wifi: dual-band SSID reports the wrong band for the connected AP
Nadie ha tomado este issue todavía.
Evaluación
- Dificultad
- 2/5
- Tiempo estimado
- 1-3 horas
- Aptitud para principiantes
- 70/100
- Tipo de issue
- Error
- Claridad
- Bien especificado
- Estado de actividad
- Activo
- Stack tecnológico
- go
- Área
- backend, networking
Línea de trabajo
Empieza en core/internal/server/network/backend_networkmanager_wifi.go, concretamente en updateWiFiNetworks(), y rastrea cómo se agrupan los AP de un mismo SSID y dónde se asignan Connected y Rate. Compara esa ruta con GetWiFiNetworkInfo(), que ya distingue los AP por BSSID. Hecho significa que cada campo de la fila conectada proviene del AP asociado y que la tarjeta ya no mezcla valores de 2.4 GHz y 5 GHz.
Escrito por el modelo de indexación a partir del texto del issue.
Descripción
Compositor: niri 26.04 · Distribution: CachyOS · Install: distro package (dux-shell 2.1.2-1.1) · Network backend: NetworkManager (iwd not in use)
Description
Connected to the 5 GHz AP of a dual-band SSID, the Wi-Fi details card shows a self-contradictory set of values:
Frequency: 2.4 GHz
Channel: 36
Rate: 1361 Mbps
BSSID: <2.4 GHz AP>
Channel 36 is a 5 GHz channel, while the frequency and BSSID belong to the 2.4 GHz radio of the same network — the card mixes data from two different APs.
The rest of the stack is correct:
$ iw dev wlan0 link → freq: 5180.0, tx bitrate 1297.1 MBit/s
$ nmcli ... dev wifi → 2.4 GHz AP on 2437 MHz (100%), connected 5 GHz AP on 5180 MHz (58%)
So NetworkManager and the driver agree on the association; the mismatch is produced in the DMS network backend.
Cause
core/internal/server/network/backend_networkmanager_wifi.go, updateWiFiNetworks() collapses all APs of one SSID into a single entry, and on a stronger AP refreshes only part of the fields:
if strength > existing.Signal {
existing.Signal = strength
existing.Frequency = freq // from the stronger 2.4 GHz AP
existing.BSSID = bssid
} // Channel, Rate, Mode keep the first AP's values
Consequences:
- "2.4 GHz" next to "Channel 36" — partial merge.
- For a dual-band SSID the card describes the strongest radio instead of the associated one (2.4 GHz wins on RSSI here).
Connectedis computed by SSID alone (isConnected := ssid == currentSSID), unlikeGetWiFiNetworkInfo(), which compares BSSIDs — so the aggregated row also takesRatefrom the device bitrate of the real link.
Expected Behavior
The connected network's details should describe the AP the interface is associated with, and all fields of one row should come from the same AP.
Steps to Reproduce
- Have one SSID broadcast on both 2.4 GHz and 5 GHz (typical router setup).
- Connect to the 5 GHz BSSID, with the 2.4 GHz AP being the stronger one.
- Settings → Network → Wi-Fi → expand the connected network.
Error Messages/Logs
No errors in logs — the wrong values are produced by the merge logic.
Scope
Present on v2.1.2; backend_networkmanager_wifi.go is unchanged on master.
dms doctor -vC
██████╗ ███╗ ███╗███████╗
██╔══██╗████╗ ████║██╔════╝
██║ ██║██╔████╔██║███████╗
██║ ██║██║╚██╔╝██║╚════██║
██████╔╝██║ ╚═╝ ██║███████║
╚═════╝ ╚═╝ ╚═╝╚══════╝
System Health Check
──────────────────────────────────────
System
● Operating System ····· CachyOS
└─ ID: cachyos, Version: rolling, Arch: amd64
● Architecture ········· amd64
● Display Server ······· Wayland
└─ WAYLAND_DISPLAY=wayland-1
Versions
● DMS CLI ·············· dms v2.1.2
└─ /usr/bin/dms
● Quickshell ··········· Quickshell 0.3.2 (revision , distributed by Arch Linux)
└─ /usr/bin/qs
● DMS Shell ············ v2.1.2
└─ /run/user/1000/dms-shell/13e2e34644f9af14
Installation
● DMS Configuration ···· Found
└─ /run/user/1000/dms-shell/13e2e34644f9af14
● shell.qml ············ Present
└─ /run/user/1000/dms-shell/13e2e34644f9af14/shell.qml
○ Install Type ········· Unknown
└─ /run/user/1000/dms-shell/13e2e34644f9af14
Compositor
● niri ················· 26.04
└─ /usr/bin/niri
● Background Blur ······ Supported
└─ Compositor supports ext-background-effect-v1
Quickshell Features
● Polkit ··············· Available
└─ Authentication prompts
● IdleMonitor ·········· Available
└─ Idle detection
● IdleInhibitor ········ Available
└─ Prevent idle/sleep
● ShortcutInhibitor ···· Available
└─ Allow shortcut management (niri)
● BackgroundBlur ······· Available
└─ Background blur API support in Quickshell
Optional Features
● accountsservice ······ Available
└─ User accounts
● power-profiles-daemon Available
└─ Power profile management
● logind ··············· Available
└─ Session management
● cups-pk-helper ······· Not available (install cups-pk-helper)
└─ Printer management
→ https://duxlabs.dev/docs/dms/cli-doctor#optional-features
○ I2C/DDC ·············· No monitors detected
└─ External monitor brightness control
● qt6-imageformats ····· Installed (4 formats)
└─ Formats: WebP, TIFF, GIF, ICNS (/usr/lib/qt6/plugins/imageformats:/usr/lib/qt/plugins/imageformats:/usr/lib64/qt6/plugins/imageformats)
● kimageformats ········ Not installed
└─ AVIF, HEIF, JXL support
→ https://duxlabs.dev/docs/dms/cli-doctor#optional-features
● Terminal ············· alacritty
● Network ·············· NetworkManager
└─ NetworkManager present. Using NM API.
