[Bug] nvme: kernel heap memory leak per inactive namespace in nvme_scan_device() exhausts system heap and can brick boot

Ouverte
#11,919 5 commentaires 0 réactions 1 personne assignée Voir sur GitHub

Les mainteneurs répondent en général sous 2 jours

@usualtreee y travaille déjà.

Depuis le 23/10/2026.

Évaluation

Cette issue n'a pas encore été évaluée.

Description

in progress

Title: [Bug] nvme: kernel heap memory leak per inactive namespace in nvme_scan_device() exhausts system heap and can brick boot

RT-Thread Version
v5.2.0, v5.2.1, v5.2.2, v5.3.0 and current master (introduced by commit 945114fd5, 2024-11-24, "[DM/FEATURE] Support NVME (#9591)")

Affected area
Device drivers (components/drivers/nvme/nvme.c)

Hardware-BSP vendor
QEMU (qemu-virt64-aarch64 BSP, default .config already enables RT_USING_NVME + RT_NVME_PCI); any board with an NVMe controller

Architecture
ARM64 (also affects any arch using this driver)

Board and hardware details
QEMU virt machine (-M virt) with a stock nvme PCI device (QEMU 9.2.3, unmodified). No special hardware is needed: any NVMe controller whose Identify Controller nn (Number of Namespaces) field is larger than its count of active namespaces triggers the leak. Note QEMU itself always reports nn = 256 while exposing 1 namespace, which is legal per the NVMe spec, so the leak reproduces with a fully compliant device response.

Develop Toolchain
GCC (aarch64 toolchain), scons, QEMU 9.2.3

Describe the bug

nvme_scan_device() (components/drivers/nvme/nvme.c) iterates nsid = 1 .. nn using the device-controlled nn field from the Identify Controller response, and allocates a 4480-byte struct rt_nvme_device (rt_calloc) before issuing the per-namespace Identify command:

for (rt_uint32_t nsid = 1; nsid <= number_of_ns; ++nsid)
{
    struct rt_nvme_device *ndev = rt_calloc(1, sizeof(*ndev));   /* 4480 B */
    ...
    if ((err = nvme_identify(nvme, nsid, 0, id)))
    {
        goto _free_res;      /* leak: ndev not freed */
    }
    if (!id->nsze)
    {
        continue;            /* leak: ndev not freed */   <-- main path
    }
    ...

Every namespace that reports nsze == 0 (inactive/allocated-but-not-active namespaces — a perfectly legal response; e.g. QEMU returns an all-zero structure for every non-attached nsid), and every failed identify, leaks 4480 bytes (4536 bytes with the memheap header) of the kernel system heap. The leaked memory is never recovered; the reference is simply dropped.

Measured impact, full-chain on the official qemu-virt64-aarch64 BSP with the default config (free via the free msh command):

device response kernel heap available after boot
no NVMe device 66,941,784 B
nn = 1 (single active ns) 66,931,592 B (disk nvme0n1 registered, healthy)
stock QEMU (nn = 256, 1 active ns) 65,774,912 B — 1,156,872 B (≈1.1 MiB) leaked = 255 × 4536 B

So with the stock, unmodified QEMU NVMe device (a legal nn = 256 response), every boot loses ~1.8 % of a 64 MiB kernel heap. Repeated controller re-registration (hot-plug / surprise removal + rescan) accumulates the leak linearly.

With a larger device-controlled nn (malformed or malicious controller firmware, e.g. nn = 0xFFFFFF), the loop keeps allocating until the kernel heap is fully exhausted, which happens deterministically before main() can start the shell — the system never reaches the msh prompt (boot bricked):

=== OOM POINT === nsid=14758 avail=600 maxused=67108264      (64 MiB heap)
#0  nvme_scan_device (nvme=0xffff000000263b78, number_of_ns=16384) at components/drivers/nvme/nvme.c:1079
#1  rt_nvme_controller_register (nvme=0xffff000000263b78) at components/drivers/nvme/nvme.c:1216
#2  pci_nvme_probe (pdev=0xffff000000263838) at components/drivers/nvme/nvme-pci.c:95
#3  pci_probe (dev=0xffff00000000038) at components/drivers/pci/pci.c:1050

(serial console output stops permanently after hello rt-thread; no msh /> prompt is ever printed)

To reproduce

  1. Build the official qemu-virt64-aarch64 BSP (default .config, RT_USING_NVME is already on).
  2. Create a raw disk image, boot with a stock QEMU nvme device (QEMU reports nn=256 for 1 active namespace — no device model modification needed):
    dd if=/dev/zero of=/tmp/nvme.img bs=1M count=16
    qemu-system-aarch64 -M virt,gic-version=2 -cpu max -m 128M \
        -kernel rtthread.bin -serial <console> \
        -drive file=/tmp/nvme.img,if=none,id=nvme0 \
        -device nvme,drive=nvme0
    
  3. Run free in msh and compare with a boot without the nvme device: ~1.1 MiB of the kernel heap is gone after a single boot; list_blk shows the disk otherwise working normally.
  4. GDB confirmation (gdb-multiarch): break at the if (!id->nsze) continue; branch (nvme.c:1091) — it is hit once per inactive nsid (2..256 with stock QEMU), and system_heap->available_size drops by exactly 4536 bytes on each hit.

Expected behaviour
ndev must be allocated only after the namespace is known to be active (nsze != 0 and identify succeeded), or freed on the nsze == 0 / identify-error paths; nn should also not be trusted as a loop bound without an upper limit (e.g. cap by mnan or a sane maximum, and/or use the Active Namespace ID list, CNS 02h).

Actual behaviour
4480 bytes leaked per inactive namespace per controller registration; kernel heap exhaustion and an unbootable system with a large device-reported nn.

Other additional context

  • CWE-401 (Missing Release of Memory after Effective Lifetime).
  • CVSS 3.1: AV:P/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H = 4.9 (Medium).
  • Attack prerequisites (explicit): the attacker must attach a malformed/malicious NVMe controller (AV:P) for the heap-exhaustion/brick outcome; the per-boot 1.1 MiB leak however requires no attacker at all — any compliant drive reporting nn larger than its active namespace count triggers it (QEMU's stock nvme device is one example, tested here).
  • Same device-controlled-metadata parser family as previously reported mtd-cfi (#11272) and usbhost (#11287/#11288) issues, which were accepted.
  • No existing CVE/issue covers this (searched NVD, this repo's issues/PRs/branches; nvme-related items are #9591 feature, #10672 errno fix, #11650 DMA-address fix).
  • Verified present in master (blob 260e1fb04) as of 2026-10-23; introduced in 945114fd5 (first release containing it: v5.2.0).
Langage dominant
C
Étoiles
12.4k
Forks
5.5k
Merge moyen
3 j 7 h
PR mergées (30 j)
79

Préparer son environnement

Ouvrir dans Codespaces

Lance le conteneur de développement du projet dans votre navigateur, avec votre propre compte GitHub.

Par où commencer

  1. Lisez l'issue en entier, puis le guide de contribution du projet.
  2. Signalez en commentaire que vous la prenez — cela évite que deux personnes fassent le même travail.
  3. Forkez le dépôt et travaillez sur une branche.
  4. Ouvrez une pull request qui référence le numéro de l'issue.

Autres issues de RT-Thread/rt-thread

Toutes les issues de RT-Thread/rt-thread

Issues similaires

Plus d'issues C

Recevez les nouvelles issues par e-mail

Un résumé court des issues GitHub adaptées aux débutants.