A successfully acked message is redelivered long before its visibility timeout expires

Abierto
  • ¿Algo no está bien?
#824 2 comentarios 0 reacciones 0 asignados Ver en GitHub

Los mantenedores suelen responder en 2 días

Nadie ha tomado este issue todavía.

Evaluación

Dificultad
4/5
Tiempo estimado
3-5 días
Aptitud para principiantes
52/100
Tipo de issue
Error
Claridad
Bastante claro
Estado de actividad
Activo
Stack tecnológico
go
Área
distributed-systems

Línea de trabajo

Start by tracing the message ack and visibility-timeout delivery paths, then inspect how delivery-state rows are updated and garbage-collected. Reproduce the reported redelivery under load and compare the stored ack state and invisible_until with the configured 60-second timeout. Done means identifying and fixing the cause so a successfully acked message is not redelivered before its visibility timeout.

Escrito por el modelo de indexación a partir del texto del issue.

Descripción

bug

Problem

A message that a consumer processed successfully, and reported as processed, was redelivered about 12 seconds later, against a 60-second visibility timeout and with a single consumer running. The redelivery reported attempt: 2, so it came through the visibility-timeout path on a delivery-state row that was still unacked.

Impact

The duplicate propagated: Runway answered the same merge-conflict-check twice, and the batch stage created a second batch for the same request. The pipeline absorbed it, and the duplicate batches failed, but each one cost a full speculation and build cycle. If a successful ack can be redelivered at a fifth of its visibility timeout, at-least-once delivery is firing far more often than intended.

Not yet established

Either the ack did not set acked, despite the consumer reporting success, or invisible_until was shorter than configured. The delivery-state row had already been garbage-collected, so it could not be inspected. This reproduced under load (a 20-request demo run) and not on smaller runs.

Status

No fixing change has been identified on main.

Lenguaje dominante
Go
Estrellas
247
Forks
16
Merge medio
2 d 1 h
PR fusionados (30 d)
125

Preparar el entorno

Primeros pasos

  1. Lee el issue completo y luego la guía de contribución del proyecto.
  2. Comenta en el issue que vas a ocuparte — evita que dos personas hagan lo mismo.
  3. Haz un fork del repositorio y trabaja en una rama.
  4. Abre un pull request que haga referencia al número del issue.

Más de uber/submitqueue

Todos los issues de uber/submitqueue

Issues similares

Más issues de Go

Recibe los nuevos issues en tu correo

Un resumen breve de issues de GitHub para principiantes.