Clarify serial REPL access from WSL2 when the CIRCUITPY drive is visible
Maintainers usually reply within 1 day
Nobody has claimed this yet.
Assessment
- Difficulty
- 2/5
- Estimated time
- 1-3 hours
- Newbie friendliness
- 67/100
- Issue type
- Documentation
- Clarity
- Mostly clear
- Activity status
- Active
- Tech stack
- python
- Domain
- documentation
Research direction
Start by finding the CircuitPython guide that explains serial REPL access and its existing troubleshooting steps. Add a WSL2 note explaining how to check USB device access and identify the serial port, and clarify that a visible CIRCUITPY drive does not guarantee serial REPL access. Done when users can distinguish filesystem access from serial access and know what to check next.
Written by the indexing model from the issue text.
Description
I am using an Adafruit Feather Bluefruit Sense with CircuitPython 10.0.3 on Windows with WSL2 Ubuntu. The CIRCUITPY drive was visible, but my development environment's serial monitor only listed /dev/ttyS0 to /dev/ttyS7, and I could not identify the board's serial connection.
Could the documentation include a troubleshooting note for users running CircuitPython tools from WSL2?
I think it would be helpful to clarify that seeing the CIRCUITPY drive does not necessarily mean the serial REPL is accessible from the Linux environment. The guide could explain how to check USB device access and identify the correct serial port.
This would help beginners distinguish between filesystem access and serial-console access, and determine whether the problem is related to the host environment, USB access, or the development tool.
- Dominant language
- C
- Stars
- 4.6k
- Forks
- 1.4k
- Avg merge
- 1d 1h
- Merged PRs (30d)
- 208
Getting set up
This project ships no dev container, Dockerfile or contributing guide, so setting up is up to you: start from its README, and see our first-contribution guide for the general steps.
First steps
- Read the whole issue, then the project's contributing guide.
- Comment on the issue to say you are picking it up — it saves two people doing the same work.
- Fork the repository and make your change on a branch.
- Open a pull request that references the issue number.
More from adafruit/circuitpython
-
SPIDevice selects an active-high device as soon as it is createdPossibly taken @mikeysklar claimed this today. Open
Difficulty 2/5 1-3 hours Newbie friendliness 73/100
adafruit/circuitpython#11869 ·
Maintainers usually reply within 1 day
-
documentation rp2
Difficulty 1/5 1-3 hours Newbie friendliness 67/100
adafruit/circuitpython#11779 · 1 comment ·
Maintainers usually reply within 1 day
-
enhancement network
Difficulty 4/5 3-5 days Newbie friendliness 48/100
adafruit/circuitpython#11845 ·
Maintainers usually reply within 1 day
-
bug
Difficulty 5/5 Over a week Newbie friendliness 25/100
adafruit/circuitpython#11834 ·
Maintainers usually reply within 1 day
-
audio bug crash esp32-s3 needs retest
Difficulty 4/5 3-5 days Newbie friendliness 45/100
adafruit/circuitpython#11822 · 2 comments ·
Maintainers usually reply within 1 day
All issues in adafruit/circuitpython
Similar issues
-
Difficulty 1/5 Under an hour Newbie friendliness 78/100
gnif/LookingGlass#1352 ·
-
Difficulty 2/5 1-3 hours Newbie friendliness 75/100
Maintainers usually reply within 1 day
-
Difficulty 2/5 1-3 hours Newbie friendliness 85/100
-
Difficulty 2/5 1-3 hours Newbie friendliness 62/100
bazel-contrib/rules_go#4784 · 1 comment ·
Maintainers usually reply within 1 day
-
Bug: settings::init() silently continues when neutralino.config.json is missingPossibly taken @mishradwaterlaw claimed this today. Open
Difficulty 2/5 1-3 hours Newbie friendliness 86/100
neutralinojs/neutralinojs#1882 ·
Maintainers usually reply within 1 day