Generic webhook template doesn't identify which metric attribute/label combination (e.g. trace name) triggered the alert
Les mainteneurs répondent en général sous 1 jour
Personne n'a encore pris cette issue.
Évaluation
- Difficulté
- 5/5
- Temps estimé
- Plus d'une semaine
- Accessibilité débutants
- 45/100
- Type d'issue
- Fonctionnalité
- Clarté
- Plutôt claire
- Activité
- Calme
- Stack technique
- typescript
- Domaine
- observability
Piste de recherche
L’issue ne nomme ni fichiers ni tests. Commencez par localiser la gestion des modèles génériques de webhook, l’évaluation des alertes de métriques et les chemins d’historique des alertes de External API v2 ; suivez comment les labels de série implicites et explicites parviennent jusqu’au déclenchement. Le travail est terminé lorsque les combinaisons d’attributs qui dépassent le seuil sont disponibles dans les modèles de webhook et les réponses de l’historique des alertes, avec un comportement défini pour une ou plusieurs livraisons de webhook.
Rédigé par le modèle d'indexation à partir du texte de l'issue.
Description
My alert is on a dashboard tile with a single series: a metrics data source, a gauge aggregation, and a where clause — no groupBy is configured anywhere in the tile. Despite that, the chart renders multiple lines, because the underlying OTel metric carries multiple distinct attribute/label combinations (e.g. per trace/span name), and HyperDX implicitly plots one line per unique combination even though I never set an explicit group-by.
When the alert fires, the generic webhook body currently supports {{title}}, {{body}}, {{link}}, {{state}}, {{startTime}}, {{endTime}}, and {{eventId}}. None of these identify which underlying attribute combination (e.g. which trace name) actually crossed the threshold — the payload describes the alert's overall state and timing, but has no reference to the specific label values that produced the offending line.
This makes it impossible to route or triage generic webhook alerts without manually opening the dashboard and visually picking out which of the several implicit lines crossed the threshold. For downstream automation (custom incident routing, deduping, auto-annotating tickets, posting to the right team channel, etc.) this is a hard blocker — the alert is not attributable to a specific cause without a human eyeballing the chart.
Current behavior
- Dashboard tile: single series, metrics data source, gauge value,
whereclause. NogroupByconfigured. - The metric itself has multiple attribute/label combinations (e.g. per-trace or per-span name), so the tile implicitly renders several lines even without an explicit group-by.
- Alert is attached to this tile/series.
- On firing, the generic webhook body supports
{{title}},{{body}},{{link}},{{state}},{{startTime}},{{endTime}}, and{{eventId}}. - None of these resolve to the specific attribute/label combination (e.g. trace name) whose line crossed the threshold —
{{link}}sends you to the tile, and the rest describe the alert's state/timing/ID, but none carry the identity of the offending line. You still have to visually inspect the chart to identify it.
Expected behavior
The webhook payload/template should include the specific attribute/label combination that breached the threshold for that firing — e.g. a {{seriesLabels}} or {{attributeValue}} (name TBD) template variable, populated with the trace name / span name / other metric attribute value that produced the crossing line.
This is closely related to (and possibly the same underlying gap as) groupBy-based alerts not surfacing the specific group value that fired — in both cases, the tile can implicitly or explicitly contain multiple lines, and the webhook has no way to say which one triggered.
Why this matters
Without this, generic webhook consumers (custom bots, incident routing via generic webhook, internal Slack bots, etc.) can only say "something on this metric tile crossed a threshold" — not "trace X crossed the threshold." For any metric with multiple attribute combinations feeding one tile, this makes the alert nearly useless for automated triage; a human has to click through and visually inspect the chart every time just to know what actually needs attention.
Suggested implementation
- Add a template variable (e.g.
{{seriesLabels}}) available in the generic webhook body template, populated per-firing with the specific attribute/label combination (as key-value pairs) of the line that breached. - Since a metric-source tile with no explicit
groupBycan still implicitly fan out into many lines by attribute combination, consider either:- firing one webhook call per breaching attribute combination (each with its own labels), or
- including an array of breaching attribute combinations in the payload if a single call is preferred.
