Aligned columns on the serial monitor while keeping CSV on the SD card
Nadie ha tomado este issue todavía.
Evaluación
- Dificultad
- 2/5
- Tiempo estimado
- 1-3 horas
- Aptitud para principiantes
- 76/100
- Tipo de issue
- Nueva funcionalidad
- Claridad
- Bien especificado
- Estado de actividad
- Activo
- Stack tecnológico
- arduino, cpp
- Área
- embedded-iot
Línea de trabajo
Empieza en el código del logger, donde actualmente se envía el mismo String al archivo SD y a Serial; después inspecciona la interfaz Arduino Print y la condición existente para el eco serial. Añade el adaptador en ese punto del eco dejando sin cambios la escritura en el archivo, y verifica que los encabezados y los datos estén alineados en Serial mientras la tarjeta sigue recibiendo el CSV original.
Escrito por el modelo de indexación a partir del texto del issue.
Descripción
Summary
Keep the SD card log as plain comma-separated values, but show the same lines on the serial monitor as aligned columns, so a person watching the logger can read them. Today the logger writes one String to both the file and Serial, which made alignment look hard. It is not: the alignment can be done on the byte stream on its way to Serial, with no change to the sensors, to getString(), or to what reaches the card.
Design
A small Print adapter sits in front of Serial. It passes bytes through, and at each comma pads the current field to a fixed column width. The file still receives the unmodified CSV.
class AlignedPrint : public Print { // pads each comma-separated field to a column
Print& _out; uint8_t _width, _col = 0;
public:
AlignedPrint(Print& out, uint8_t width = 24) : _out(out), _width(width) {}
size_t write(uint8_t c) override {
if (c == ',') { while (_col++ < _width) _out.write(' '); _col = 0; return 1; }
if (c == '\n') { _col = 0; }
else _col++;
return _out.write(c);
}
};
Use, in the logger, wherever a line is echoed today:
AlignedPrint monitor(Serial);
logFile.print(line); // CSV to the card, unchanged
monitor.print(line); // aligned columns on the serial monitor
The header line goes through the same adapter, so column names sit over their values provided the width covers the longest name (Pressure Atmos [mBar] is 21 characters, so a default of 24).
Cost
- About twenty lines; a few hundred bytes of flash; two bytes of RAM.
- The serial line is roughly twice as long as the CSV line: at 38400 baud a ten-field line takes ~60 ms instead of ~30 ms. Only the serial echo is affected; the SD path is untouched. It can sit behind the same condition that gates the serial echo now.
- No coupling to the sensor libraries or to the NW-Device-Specification work; can land independently.
Choices made here
- Fixed-width padding, not tab characters. Terminal tab stops are eight columns and a value such as
1013.25,already fills one, so tabs align unpredictably. - Left-aligned fields (pad after the value). Right-aligned numbers read slightly better but require holding each field back until its comma arrives: a ~24-byte buffer and about ten more lines. Start left-aligned; revisit if wanted.
Not in scope
Changing the CSV written to the card; changing any sensor library's getHeader()/getString() output.
🤖 Generated with Claude Code
- Lenguaje dominante
- C++
- Estrellas
- 1
- Forks
- 0
- Métricas de merge de PR
- Sin PR fusionados en 30 d
Preparar el entorno
- Sin Dockerfile ni archivo de Docker Compose
- Sin plantilla de pull request
- Leer la guía de contribución
Primeros pasos
- Lee el issue completo y luego la guía de contribución del proyecto.
- Comenta en el issue que vas a ocuparte — evita que dos personas hagan lo mismo.
- Haz un fork del repositorio y trabaja en una rama.
- Abre un pull request que haga referencia al número del issue.
Más de NorthernWidget/Okapi_Library
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 78/100
-
Dificultad 1/5 Menos de una hora Aptitud para principiantes 88/100
-
Dificultad 3/5 1-2 días Aptitud para principiantes 56/100
-
Dificultad 4/5 3-5 días Aptitud para principiantes 48/100
-
Dificultad 4/5 3-5 días Aptitud para principiantes 45/100
Todos los issues de NorthernWidget/Okapi_Library
Issues similares
-
chore: update release scheduleAbierto
Dificultad 2/5 1-3 horas Aptitud para principiantes 62/100
Los mantenedores suelen responder en 4 días
-
nth_root does not restore the rounding mode and can return an upper bound below the true rootAbierto
Dificultad 2/5 1-3 horas Aptitud para principiantes 68/100
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 62/100
scanaislop/aislop#482 ·
Los mantenedores suelen responder en 1 día
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 62/100
EchoTools/nevr-runtime#547 ·
Los mantenedores suelen responder en 1 día
-
1 type: problem 2 scope: firmware 3 good first issue
Dificultad 2/5 1-3 horas Aptitud para principiantes 65/100
SpaceTeam/STS1_COBC_SW#511 ·