`bundle add <gem> --version ...` modifies `Gemfile` before failing when resolution fails
Los mantenedores suelen responder en 1 día
Nadie ha tomado este issue todavía.
Evaluación
- Dificultad
- 2/5
- Tiempo estimado
- 1-3 horas
- Aptitud para principiantes
- 78/100
Línea de trabajo
Lee lib/bundler/injector.rb, especialmente Bundler::Injector#inject, build_gem_lines(false) y las llamadas a append_to y @definition.lock descritas en el issue. Sigue la ruta de bundle add con versión y compárala con la ruta que resuelve la dependencia antes de modificar el Gemfile. Reproduce el problema con la fuente local de gems proporcionada; el trabajo está terminado cuando una resolución fallida deja el Gemfile sin cambios, con o sin --version.
Escrito por el modelo de indexación a partir del texto del issue.
Descripción
Describe the problem as clearly as you can
When bundle add <gem> fails because the requested gem cannot be found (exit code 7), Gemfile is left unchanged. However, when --version is passed (bundle add <gem> --version "~> 1.0"), Bundler appends the broken gem line to Gemfile before raising Bundler::GemNotFound, leaving Gemfile in an unresolvable state for subsequent bundle commands.
In Bundler::Injector#inject (lib/bundler/injector.rb), @definition.remotely! only configures remote sources lazily, and build_gem_lines(false) (used when --version is given) does not access @definition.specs, so append_to writes to Gemfile before @definition.lock runs resolution.
Did you try upgrading rubygems & bundler?
Yes. Reproduced on RubyGems / Bundler 4.1.0 (Ruby 4.0.9) and on ruby/rubygems master (5879ffe34b, 4.2.0.dev).
Post steps to reproduce the problem
mkdir repro-bundle-add && cd repro-bundle-add
mkdir -p repo/gems repo/quick/Marshal.4.8 app
ruby -rzlib -e '
File.binwrite("repo/specs.4.8.gz", Zlib.gzip(Marshal.dump([])))
File.binwrite("repo/prerelease_specs.4.8.gz", Zlib.gzip(Marshal.dump([])))
'
cat > app/Gemfile <<GEMFILE
source "file://$PWD/repo"
GEMFILE
cd app
BUNDLE_PATH=vendor/bundle bundle add nonexistent || echo "exit=$?"
cat Gemfile
BUNDLE_PATH=vendor/bundle bundle add nonexistent --version "~> 1.0" || echo "exit=$?"
cat Gemfile
Which command did you run?
bundle add nonexistent --version "~> 1.0"
What were you expecting to happen?
When bundle add fails resolution with exit code 7, Gemfile should remain unchanged regardless of whether --version was passed, matching bundle add nonexistent without --version and the comment in Bundler::Injector#inject ("resolve to see if the new deps broke anything" before "since nothing broke, we can add those gems to the gemfile").
What happened instead?
$ BUNDLE_PATH=vendor/bundle bundle add nonexistent || echo "exit=$?"
Fetching source index from file:///tmp/repro-bundle-add/repo/
Could not find gem 'nonexistent' in rubygems repository
file:///tmp/repro-bundle-add/repo/ or installed locally.
exit=7
$ cat Gemfile
source "file:///tmp/repro-bundle-add/repo"
$ BUNDLE_PATH=vendor/bundle bundle add nonexistent --version "~> 1.0" || echo "exit=$?"
Fetching source index from file:///tmp/repro-bundle-add/repo/
Could not find gem 'nonexistent (~> 1.0)' in rubygems repository
file:///tmp/repro-bundle-add/repo/ or installed locally.
exit=7
$ cat Gemfile
source "file:///tmp/repro-bundle-add/repo"
gem "nonexistent", "~> 1.0"
If not included with the output of your command, run bundle env and paste the output below
## Environment
```
Bundler 4.1.0
Platforms ruby, x86_64-linux
Ruby 4.0.9p0 (2026-10-23 revision 3e93b23afcec3433f6aecc34b5d832799d754238) [x86_64-linux]
Full Path /opt/ruby-4.0.9/bin/ruby
Config Dir /opt/ruby-4.0.9/etc
RubyGems 4.1.0
Gem Home /opt/ruby-4.0.9/lib/ruby/gems/4.0.0
Gem Path /home/user/.local/share/gem/ruby/4.0.0:/opt/ruby-4.0.9/lib/ruby/gems/4.0.0
User Home /home/user
User Path /home/user/.local/share/gem/ruby/4.0.0
Bin Dir /opt/ruby-4.0.9/bin
Git 2.39.5
```
## Bundler Build Metadata
```
Timestamp 2026-11-16
Git SHA 9af9267
```
## Bundler settings
```
path
Set via BUNDLE_PATH: "/tmp/repro-bundle-add/app/vendor/bundle"
```
## Gemfile
### Gemfile
```ruby
source "file:///tmp/repro-bundle-add/repo"
gem "nonexistent", "~> 1.0"
```
### Gemfile.lock
```
<No /tmp/repro-bundle-add/app/Gemfile.lock found>
```
Credit: https://ucsbplse.github.io/
- Lenguaje dominante
- Ruby
- Estrellas
- 4k
- Forks
- 2k
- Merge medio
- 1 d 20 h
- PR fusionados (30 d)
- 75
Preparar el entorno
Inicia el contenedor de desarrollo del proyecto en tu navegador, con tu propia cuenta de GitHub.
- Sin Dockerfile ni archivo de Docker Compose
- Tiene una plantilla de pull request
- Leer la guía de contribución
Primeros pasos
- Lee el issue completo y luego la guía de contribución del proyecto.
- Comenta en el issue que vas a ocuparte — evita que dos personas hagan lo mismo.
- Haz un fork del repositorio y trabaja en una rama.
- Abre un pull request que haga referencia al número del issue.
Más de ruby/rubygems
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 72/100
Los mantenedores suelen responder en 1 día
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 78/100
Los mantenedores suelen responder en 1 día
-
Dificultad 3/5 1-2 días Aptitud para principiantes 65/100
Los mantenedores suelen responder en 1 día
-
Dificultad 4/5 3-5 días Aptitud para principiantes 56/100
Los mantenedores suelen responder en 1 día
-
Dificultad 4/5 1-2 días Aptitud para principiantes 55/100
Los mantenedores suelen responder en 1 día
Todos los issues de ruby/rubygems
Issues similares
-
needs verification
Dificultad 2/5 1-3 horas Aptitud para principiantes 64/100
Los mantenedores suelen responder en 13 días
-
🐛 bug 👩💻 équipe CE 🧑🏭 entreprises
Dificultad 2/5 1-3 horas Aptitud para principiantes 76/100
betagouv/conseillers-entreprises#4808 ·
Los mantenedores suelen responder en 1 día
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 76/100
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 78/100
Los mantenedores suelen responder en 1 día
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 76/100
yosiat/panko_serializer#250 ·