Functional simulation models generated from Liberty for gate-level simulation
Nadie ha tomado este issue todavía.
Evaluación
- Dificultad
- 5/5
- Tiempo estimado
- Más de una semana
- Aptitud para principiantes
- 35/100
- Tipo de issue
- Nueva funcionalidad
- Claridad
- Bastante claro
- Estado de actividad
- Activo
- Área
- tooling
Línea de trabajo
Start with the existing gate-level simulation in Flow and investigate Yosys read_liberty without -lib, focusing on function, ff, and latch groups plus power-pin handling. Locate the model-generation and reporting entry points used for Liberty libraries, then validate generated functional Verilog with Icarus or Verilator. Done means supported cells produce usable models, unsupported cells are clearly reported, and the models work with multiple cell libraries.
Escrito por el modelo de indexación a partir del texto del issue.
Descripción
Vendor cell models are often written for commercial simulators (UDPs, specify blocks) and work poorly in Icarus and Verilator. Generating clean functional Verilog models from each cell's Liberty function, ff and latch groups would let gate-level simulation run with any cell library, and would complement the existing gate-level simulation in Flow.
Yosys can already turn Liberty functions into cells (read_liberty without -lib); this is about integrating that well, with power pins handled and clear reporting of cells that cannot be modelled.
Size: about 1 to 2 weeks of human effort (construction, some research).
- Lenguaje dominante
- Dart
- Estrellas
- 0
- Forks
- 0
- Merge medio
- 2 d 10 h
- PR fusionados (30 d)
- 3
Preparar el entorno
- Sin Dockerfile ni archivo de Docker Compose
- Sin plantilla de pull request
- Leer la guía de contribución
Primeros pasos
- Lee el issue completo y luego la guía de contribución del proyecto.
- Comenta en el issue que vas a ocuparte — evita que dos personas hagan lo mismo.
- Haz un fork del repositorio y trabaja en una rama.
- Abre un pull request que haga referencia al número del issue.
Más de Ferrite-Engineering/simcrux
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 78/100
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 72/100
-
Dificultad 1/5 Menos de una hora Aptitud para principiantes 85/100
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 78/100
-
Check flow tools reports LibreLane and the PDK missing under the Nix launcher, though runs workAbierto
Dificultad 3/5 1-2 días Aptitud para principiantes 45/100
Todos los issues de Ferrite-Engineering/simcrux
Issues similares
-
Dificultad 1/5 Menos de una hora Aptitud para principiantes 62/100
ccch1mneyyy/dsh-Go#1682 ·
Los mantenedores suelen responder en 1 día
-
help wanted
Dificultad 1/5 Menos de una hora Aptitud para principiantes 76/100
pesaclarity/ujumbe-parsers#64 ·
Los mantenedores suelen responder en 1 día
-
enhancement
Dificultad 2/5 1-3 horas Aptitud para principiantes 64/100
patarapolw/lingua_srs#278 ·
Los mantenedores suelen responder en 1 día
-
bug
Dificultad 2/5 1-3 horas Aptitud para principiantes 65/100
dreautall/waterfly-iii#890 · 1 comentario ·
Los mantenedores suelen responder en 1 día
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 80/100
Los mantenedores suelen responder en 1 día