IDS: Exam solution 10/09/2026
Nobody has claimed this yet.
Assessment
- Difficulty
- 1/5
- Estimated time
- Under an hour
- Newbie friendliness
- 18/100
- Issue type
- Documentation
- Clarity
- Needs clarification
- Activity status
- Active
- Domain
- content
Research direction
Read the attached IDS_2026_SeptemberOUT.pdf and compare Exercise II with the textbook exercises referenced in the issue. The body includes a submitted MATLAB script but does not specify a change to make or what completion would look like.
Written by the indexing model from the issue text.
Description
Exercise II was identical to two exercises in the textbook. Therefore, anyone who did not complete it had evidently not even looked through the book.
As usual there was one student who submitted the following exam completely done by AI and completely wrong
INCREDIBLE
load citiesItaly.mat
% Numeric vars
PUL = varfun(@isnumeric, citiesItaly, 'OutputFormat','uniform');
numT = citiesItaly(:, PUL);
meds = varfun(@median, numT);
mads = varfun(@(x) mad(x,1), numT);
medVals = table2array(meds);
madVals = table2array(mads);
sigma = madVals / 0.6745;
names = numT.Properties.VariableNames;
Z = table();
for k = 1:numel(names)
col = numT.(names{k});
Z.( [names{k} '_robustz'] ) = (col - medVals(k)) ./ sigma(k);
end
citiesItalyRobust = [citiesItaly Z];
summaryStats = table(names', medVals', sigma', 'VariableNames', {'Variable','Median','UnbiasedMAD'});
robCols = endsWith(citiesItalyRobust.Properties.VariableNames,"_robustz");
Trob = citiesItalyRobust(:, robCols);
X = table2array(Trob);
names = Trob.Properties.VariableNames;
p = size(X,2);
figure;
hold on;
for k = 1:p
h = boxchart(k*ones(size(X,1),1), X(:,k));
h.BoxFaceColor = [0.6 0.6 0.9];
h.MarkerStyle = 'none';
h.DisplayName = names{k};
end
hold off;
xlim([0.5 p+0.5]);
set(gca, 'XTick', 1:p, 'XTickLabel', names, 'XTickLabelRotation', 45);
ylabel("addedval(1)");
title("addedval(1)");
legend("show", "Location", "bestoutside");
s = skewness(X,0);
% Find largest absolute skewness
[~, idxAbsMax] = max(abs(s));
varAbsMax = names{idxAbsMax};
skewAbsMax = s(idxAbsMax);
[skewPosMax, idxPosMax] = max(s);
[skewNegMin, idxNegMin] = min(s);
varPosMax = names{idxPosMax};
varNegMax = names{idxNegMin};
disp(table(names', s', 'VariableNames', {'Variable','Skewness'}));
fprintf('Largest absolute skewness: %s (skewness = %.4g)\n', varAbsMax, skewAbsMax);
fprintf('Largest positive skewness: %s (skewness = %.4g)\n', varPosMax, skewPosMax);
fprintf('Largest negative skewness: %s (skewness = %.4g)\n', varNegMax, skewNegMin);
load citiesItaly.mat
want = {'addedval','depos'};
vars = citiesItaly.Properties.VariableNames;
if all(ismember(want,vars))
sel = want;
else
PUL = varfun(@isnumeric, citiesItaly, 'OutputFormat','uniform');
numVars = citiesItaly.Properties.VariableNames(PUL);
if numel(numVars) < 2
error('Need at least two numeric variables in the table.');
end
sel = numVars(1:2);
end
x = table2array(citiesItaly(:,sel(1)));
y = table2array(citiesItaly(:,sel(2)));
XY = [x(:) y(:)];
