docs: a step-by-step first program on EmbSim's micro:bit board

Abierto
  • ¿Algo no está bien?
#195 0 comentarios 0 reacciones 0 asignados Ver en GitHub

Los mantenedores suelen responder en 1 día

Nadie ha tomado este issue todavía.

Evaluación

Dificultad
3/5
Tiempo estimado
1-2 días
Aptitud para principiantes
82/100
Tipo de issue
Documentación
Claridad
Bien especificado
Estado de actividad
Activo
Stack tecnológico
c, markdown
Área
documentation

Línea de trabajo

Read the Cortex-M3 walkthrough in docs/manual/getting-started.md, the board table, and tests/harness/thumb-m0/boot.c and io.c; build the toolchain and run the documented program with embsim --board microbit --stats. Capture the commands and output as printed, including the librt.a link step for __aeabi_uidivmod, and explain the ARMv6-M instruction set difference. Finish when a fresh clone can follow the walkthrough and make embdoc && ./embdoc check passes.

Escrito por el modelo de indexación a partir del texto del issue.

Descripción

documentation good first issue

Context. Getting started walks through a first program on a Cortex-M3, step by step. The roadmap asks for a getting-started page for each EmbSim board. The BBC micro:bit (a Cortex-M0) is a good next one. Its row in the boards table already gives the target (thumbv6m-none-eabi), the harness (tests/harness/thumb-m0) and the link flags (-e reset -Ttext 0x0 -Tdata 0x20000000), but there is no walkthrough.

Where.

  • docs/manual/getting-started.md: the "Cortex-M3, step by step" section is the model, and the board table is around line 491. Add a "micro:bit (Cortex-M0), step by step" section next to it, or a page under docs/manual/ linked from there; ask in the comments if unsure which.
  • tests/harness/thumb-m0/: its boot.c and io.c are the start-up code and the output functions.
  • embsim --board microbit: runs the image.

Steps.

  1. Write the same small program as the Cortex-M3 section, then compile, link and run it with embcc, embld and embsim --board microbit --stats.
  2. One difference you will meet: ARMv6-M has no divide instruction, so the harness's io.c calls __aeabi_uidivmod, and the link fails with undefined symbol '__aeabi_uidivmod' until the compiler runtime is linked. Build it with make rt-embedded (or sh tools/build-rt.sh thumbv6m-none-eabi build/libc/thumbv6m-none-eabi for this target alone), put build/libc/thumbv6m-none-eabi/librt.a last on the embld line, and explain this in the section.
  3. Paste the commands and the output exactly as printed. Do not edit the output.
  4. Say what else differs from the Cortex-M3 version: ARMv6-M's smaller, mostly 16-bit instruction set.
  5. Run make embdoc && ./embdoc check.

Done when a reader with a fresh clone can follow the section from make embcc embld embsim to the program's output on EmbSim's micro:bit, the output shown is the real one, and ./embdoc check passes.

Before you start: the contributor's guide has the rules. A new test counts only after it has failed against the code before your change, and a commit subject reads area: summary. Questions are welcome in the comments or in Discussions.

Lenguaje dominante
C
Estrellas
1
Forks
2
Merge medio
20 h 55 min
PR fusionados (30 d)
73

Preparar el entorno

Primeros pasos

  1. Lee el issue completo y luego la guía de contribución del proyecto.
  2. Comenta en el issue que vas a ocuparte — evita que dos personas hagan lo mismo.
  3. Haz un fork del repositorio y trabaja en una rama.
  4. Abre un pull request que haga referencia al número del issue.

Más de EmbLinkOs/EmbCC

Todos los issues de EmbLinkOs/EmbCC

Issues similares

Más issues de C

Recibe los nuevos issues en tu correo

Un resumen breve de issues de GitHub para principiantes.