windows-gnu: every access to a thread_local with Drop contends on a process-wide atomic since 1.98 (~100x slower across threads)

Abierto
#166,131 0 comentarios 0 reacciones 0 asignados Ver en GitHub

Los mantenedores suelen responder en 1 día

Nadie ha tomado este issue todavía.

Evaluación

Dificultad
4/5
Tiempo estimado
3-5 días
Aptitud para principiantes
43/100
Tipo de issue
Error
Claridad
Bien especificado
Estado de actividad
Activo
Stack tecnológico
rust

Línea de trabajo

Start with library/std/src/sys/thread_local/key/windows.rs and guard/windows.rs, especially LazyKey::force, guard::enable, and EnableGuard. Check how the Windows GNU and MSVC configurations track whether a thread's guard is armed, then reproduce the reported contention with the supplied benchmark on x86_64-pc-windows-gnu. Done means accesses to destructible thread-locals no longer contend on the process-wide atomic while thread destructor behavior remains correct.

Escrito por el modelo de indexación a partir del texto del issue.

Descripción

A-thread-locals I-prioritize I-slow needs-triage O-windows-gnu regression-from-stable-to-stable T-libs

Since 1.98.0, on x86_64-pc-windows-gnu, every access to a thread_local! whose type needs Drop costs about 10x more on one thread, and when many threads touch such thread-locals at once it becomes ~100x slower: all of them contend on one process-wide atomic. 1.97.0 is not affected.

Code
use std::cell::RefCell;
use std::time::Instant;

thread_local! {
    // Any thread-local whose type needs Drop.
    static LOCAL: RefCell<Vec<u8>> = const { RefCell::new(Vec::new()) };
}

fn touch(n: usize) {
    for _ in 0..n {
        LOCAL.with(|v| std::hint::black_box(v.borrow().len()));
    }
}

fn main() {
    const N: usize = 2_000_000;
    let t = Instant::now();
    touch(N);
    println!("1 thread:   {:7.1} ns per access", t.elapsed().as_nanos() as f64 / N as f64);
    let threads = std::thread::available_parallelism().map_or(8, |n| n.get());
    let t = Instant::now();
    std::thread::scope(|s| {
        for _ in 0..threads {
            s.spawn(|| touch(N));
        }
    });
    println!("{threads} threads: {:7.1} ns per access (wall time / accesses per thread)", t.elapsed().as_nanos() as f64 / N as f64);
}

rustc -C opt-level=3 repro.rs, target x86_64-pc-windows-gnu, i7-12700H (20 logical CPUs), Windows 11. Two runs each:

rustc 1 thread, ns per access 20 threads at once, ns per access
1.95.0 2.4 / 2.6 15.6 / 18.1
1.97.0 2.3 / 2.3 25.0 / 24.0
1.98.0 23.1 / 22.0 1353.7 / 1305.1
1.100.0 23.9 / 23.1 1522.2 / 1515.6
Likely cause

#148799 (milestone 1.98.0) moved TLS destructors to FLS. windows-gnu has no #[thread_local] (target_thread_local is off), so thread-locals with destructors go through LazyKey, and LazyKey::force calls guard::enable() on every access (library/std/src/sys/thread_local/key/windows.rs):

pub fn force(&'static self) -> Key {
    if self.dtor.is_some() {
        // Needs to be called on all threads where the key might have a non-null value!
        // Otherwise, `run_dtors` might not be called on this thread.
        guard::enable();
    }
    ...

In guard::enable (guard/windows.rs) the "already registered on this thread" check exists only under cfg!(target_thread_local). On windows-gnu registered is always false, so every access runs EnableGuard::new() (a fetch_add on the process-wide ACTIVE_ENABLE_CALLS and a SeqCst fence), KEY.load, IsThreadAFiber(), FlsSetValue(), and the fetch_sub in EnableGuard's Drop. The comment there expects setting the FLS value to be about as cheap as TlsGetValue, but the two RMWs on one shared counter put every thread on the same cache line.

Impact

Code that touches such thread-locals on hot paths from many threads slows down a lot. rayon is one: crossbeam-deque pins crossbeam-epoch (a thread-local handle with Drop) on every steal. With rayon 1.12 / rayon-core 1.13 on a 20-thread pool, one par_iter().sum() over 256 f32s takes 29–43 µs with 1.95.0 and 266–340 µs with 1.100.0. In a real application, per-frame CPU work made of ~20 such small parallel reductions went from ~4 ms to ~7.5 ms, while single-threaded code did not change.

x86_64-pc-windows-msvc should not be affected, since there the REGISTERED thread-local makes enable() return early (not measured).

A possible fix: on windows-gnu, find out without touching shared state that this thread's guard is already armed, e.g. check FlsGetValue(key) before EnableGuard::new(), or call guard::enable() only when a key's value is first set on a thread rather than on every force().

@rustbot label +O-windows-gnu +I-slow +T-libs +A-thread-locals +regression-from-stable-to-stable

Lenguaje dominante
Rust
Estrellas
122k
Forks
16.7k
Merge medio
2 d 16 h
PR fusionados (30 d)
515

Preparar el entorno

Primeros pasos

  1. Lee el issue completo y luego la guía de contribución del proyecto.
  2. Comenta en el issue que vas a ocuparte — evita que dos personas hagan lo mismo.
  3. Haz un fork del repositorio y trabaja en una rama.
  4. Abre un pull request que haga referencia al número del issue.

Más de rust-lang/rust

Todos los issues de rust-lang/rust

Issues similares

Más issues de Rust

Recibe los nuevos issues en tu correo

Un resumen breve de issues de GitHub para principiantes.