Report a lane enqueue or SynchronizationContext.Post from a non-simulation thread as a deterministic failure
Los mantenedores suelen responder en 1 día
Nadie ha tomado este issue todavía.
Evaluación
- Dificultad
- 4/5
- Tiempo estimado
- 3-5 días
- Aptitud para principiantes
- 43/100
- Tipo de issue
- Error
- Claridad
- Bastante claro
- Estado de actividad
- Activo
- Stack tecnológico
- csharp
- Área
- distributed-systems, testing
Línea de trabajo
Start by reading SimulationSchedulerLane.Enqueue, SimulationSynchronizationContext.Post and Send, and SimulationScheduler.RegisterCore; the issue identifies these as candidate points for detecting off-thread operation registration. Trace how RunStep surfaces failures and how the driver reports stalls or completion. Done means an off-thread post fails deterministically with its escaping stack, including when it arrives late.
Escrito por el modelo de indexación a partir del texto del issue.
Descripción
Summary
Work posted into a simulation from a thread outside it is accepted silently today. SimulationSchedulerLane.Enqueue (and so SimulationSynchronizationContext.Post) succeeds on a real thread-pool thread. Its SingleThreadedGuard detects only concurrent entry, so the post becomes an operation that no seed decides.
The run then goes wrong in one of two ways:
- It diverges silently. The recorded schedule replays only up to the point where the operation appeared.
- It stalls spuriously. If the post lands after the driver's
RunStepreturnedfalse,TryAdvanceVirtualTimedeclines, because something is now runnable. The driver then sees nothing runnable and no timer pending, whileDescribeLiveness()reportsrunnable 1orExternallyCompletable.
The existing affinity check doesn't catch this. The escaped thread carries no simulation runtime context, so no controlled API reports a SimulationThreadAffinityException.
This was found in ReubenBond/clog#360 and fixed there on the consumer side in ReubenBond/clog#361.
Minimal reproduction
The escape needs unrewritten code (for example a simulation test assembly, which the build doesn't rewrite) that awaits a BCL task combinator over a task that runs its continuations asynchronously:
// In the (unrewritten) test assembly, inside a scenario started on a lane:
var answered = new TaskCompletionSource(TaskCreationOptions.RunContinuationsAsynchronously);
var never = new TaskCompletionSource();
var any = Task.WhenAny(answered.Task, never.Task); // the BCL's combinator, not ControlledTask.WhenAny
bool? inside = null;
_ = any.ContinueWith(_ => inside = scheduler.IsSimulationThread,
CancellationToken.None, TaskContinuationOptions.ExecuteSynchronously, TaskScheduler.Default);
answered.SetResult();
await any; // the continuation is posted to the lane's SynchronizationContext from a .NET TP Worker
never.SetResult();
// inside == false, every run.
Here is why the BCL escapes. Task.RunContinuations doesn't run an ITaskCompletionAction whose InvokeMayRunArbitraryCode is true inline when the completing task has RunContinuationsAsynchronously. It queues it to the thread pool instead, and that includes the TwoTaskWhenAnyPromise. The promise then completes any on the pool, and the await continuation is posted to the lane from that thread.
A diagnostic build logged the stack of every operation registered while !IsSimulationThread. Each one was:
SimulationScheduler.RegisterCore
SimulationScheduler.Schedule / ScheduleAfter
SimulationSchedulerLane.Schedule / Enqueue(ScheduledItem)
SimulationSynchronizationContext.Post
System.Threading.Tasks.AwaitTaskContinuation.RunCallback
System.Threading.Tasks.Task.RunContinuations
System.Threading.Tasks.Task`1.TrySetResult
System.Threading.Tasks.Task.TwoTaskWhenAnyPromise`1.Invoke
System.Threading.ThreadPoolWorkQueue.Dispatch (".NET TP Worker")
Proposed hardening
When a lane enqueue, and so SimulationSynchronizationContext.Post/Send, comes from a thread that isn't one of the scheduler's operation threads and doesn't hold its control scope (!IsSimulationThread):
- Record it as a thread-affinity violation, as
ReportThreadAffinityViolationdoes for controlled APIs. - Have the driving thread's next
RunStepsurface it, so the run fails with the escaping stack rather than diverging or stalling.
A second check would make the failure deterministic even when the escaped thread posts late. When the driver reports a stall or finishes, it could check whether any operation was registered off the simulation thread since the last step.
Possibly related: RegisterCore (and ScheduleAfter's timer path) is the common point where any operation is created, so one check there would cover lanes, timers, and direct Schedule calls alike.
Consumer-side fix, for reference
ReubenBond/clog#361 bans the BCL's Task.WhenAll, Task.WhenAny and Task.WhenEach in simulation test projects, and routes them through a rewritten helper that binds to ControlledTask's combinators. The hardening proposed here would turn any similar escape (Task.Yield or an await with no synchronization context, a raw ThreadPool call, and so on) into an immediate, attributable failure.
- Lenguaje dominante
- C#
- Estrellas
- 0
- Forks
- 0
- Merge medio
- 2 h 32 min
- PR fusionados (30 d)
- 23
Preparar el entorno
- Sin Dockerfile ni archivo de Docker Compose
- Sin plantilla de pull request
- Leer la guía de contribución
Primeros pasos
- Lee el issue completo y luego la guía de contribución del proyecto.
- Comenta en el issue que vas a ocuparte — evita que dos personas hagan lo mismo.
- Haz un fork del repositorio y trabaja en una rama.
- Abre un pull request que haga referencia al número del issue.
Más de ReubenBond/Clockwork
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 68/100
ReubenBond/Clockwork#73 · 1 comentario ·
Los mantenedores suelen responder en 1 día
-
Dificultad 1/5 Menos de una hora Aptitud para principiantes 86/100
ReubenBond/Clockwork#70 ·
Los mantenedores suelen responder en 1 día
-
Dificultad 4/5 3-5 días Aptitud para principiantes 54/100
ReubenBond/Clockwork#77 ·
Los mantenedores suelen responder en 1 día
-
Dificultad 4/5 3-5 días Aptitud para principiantes 45/100
ReubenBond/Clockwork#78 ·
Los mantenedores suelen responder en 1 día
-
Dificultad 3/5 1-2 días Aptitud para principiantes 58/100
ReubenBond/Clockwork#69 ·
Los mantenedores suelen responder en 1 día
Todos los issues de ReubenBond/Clockwork
Issues similares
-
[Bug]: Threading.Analyzers 0.7.79 does not load on the .NET 10 SDK (CS9057), CHT rules silently offAbiertobug regression threading
Dificultad 2/5 1-3 horas Aptitud para principiantes 74/100
CryptoHives/Foundation#362 ·
Los mantenedores suelen responder en 1 día
-
[Bug]: 本地歌词翻译显示错误Abiertobug need-triage
Dificultad 2/5 1-3 horas Aptitud para principiantes 65/100
Fervent-Tempo/AF-Media-Bar#321 ·
-
a-corriger documentation
Dificultad 1/5 Menos de una hora Aptitud para principiantes 87/100
christian-raj/S-Aloha#345 ·
-
bug 要トリアージ
Dificultad 2/5 1-3 horas Aptitud para principiantes 64/100
Los mantenedores suelen responder en 1 día
-
worldInstancedOccluderNode reads its appendix count as one byte, but it is a VLQPosiblemente ocupada @spuddeh la tomó hoy. Abierto
Dificultad 1/5 Menos de una hora Aptitud para principiantes 78/100
Los mantenedores suelen responder en 1 día