qwen_code:带 "/" 的模型 ID 被当作 provider/model 拆分,引擎收到的是截断后的 ID

Open
#383 1 comment 0 reactions 0 assignees View on GitHub

Maintainers usually reply within 1 day

@Walternater is already working on this.

Since Nov 13, 2026.

  • #399 by @Walternater — open

Assessment

Difficulty
3/5
Estimated time
1-2 days
Newbie friendliness
72/100
Issue type
Bug
Clarity
Clearly specified
Activity status
Active
Tech stack
go

Research direction

Read internal/credential/provider_query.go and trace how ResolveModelRef() handles --provider and --model; then inspect internal/agent/qwen_code.go, especially buildQwenCodeRunCmd(). Reproduce with the qwen_code engine and zcode/GLM-5.3-Flash; done means the full model ID reaches qwen and provider lookup succeeds without requiring a workaround.

Written by the indexing model from the issue text.

Description

bug

问题
skill-up 把 --model 值里的任何 / 都当作 provider 命名空间分隔符来解析。但有些模型的真实 ID 本身就含斜杠——例如 qwen 的 modelProviders 里注册的就是 id: zcode/GLM-5.3-Flash。这个 ID 被强制拆开后,引擎 CLI 只收到斜杠后面的裸名(GLM-5.3-Flash),而 qwen 的 findModelConfig 按 id 全等匹配,裸名匹配不到任何 provider,于是认证失败。

在 v0.14.0 实测确认;当前 main 上相关代码没有变化。

复现步骤(v0.14.0,内置 qwen_code 引擎,qwen CLI 0.26.7)

bash
skill-up run eval.yaml --engine qwen_code --model zcode/GLM-5.3-Flash
所有 case 启动即报 qwen 的认证错误:

缺少 OpenAI 兼容认证的 API Key。请设置 settings.security.auth.apiKey 或设置 'OPENAI_API_KEY' 环境变量。

qwen 实际收到的是 -m 'GLM-5.3-Flash'(裸名)→ provider 查找失配 → 认证回退到 OPENAI_API_KEY → 失败,尽管 qwen 自己的 settings.json 里有可用凭据。
qwen 直连对照:echo hi | qwen --yolo -m 'GLM-5.3-Flash' 以同样方式失败;-m 'zcode/GLM-5.3-Flash' 正常。
同一命令不带 --model 则正常:qwen settings.json 的 model.name(完整带斜杠 ID)原样透传。
证据
失败运行的 result.json 显示了拆分结果:

json
"requested_configuration": {
"engine": "qwen_code", "protocol": "openai",
"provider": "zcode", "model": "GLM-5.3-Flash"
}
根因
internal/credential/provider_query.go — ResolveModelRef() 只要前缀是已配置的 provider,就按第一个 / 拆分:zcode/GLM-5.3-Flash → provider=zcode + model=GLM-5.3-Flash。
internal/agent/qwen_code.go — buildQwenCodeRunCmd() 只把 Cfg.ModelName(裸名)拼进 -m,provider 前缀从不回拼。qodercli 在 #247/#262 已获得显式 ID 透传修复;qwen_code 被漏掉了。
修复建议
对 qwen_code 原样透传模型 ID(或拼 -m 参数时回拼 provider + "/" + model)。qwen 从自己的 settings 解析 provider,拆分后的裸名在 qwen 侧不是合法的模型引用——除非恰好存在同名的裸名 provider 条目。

临时绕过(无需改 skill-up,2026-11-06 补充实测,按推荐顺序):

--provider openai --model <完整带斜杠 ID>(推荐):设置 --provider 后 --model 走 opaque 直传,不再经过 provider/model 拆分逻辑。实测 transcript 中 executionContext.modelId 为完整 ID 直达引擎、认证通过。模型选择显式体现在命令行上,可复现。
不带 --model 运行:把完整 ID 写进 qwen settings.json 的 model.name,由 qwen 侧解析(ResolveModelRef 不介入)。
注册裸名别名:在 qwen settings.json 的 modelProviders 里额外注册一条裸名条目(如 id: GLM-5.3-Flash 指向同一 baseUrl/apiKey),让截断后的裸名也能命中——适合无法改 skill-up 命令行的场景。
附:--engine-kwarg 传模型(model= / qwen_model= / model_name=)不是绕过路径——qwen_code 引擎的 kwarg 白名单不含任何模型 key,三种 key 名均被校验层忽略并告警 "does not support kwarg"(2026-11-06 实测)。

Dominant language
Go
Stars
1.5k
Forks
134
Avg merge
1d 22h
Merged PRs (30d)
61

Getting set up

First steps

  1. Read the whole issue, then the project's contributing guide.
  2. Comment on the issue to say you are picking it up — it saves two people doing the same work.
  3. Fork the repository and make your change on a branch.
  4. Open a pull request that references the issue number.

More from alibaba/skill-up

All issues in alibaba/skill-up

Similar issues

More Go issues

Get new issues in your inbox

A short digest of beginner-friendly GitHub issues.