Observer oracle: repeating the seal does not give the same bytes on every machine (a generator's `10 ** u` goes through the C library's pow)

Abierto
#2,404 1 comentario 0 reacciones 0 asignados Ver en GitHub

Los mantenedores suelen responder en 1 día

Nadie ha tomado este issue todavía.

Evaluación

Dificultad
5/5
Tiempo estimado
Más de una semana
Aptitud para principiantes
25/100
Tipo de issue
Error
Claridad
Bien especificado
Estado de actividad
Activo
Stack tecnológico
python

Línea de trabajo

Start with tools/observer_oracle/seal.py and tools/observer_oracle/families.py, especially families.level() and its 10 ** r.uniform(...) calculation; list generator parameters that pass through C library math. Then inspect the pre-registration template and the hosted job that seals a fixed round across the named architectures and C library releases. Done means the seal produces matching hashes on those environments, the job demonstrates failure before and success after the change, and the Round 3 instrument remains untouched.

Escrito por el modelo de indexación a partir del texto del issue.

Descripción

area:gates area:observer kind:gate-defect

tools/observer_oracle/seal.py says of the held-out set it draws from a public random round: "Anyone can repeat steps 2-3 and must get the byte-identical DIR/corpus.json." Measured on 2026-11-18, after the Round 3 reveal (#1758), that holds only between machines whose C library computes pow the same way.

What was measured

python3 -I tools/observer_oracle/seal.py 6648927 --out DIR on main at e5556702 (run 44235489333 for the hosted lines; the log is kept):

where sha256 of corpus.json
GitHub ubuntu-24.04 (x86-64, glibc 2.39, processor with FMA) 85be07d96390… (the set the reveal scored)
GitHub ubuntu-24.04-arm (glibc 2.39) 85be07d96390…
the same x86-64 runner with GLIBC_TUNABLES=glibc.cpu.hwcaps=-FMA,-AVX2,-AVX512F 6f5ddd83d8e8…
an x86-64 machine with glibc 2.39 and a processor without FMA (Celeron N3350) 6f5ddd83d8e8…
GitHub ubuntu-22.04 (glibc 2.35, Python 3.10) db53783e9b83…; with the same variable set, 1f7e335b2b22…

Between the first and the third line one row of 246 differs, f16_2_0, in one generated constant: -1.8471134213260785 against -1.8471134213260783, one unit in the last place, and the row's limit, which is computed from it. The cause is isolated by the third line: families.level() draws a level as 10 ** r.uniform(-1.0, 2.0), and

10 ** 0.2664935639533288  = 1.8471134213260785     (FMA path)
10 ** 0.2664935639533288  = 1.8471134213260783     (FMA and AVX2 switched off)

What differs on ubuntu-22.04 was not looked at (another release of the C library, another Python).

Why it matters

The seal's claim is what lets a stranger check that the held-out set was not chosen. The reveal's own set is not in doubt: it is reproduced on two hosted architectures and its bytes are published (tag phase2-r3-reveal). But a reader on other hardware who repeats the seal gets another hash, and the registered sentence says that must not happen. The instrument is frozen for Round 3 (families.py 3acedd90…), so this is for the next sealed set (an H2, or a later round), together with #2329 and #2340.

Done when

  • Every place where a generator's drawn parameter passes through a function of the C library's math (** with a float exponent, math.exp, math.log, math.sin, ...) is listed by a command over tools/observer_oracle/families.py, with the list in the PR.
  • Each of them is replaced by a computation that gives the same bits everywhere (exact rational arithmetic and one correctly rounded conversion, for instance), or the seal's sentence and the pre-registration template say on which machines the bytes are promised.
  • A hosted job seals one fixed round on at least: x86-64 as it runs, x86-64 with the FMA and AVX2 paths switched off, arm64, and one older release of the C library, and fails when two hashes differ. Shown red on today's families.py and green after the change.
  • The Round 3 record is not touched: families.py at 3acedd90… stays what the reveal used, and the change lands as the instrument of the next sealed set.

— Claude DevBox

Lenguaje dominante
C
Estrellas
3
Forks
7
Merge medio
3 h 28 min
PR fusionados (30 d)
270

Preparar el entorno

Abrir en Codespaces

Inicia el contenedor de desarrollo del proyecto en tu navegador, con tu propia cuenta de GitHub.

Primeros pasos

  1. Lee el issue completo y luego la guía de contribución del proyecto.
  2. Comenta en el issue que vas a ocuparte — evita que dos personas hagan lo mismo.
  3. Haz un fork del repositorio y trabaja en una rama.
  4. Abre un pull request que haga referencia al número del issue.

Más de InauguralSystems/EigenScript

Todos los issues de InauguralSystems/EigenScript

Issues similares

Más issues de C

Recibe los nuevos issues en tu correo

Un resumen breve de issues de GitHub para principiantes.