[Bug] legacy USB host trusts device-controlled bNumInterfaces and can trigger out-of-bounds access in fixed interface array
Los mantenedores suelen responder en 1 día
Evaluación
- Dificultad
- 4/5
- Tiempo estimado
- 3-5 días
- Aptitud para principiantes
- 48/100
- Tipo de issue
- Error
- Claridad
- Bien especificado
- Estado de actividad
- Tranquilo
- Stack tecnológico
- c
Línea de trabajo
Comienza con USB_MAX_INTERFACE y struct uinstance en components/legacy/usb/usbhost/core/usbhost_core.c; después inspecciona los bucles de attach y detach en las ubicaciones indicadas y la ruta del hub en hub.c:452. Verifica cómo fluye bNumInterfaces durante la enumeración y la limpieza. Se considera terminado cuando ambas rutas manejan de forma segura cantidades superiores a la capacidad del array fijo, incluidos los fallos parciales de attach.
Escrito por el modelo de indexación a partir del texto del issue.
Descripción
RT-Thread Version
master, verified on current worktree at commit 25295501c0cc7181d6a541a867fdf7214879ddf8
Hardware Type/Architectures
Any BSP enabling the legacy USB host stack and connecting to external USB devices
Develop Toolchain
GCC
Describe the bug
Summary
A memory-safety issue exists in RT-Thread's legacy USB host stack because it trusts the device-controlled bNumInterfaces field from the USB configuration descriptor, but stores interface state in a fixed-size internal array of only 8 entries.
USB_MAX_INTERFACE is fixed at 8, and struct uinstance contains only:
struct uhintf *intf[USB_MAX_INTERFACE];
However, the USB device's configuration descriptor field bNumInterfaces is attacker-controlled external input, and both attach and detach paths iterate directly up to device->cfg_desc->bNumInterfaces without comparing it against USB_MAX_INTERFACE.
This makes out-of-bounds access reachable from a malicious USB device.
Relevant Code
Internal capacity limit:
components/drivers/include/drivers/usb_host.h:22components/drivers/include/drivers/usb_host.h:66
#define USB_MAX_INTERFACE 0x08
struct uinstance
{
...
struct uhintf *intf[USB_MAX_INTERFACE];
...
};
Untrusted external field:
components/drivers/include/drivers/usb_common.h:294
rt_uint8_t bNumInterfaces;
Attach path:
components/legacy/usb/usbhost/core/usbhost_core.c:190components/legacy/usb/usbhost/core/usbhost_core.c:229
for (i = 0; i < device->cfg_desc->bNumInterfaces; i++)
{
...
device->intf[i] = (struct uhintf *)rt_malloc(sizeof(struct uhintf));
...
}
Detach path:
components/legacy/usb/usbhost/core/usbhost_core.c:276
for (i = 0; i < device->cfg_desc->bNumInterfaces; i++)
{
if (device->intf[i] == RT_NULL) continue;
...
}
Hub path that makes follow-on detach realistic even if attach fails partway:
components/legacy/usb/usbhost/core/hub.c:452
The attach return value is not handled in a way that prevents later detach-driven access from the same untrusted device lifecycle.
Correct Vulnerability Characterization
The issue is real, but the trigger conditions need to be stated precisely.
1. Out-of-bounds read is the easiest effect to reach
Because the detach path also trusts bNumInterfaces, a malicious USB device can cause the host to read past the 8-entry intf[] array during later disconnect / reconnect / cleanup flows.
2. Out-of-bounds write is also reachable
It is not enough to set only bNumInterfaces = 9. To actually reach the write at device->intf[i] = ... for i >= 8, the malicious USB device must also provide interface descriptors with indices beyond 7, and those descriptors must match an enabled host class driver so that the allocation path is taken.
If those conditions are met, device->intf[i] becomes a real out-of-bounds write.
3. Static storage makes corruption more dangerous
struct uinstance objects come from a static array:
components/legacy/usb/usbhost/core/usbhost_core.c:18
static struct uinstance dev[USB_MAX_DEVICE];
So writing beyond intf[7] is likely to corrupt adjacent fields of the same instance or neighboring device instances, not harmless padding.
Why This Is a Security Issue
This bug is reachable from an untrusted USB device during normal host-side enumeration.
A malicious USB peripheral can provide a crafted configuration descriptor with an oversized bNumInterfaces value and additional interface descriptors designed to drive the host into out-of-bounds access.
This is not just a robustness issue. It is a real memory-safety problem in the legacy USB host stack, with at least:
- Out-of-bounds read during detach / cleanup
- Out-of-bounds write during attach if enough matching interfaces are supplied
Depending on target layout and allocator behavior, the practical impact may include:
- Crash
- Denial of service
- Corruption of adjacent host USB state
- Undefined behavior during later device handling
Steps to Reproduce
A practical PoC should use a programmable USB device/emulator (for example a USB gadget setup, Facedancer-like platform, or custom firmware) and present a crafted configuration descriptor.
