validator: take the default target gas limit from GAS_LIMIT_SCHEDULE
Los mantenedores suelen responder en 6 días
Nadie ha tomado este issue todavía.
Evaluación
- Dificultad
- 4/5
- Tiempo estimado
- 3-5 días
- Aptitud para principiantes
- 35/100
Línea de trabajo
Start in the validator client where DEFAULT_GAS_LIMIT (60000000) is applied when --gas-limit is absent, and in the beacon node config parsing that drops GAS_LIMIT_SCHEDULE and the /eth/v1/config/spec handler. Check the Config struct stored under Metadata["config"] before adding a field, since that touches DB_VERSION. Done when the validator uses the scheduled limit for the proposal epoch on Sepolia and Platåberget and falls back to 60000000 otherwise, with docs/cli.md and the README updated.
Escrito por el modelo de indexación a partir del texto del issue.
Descripción
The validator client's default target gas limit is a fixed 60000000 (DEFAULT_GAS_LIMIT, overridden by --gas-limit or per validator through the keymanager API). From gloas it is signed into every proposer preference, and produceBlockV4 builds this client's own payload toward the preference's target_gas_limit. A validator left on the default therefore pulls the gas limit toward 60M on every gloas proposal, whatever the network targets.
Two built-in networks schedule something else in their config.yaml's GAS_LIMIT_SCHEDULE:
- Sepolia:
200000000from epoch353024(bin/ethlambda/assets/sepolia/config.yaml). - Platåberget:
200000000from epoch1566(bin/ethlambda/assets/plataberget/config.yaml).
Lighthouse takes its default from the network config's GAS_LIMIT_SCHEDULE before falling back to a built-in value. This client cannot: the beacon node parses the key into nothing (it is one of the keys the ignored-keys warning names), and /eth/v1/config/spec does not serve it.
What it takes
- Beacon node: parse
GAS_LIMIT_SCHEDULEintoConfigand serve it from/eth/v1/config/spec.Configis stored SSZ-encoded underMetadata["config"], so a new field there is aDB_VERSIONbump unless it is kept out of the stored struct. - Validator client: when
--gas-limitis not given, default to the scheduled limit in force at the proposal's epoch, read from/config/spec, and fall back to60000000for a node that does not serve the key.
Until this lands, docs/cli.md and the README tell operators on Sepolia and Platåberget to pass --gas-limit 200000000.
Raised in the review of #707.
- Lenguaje dominante
- Rust
- Estrellas
- 86
- Forks
- 34
- Merge medio
- 9 d 20 h
- PR fusionados (30 d)
- 77
Preparar el entorno
- Incluye un Dockerfile o un archivo de Docker Compose
- Tiene una plantilla de pull request
- Leer la guía de contribución
Primeros pasos
- Lee el issue completo y luego la guía de contribución del proyecto.
- Comenta en el issue que vas a ocuparte — evita que dos personas hagan lo mismo.
- Haz un fork del repositorio y trabaja en una rama.
- Abre un pull request que haga referencia al número del issue.
Más de lambdaclass/ethlambda
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 76/100
lambdaclass/ethlambda#850 ·
Los mantenedores suelen responder en 6 días
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 68/100
lambdaclass/ethlambda#777 · 1 reacción ·
Los mantenedores suelen responder en 6 días
-
Run all gossip validation testsQuizá libre de nuevo @dicethedev la tomó hace 9 días y no hay ningún pull request abierto. Abierto
Dificultad 2/5 1-3 horas Aptitud para principiantes 62/100
lambdaclass/ethlambda#725 · 2 comentarios ·
Los mantenedores suelen responder en 6 días
-
Handle malformed DB dataQuizá libre de nuevo @dicethedev la tomó hace 115 días y no hay ningún pull request abierto. Abierto
Dificultad 2/5 1-3 horas Aptitud para principiantes 76/100
lambdaclass/ethlambda#529 · 4 comentarios ·
Los mantenedores suelen responder en 6 días
-
Document architectural choicesQuizá libre de nuevo @dicethedev la tomó hace 115 días y no hay ningún pull request abierto. Abierto
Dificultad 2/5 1-3 horas Aptitud para principiantes 68/100
lambdaclass/ethlambda#521 · 2 comentarios ·
Los mantenedores suelen responder en 6 días
Todos los issues de lambdaclass/ethlambda
Issues similares
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 84/100
antithesishq/bombadil#473 ·
Los mantenedores suelen responder en 2 días
-
bench/api.sh exec test fails with curl exit 52, and --ignore-failure still records the timingsAbiertobug
Dificultad 2/5 1-3 horas Aptitud para principiantes 72/100
libracoder/kiri#669 ·
Los mantenedores suelen responder en 1 día
-
Dificultad 1/5 Menos de una hora Aptitud para principiantes 88/100
Los mantenedores suelen responder en 5 días
-
autofixer: follow-up
Dificultad 2/5 1-3 horas Aptitud para principiantes 75/100
tursodatabase/turso#12217 ·
Los mantenedores suelen responder en 1 día
-
Declare the CMS schema library in the optional recipients extraPosiblemente ocupada Un pull request vinculado a esta issue está abierto o ya se fusionó. Abiertoarea:python in-progress
Dificultad 2/5 1-3 horas Aptitud para principiantes 82/100
yhay81/pyropdf#1005 · 2 comentarios ·
Los mantenedores suelen responder en 1 día