Measure Localization Accuracy and Pipeline Performance
Los mantenedores suelen responder en 2 días
Nadie ha tomado este issue todavía.
Evaluación
- Dificultad
- 5/5
- Tiempo estimado
- Más de una semana
- Aptitud para principiantes
- 22/100
- Tipo de issue
- Nueva funcionalidad
- Claridad
- Bastante claro
- Estado de actividad
- Activo
- Stack tecnológico
- rust
- Área
- performance, robotics
Línea de trabajo
The issue names no files, so start by finding the preprocessing-to-NDT pipeline in the repository and noting its stages: crop box filtering, voxel grid downsampling and NDT scan matching. Check whether any timing or memory hooks already exist. Done means a documented metric and timing-boundary definition, plus a machine-readable export with sample counts and a reproducible command. Confirm the scope with maintainers first, since the work is large and design-heavy.
Escrito por el modelo de indexación a partir del texto del issue.
Descripción
Establish a reproducible evaluation workflow for localization accuracy, execution time, end-to-end latency, and memory usage of the Awkernel preprocessing-to-NDT pipeline.
Scope:
- Evaluate position and orientation errors against timestamp-aligned ground-truth poses where available
- Measure execution time for crop box filtering, voxel grid downsampling, and NDT scan matching
- Measure end-to-end latency from scan availability at the pipeline input to publication of the corresponding localization result
- Distinguish processing time from queueing, scheduling, and data-transfer delays
- Measure peak memory usage, separating map preparation, persistent map storage, and per-scan processing
- Record workload characteristics, including point counts, NDT iteration counts, and convergence outcomes
Acceptance criteria:
- Metric definitions, timing boundaries, coordinate frames, and measurement methods are documented.
- Accuracy results include position and orientation error distributions, with ground-truth sources and alignment procedures specified.
- Datasets without ground truth are explicitly identified; reference-output differences are not reported as ground-truth accuracy.
- Timing results include median, tail percentiles, and maximum observed values, together with sample counts.
- Failed, non-converged, and dropped scans are reported rather than silently excluded.
- Peak memory measurements identify which allocations and buffers are included.
- Hardware, software versions, parameters, replay rate, warm-up procedure, and instrumentation overhead are recorded.
- Results are exported in a machine-readable format with reproducible evaluation commands.
Out of scope:
Formal worst-case execution-time guarantees, EKF integration, vehicle-control evaluation, and broad scheduler comparisons.
- Lenguaje dominante
- Rust
- Estrellas
- 282
- Forks
- 12
- Merge medio
- 2 d 9 h
- PR fusionados (30 d)
- 28
Preparar el entorno
Este proyecto no incluye contenedor de desarrollo, Dockerfile ni guía de contribución, así que la configuración corre por tu cuenta: empieza por su README y consulta nuestra guía para la primera contribución para los pasos generales.
Primeros pasos
- Lee el issue completo y luego la guía de contribución del proyecto.
- Comenta en el issue que vas a ocuparte — evita que dos personas hagan lo mismo.
- Haz un fork del repositorio y trabaja en una rama.
- Abre un pull request que haga referencia al número del issue.
Más de tier4/awkernel
-
Dificultad 1/5 Menos de una hora Aptitud para principiantes 88/100
Los mantenedores suelen responder en 2 días
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 75/100
Los mantenedores suelen responder en 2 días
-
Dificultad 4/5 3-5 días Aptitud para principiantes 48/100
Los mantenedores suelen responder en 2 días
-
Dificultad 4/5 3-5 días Aptitud para principiantes 48/100
Los mantenedores suelen responder en 2 días
-
Deadlock in ixgbeAbierto
Dificultad 4/5 3-5 días Aptitud para principiantes 25/100
Los mantenedores suelen responder en 2 días
Todos los issues de tier4/awkernel
Issues similares
-
marketing
Dificultad 2/5 1-3 horas Aptitud para principiantes 82/100
Los mantenedores suelen responder en 1 día
-
Dificultad 1/5 Menos de una hora Aptitud para principiantes 88/100
flashbots/panetiere#46 · 1 comentario ·
Los mantenedores suelen responder en 5 días
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 78/100
jlcodes99/cockpit-tools#3190 ·
Los mantenedores suelen responder en 4 días
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 72/100
Feyisara2108/stellargive#1376 ·
Los mantenedores suelen responder en 1 día
-
area:post bug effort:medium P7 source:agent
Dificultad 2/5 1-3 horas Aptitud para principiantes 78/100
Los mantenedores suelen responder en 1 día