Minimal Out-of-Bounds Read PoC
- Enable RT-Thread legacy USB host support.
- Connect a malicious USB device.
- Provide a configuration descriptor with:
bNumInterfaces > 8- Enough malformed or unsupported interface layout so the attach path does not fully populate all
device->intf[]entries
- Trigger disconnect / reconnect or any path that causes cleanup / detach.
- Observe that the detach logic iterates up to the untrusted
bNumInterfacesvalue and readsdevice->intf[i]past the 8-entry array.
Stronger Out-of-Bounds Write PoC
- Provide a crafted configuration descriptor with:
bNumInterfaces > 8- Actual interface descriptors for indices
0..8or higher - Interface class/subclass values that match enabled host class drivers
- Let the host enumerate the device normally.
- When
i >= 8, the attach logic writes todevice->intf[i]even though the fixed array ends atintf[7].
Expected Behavior
RT-Thread should treat bNumInterfaces as untrusted input and reject or clamp any device that reports more interfaces than the internal host representation can store.
At minimum:
- Reject
bNumInterfaces > USB_MAX_INTERFACE - Avoid indexing
device->intf[i]unlessi < USB_MAX_INTERFACE - Apply the same validation consistently in both attach and detach paths
Actual Behavior
RT-Thread directly trusts bNumInterfaces from the device configuration descriptor and uses it to drive loops that index a fixed-size 8-entry internal array.
This allows a malicious USB device to cause out-of-bounds access in the legacy USB host stack.
Suggested Fix
The fix should be applied in all paths that use bNumInterfaces to index device->intf[], including both enumeration and detach/cleanup.
At minimum:
- Reject or clamp
device->cfg_desc->bNumInterfacesif it exceedsUSB_MAX_INTERFACE - Do not allocate or access
device->intf[i]unlessi < USB_MAX_INTERFACE - Ensure failure during attach cannot leave a later detach path iterating on the untrusted original interface count
Kindly let me know if you intend to request a CVE ID upon confirmation of the vulnerability.
Other additional context
No response
- Lenguaje dominante
- C
- Estrellas
- 12.3k
- Forks
- 5.5k
- Merge medio
- 4 d 12 h
- PR fusionados (30 d)
- 32
Preparar el entorno
Inicia el contenedor de desarrollo del proyecto en tu navegador, con tu propia cuenta de GitHub.
- Sin Dockerfile ni archivo de Docker Compose
- Tiene una plantilla de pull request
- Leer la guía de contribución
Primeros pasos
- Lee el issue completo y luego la guía de contribución del proyecto.
- Comenta en el issue que vas a ocuparte — evita que dos personas hagan lo mismo.
- Haz un fork del repositorio y trabaja en una rama.
- Abre un pull request que haga referencia al número del issue.
Más de RT-Thread/rt-thread
-
bug Component component: net
Dificultad 1/5 Menos de una hora Aptitud para principiantes 90/100
RT-Thread/rt-thread#11852 · 1 comentario ·
Los mantenedores suelen responder en 1 día
-
[bsp][stm32][bluepill] README「快速上手」缺少重新生成 MDK 工程这一步,按文档操作无法编译通过Posiblemente ocupada @moment-NEW la tomó hace 3 días. Abiertoin progress
Dificultad 2/5 1-3 horas Aptitud para principiantes 75/100
RT-Thread/rt-thread#11818 · 4 comentarios · 1 asignado ·
Los mantenedores suelen responder en 1 día
-
BSP BSP: Loongson bug RT-Smart
Dificultad 2/5 1-3 horas Aptitud para principiantes 72/100
RT-Thread/rt-thread#11717 · 2 comentarios ·
Los mantenedores suelen responder en 1 día
-
Arch: RISC-V BSP BSP: HPMicro bug
Dificultad 2/5 1-3 horas Aptitud para principiantes 72/100
RT-Thread/rt-thread#11687 · 3 comentarios ·
Los mantenedores suelen responder en 1 día
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 68/100
RT-Thread/rt-thread#11472 · 1 comentario ·
Los mantenedores suelen responder en 1 día
Todos los issues de RT-Thread/rt-thread
Issues similares
-
bug
Dificultad 2/5 1-3 horas Aptitud para principiantes 74/100
EchoTools/nevr-runtime#117 · 2 comentarios ·
Los mantenedores suelen responder en 1 día
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 67/100
DarkFlippers/qUnleashed#240 ·
Los mantenedores suelen responder en 1 día
-
enhancement
Dificultad 2/5 1-3 horas Aptitud para principiantes 72/100
Los mantenedores suelen responder en 1 día
-
Dificultad 1/5 Menos de una hora Aptitud para principiantes 84/100
AFLplusplus/AFLplusplus#2899 ·
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 78/100
HarbourMasters/Shipwright#7320 ·
Los mantenedores suelen responder en 1 día