- Apply the equivalent fix for explicit
groupBy-based alerts (surface the specific group value that fired, not just the field being grouped on) — same underlying gap, different mechanism for producing multiple lines. - Expose the same field on the External API v2 alert-history/evaluation response, if separate from the webhook payload, so it's fetchable after the fact too.
Environment
- Alert type: Dashboard tile alert (chart), single series, metrics data source, gauge aggregation,
whereclause, nogroupByconfigured - Multiple alerts appear implicitly due to distinct attribute/label combinations in the underlying metric
- Notification channel: Generic Webhook
- Langage dominant
- TypeScript
- Étoiles
- 10.1k
- Forks
- 527
- Merge moyen
- 1 j 20 h
- PR mergées (30 j)
- 186
Préparer son environnement
- Fournit un Dockerfile ou un fichier Docker Compose
- Propose un modèle de pull request
- Lire le guide de contribution
Par où commencer
- Lisez l'issue en entier, puis le guide de contribution du projet.
- Signalez en commentaire que vous la prenez — cela évite que deux personnes fassent le même travail.
- Forkez le dépôt et travaillez sur une branche.
- Ouvrez une pull request qui référence le numéro de l'issue.
Autres issues de ClickHouse/ClickStack
-
external
Difficulté 2/5 1-3 heures Accessibilité débutants 72/100
ClickHouse/ClickStack#3761 ·
Les mainteneurs répondent en général sous 1 jour
-
Metric chart with aggFn increase and a multi-column group-by fails: toString() gets several argumentsPeut-être pris @CG-5228 l’a pris il y a 26 jours. Ouverteexternal
Difficulté 2/5 1-3 heures Accessibilité débutants 76/100
ClickHouse/ClickStack#3477 · 1 commentaire ·
Les mainteneurs répondent en général sous 1 jour
-
Slack notifications for inline alerts fail when the chart-explorer link passes Slack's 3000-character block limitPeut-être pris @Tyagiquamar l’a pris il y a 27 jours. Ouvertealerting bug external
Difficulté 2/5 1-3 heures Accessibilité débutants 76/100
ClickHouse/ClickStack#3452 ·
Les mainteneurs répondent en général sous 1 jour
-
check-alerts worker: 13 error spans (mongodb.create, NamespaceExists) every minute because mongoose autoCreate is still onPeut-être à nouveau libre Une pull request pour cette issue a été fermée sans être fusionnée. Ouvertebug external Needs Feedback
Difficulté 2/5 1-3 heures Accessibilité débutants 72/100
ClickHouse/ClickStack#3308 · 1 commentaire ·
Les mainteneurs répondent en général sous 1 jour
-
count_distinct aggFn on metric tiles ignores valueExpression, always counts distinct metric ValuesPeut-être pris @Harshul1484 l’a pris il y a 54 jours. Ouverte
Difficulté 2/5 1-3 heures Accessibilité débutants 72/100
ClickHouse/ClickStack#2311 ·
Les mainteneurs répondent en général sous 1 jour
Toutes les issues de ClickHouse/ClickStack
Issues similaires
-
Add: GTrekkerOuvertecheck:passed streams:add
Difficulté 1/5 Moins d'une heure Accessibilité débutants 72/100
Les mainteneurs répondent en général sous 1 jour
-
area: ui Bug Payload OSS
Difficulté 1/5 Moins d'une heure Accessibilité débutants 88/100
payloadcms/payload#19839 ·
Les mainteneurs répondent en général sous 1 jour
-
Difficulté 2/5 1-3 heures Accessibilité débutants 85/100
Les mainteneurs répondent en général sous 1 jour
-
fix(auth): add the email OTP verification step to Pollar loginPeut-être pris @akansnoro l’a pris aujourd’hui. OuverteStellar Wave
Difficulté 2/5 1-3 heures Accessibilité débutants 74/100
safetrustcr/dApp-SafeTrust#584 · 10 commentaires ·
Les mainteneurs répondent en général sous 1 jour
-
The manager preset saves launch definitions without the required file and digest pairPeut-être pris Une pull request liée à cette issue est ouverte ou déjà fusionnée. Ouvertebug
Difficulté 2/5 1-3 heures Accessibilité débutants 80/100
Les mainteneurs répondent en général sous 1 jour