 and an Intel PRO/1000 MT Desktop adapter on an Internal Network. Read the attached log and inspect the EFI and network boot code paths to find why the adapter is missing from the UEFI Boot Manager. Done means the PXE boot entry appears and the VM can boot over the network with this setup.

Rédigé par le modèle d'indexation à partir du texte de l'issue.

Description

bug
Version

7.2.22

Host OS Type

Linux

Host OS name + version

Arch Linux 6.18.60-1-lts

Host Architecture

x86

Guest OS Type

Linux

Guest Architecture

x86

Guest OS name + version

Debian 13.7

Component

EFI

What happened?

I was experimenting with PXE booting and was able to boot successfully using legacy BIOS. However, when I enabled EFI64, the VM failed to boot, and the virtual network adapter did not even appear as a bootable network device in the UEFI Boot Manager.

Image

debianPXE-2026-11-08.log

How can we reproduce this?
  1. Create an x86_64 VM.
  2. Enable EFI64 firmware.
  3. Configure an Intel PRO/1000 MT Desktop (82540EM) network adapter.
  4. Connect the network adapter to an Internal Network.
  5. Set the VM's boot order to prioritize Network.
  6. Start the VM. PXE boot is expected to fail.
  7. Open the UEFI Boot Manager and verify that no PXE boot entry is available.
Did you upload all of your necessary log files, screenshots, etc.?
  • Yes, I've uploaded all pertinent files to this issue.
Langage dominant
C
Étoiles
1.4k
Forks
219
Métriques de merge des PR
Aucune PR mergée en 30 j

Préparer son environnement

Par où commencer

  1. Lisez l'issue en entier, puis le guide de contribution du projet.
  2. Signalez en commentaire que vous la prenez — cela évite que deux personnes fassent le même travail.
  3. Forkez le dépôt et travaillez sur une branche.
  4. Ouvrez une pull request qui référence le numéro de l'issue.

Autres issues de VirtualBox/virtualbox

Toutes les issues de VirtualBox/virtualbox

Issues similaires

Plus d'issues C

Recevez les nouvelles issues par e-mail

Un résumé court des issues GitHub adaptées aux débutants.