● matugen ·············· Installed
└─ Dynamic theming
● cava ················· Missing
└─ Audio visualizer
→ https://duxlabs.dev/docs/dms/cli-doctor#optional-features
○ khal ················· Not installed
└─ Calendar events
○ dux-search ··········· Not installed
└─ File search
○ dux-calendar ········· Not installed
└─ Calendar app
● dux-files ············ Installed
└─ File manager
○ fprintd ·············· Not installed
└─ Fingerprint auth
● adw-gtk3 ············· Installed
└─ GTK3 dynamic theming (user copy)
Config Files
● settings.json ········ Present
└─ /home/user/.config/dms/settings.json
● clsettings.json ······ Present
└─ /home/user/.config/dms/clsettings.json
● plugin_settings.json · Present
└─ /home/user/.config/dms/plugin_settings.json
● session.json ········· Present
└─ /home/user/.local/state/dms/session.json
● dms-colors.json ······ Present
└─ /home/user/.cache/dms/dms-colors.json
Services
● dms.service ·········· enabled, active
└─ Wanted by niri.service
○ greetd ··············· Not installed
└─ Optional greeter service
● xdg-desktop-portal ··· Settings portal reachable
Environment
○ QT_QPA_PLATFORMTHEME · Not set
○ QT_QPA_PLATFORMTHEME… Not set
○ QS_ICON_THEME ········ Not set
○ XDG_MENU_PREFIX ······ Not set
Fonts
● Normal Font ·········· Google Sans Flex
└─ /run/user/1000/dms-shell/13e2e34644f9af14/DCommon/assets/fonts/google-sans-flex/GoogleSansFlex.ttf
● Monospace Font ······· Fira Code
└─ /run/user/1000/dms-shell/13e2e34644f9af14/DCommon/assets/fonts/nerd-fonts/FiraCodeNerdFont-Regular.ttf
● Display Font ········· DM Serif Display
└─ /run/user/1000/dms-shell/13e2e34644f9af14/DCommon/assets/fonts/dm-serif-display/DMSerifDisplay-Regular.ttf
──────────────────────────────────────
3 warning(s), 34 ok
- Lenguaje dominante
- QML
- Estrellas
- 8.4k
- Forks
- 549
- Métricas de merge de PR
- Sin PR fusionados en 30 d
Preparar el entorno
- Sin Dockerfile ni archivo de Docker Compose
- Tiene una plantilla de pull request
- Leer la guía de contribución
Primeros pasos
- Lee el issue completo y luego la guía de contribución del proyecto.
- Comenta en el issue que vas a ocuparte — evita que dos personas hagan lo mismo.
- Haz un fork del repositorio y trabaja en una rama.
- Abre un pull request que haga referencia al número del issue.
Más de AvengeMedia/DankMaterialShell
-
bug
Dificultad 2/5 1-3 horas Aptitud para principiantes 70/100
AvengeMedia/DankMaterialShell#4291 ·
-
flatpak vscode themingAbierto
Dificultad 2/5 1-3 horas Aptitud para principiantes 70/100
AvengeMedia/DankMaterialShell#4287 ·
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 63/100
AvengeMedia/DankMaterialShell#4159 ·
-
Cursor selection leaves existing GTK cursor settings unchangedQuizá libre de nuevo @Mario-Mohar la tomó hace 10 días y no hay ningún pull request abierto. Abiertobug
Dificultad 2/5 1-3 horas Aptitud para principiantes 72/100
AvengeMedia/DankMaterialShell#4117 · 2 comentarios ·
-
bug niri
Dificultad 2/5 1-3 horas Aptitud para principiantes 66/100
AvengeMedia/DankMaterialShell#3959 ·
Todos los issues de AvengeMedia/DankMaterialShell
Issues similares
-
Bug Ruby
Dificultad 2/5 1-3 horas Aptitud para principiantes 76/100
getsentry/sentry-ruby#3211 · 1 comentario ·
Los mantenedores suelen responder en 2 días
-
area: pages backend bug difficulty: easy dx frontend good first issue help wanted javascript performance priority: P3 quality routing seo tech: cloudflare-workers tech: html user-experience
Dificultad 2/5 1-3 horas Aptitud para principiantes 76/100
flisk-sh/readme-score#57 ·
Los mantenedores suelen responder en 1 día
-
[BUG] Bundle products lose their price in RSS feeds: getPrices() was removedPosiblemente ocupada @pcvelz la tomó hoy. Abierto
Dificultad 1/5 Menos de una hora Aptitud para principiantes 90/100
OpenMage/magento-lts#5869 ·
Los mantenedores suelen responder en 2 días
-
bug
Dificultad 2/5 1-3 horas Aptitud para principiantes 78/100
aws/mcp-proxy-for-aws#476 ·
Los mantenedores suelen responder en 1 día
-
bug
Dificultad 2/5 1-3 horas Aptitud para principiantes 85/100
swc-project/swc-next-issues#396 ·