if size(XY,2) ~= 2
error('XY must be n-by-2.');
end
if size(XY,1) < 2 || all(var(XY)==0)
error('Need at least two nonidentical observations.');
end
% Scatter
figure; hold on; axis equal;
scatter(XY(:,1), XY(:,2), 30, [0 0.4470 0.7410], 'filled');
mu = mean(XY,1);
S = cov(XY);
if ~isequal(size(S),[2 2])
error('Covariance matrix is not 2-by-2. Check input data.');
end
k = chi2inv(0.99,2);
[V,D] = eig(S);
% Semi-axis lengths
a = sqrt(k * D(1,1));
b = sqrt(k * D(2,2));
% Ellipse in eigen-coordinates and transform back
t = linspace(0,2*pi,300);
ellipse_eig = [a*cos(t); b*sin(t)];
ellipse = (V * ellipse_eig)' + mu;
% Plot ellipse and principal axes
plot(ellipse(:,1), ellipse(:,2), 'r-', 'LineWidth',1.5);
for i = 1:2
vec = V(:,i) * sqrt(k * D(i,i));
plot([mu(1)-vec(1), mu(1)+vec(1)], [mu(2)-vec(2), mu(2)+vec(2)], 'k--', 'LineWidth',1.2);
end
xlabel(sel{1}); ylabel(sel{2});
title(sprintf('Scatter of %s vs %s with 99%% Confidence Ellipse', sel{1}, sel{2}));
legend('Data','99% ellipse','Principal axes','Location','best');
grid on; hold off;
load citiesItaly.mat
% Select first two numeric variables
PUL = varfun(@isnumeric, citiesItaly, 'OutputFormat','uniform');
numVars = citiesItaly.Properties.VariableNames(PUL);
if numel(numVars) < 2
error('Need at least two numeric variables in the table.');
end
x = table2array(citiesItaly(:,numVars{1}));
y = table2array(citiesItaly(:,numVars{2}));
figure('Name','Scatter with Bivariate (marginal) Boxplots','NumberTitle','off');
% Main scatter axes
mainPos = [0.15 0.15 0.65 0.65];
axMain = axes('Position',mainPos);
scatter(axMain, x, y, 30, [0 0.4470 0.7410], 'filled');
axis(axMain,'equal');
xlabel(axMain, numVars{1}); ylabel(axMain, numVars{2});
grid(axMain,'on');
% Top boxplot for X
topPos = [mainPos(1) mainPos(2)+mainPos(4)+0.02 mainPos(3) 0.12];
axTop = axes('Position',topPos);
boxplot(axTop, x, 'Orientation','horizontal','Labels',{''}, 'Colors','k');
set(axTop,'XAxisLocation','top','XTick',[],'YTick',[]);
xlim(axTop, xlim(axMain));
% Right boxplot for Y
rightPos = [mainPos(1)+mainPos(3)+0.02 mainPos(2) 0.12 mainPos(4)];
axRight = axes('Position',rightPos);
boxplot(axRight, y, 'Orientation','vertical','Labels',{''}, 'Colors','k');
set(axRight,'YTick',[],'XTick',[]);
ylim(axRight, ylim(axMain));
% Link limits so they stay consistent when zooming/panning
linkaxes([axMain axTop], 'x');
linkaxes([axMain axRight], 'y');
box(axTop,'off'); box(axRight,'off');
load citiesItaly.mat
% Pick first two numeric vars
PUL = varfun(@isnumeric, citiesItaly, 'OutputFormat','uniform');
numVars = citiesItaly.Properties.VariableNames(PUL);
if numel(numVars) < 2
error('Need at least two numeric variables.');
end
X = table2array(citiesItaly(:, numVars(1:2)));
[robCov,robMean] = robustcov(X,'Method','fmcd');
md2 = sum(((X - robMean) / robCov) .* (X - robMean), 2);
cut = chi2inv(0.99,2);
outIdx = find(md2 > cut);
if ~isempty(citiesItaly.Properties.RowNames)
outNames = citiesItaly.Properties.RowNames(outIdx);
disp('Rows outside robust bivariate boxplot (row names):');
disp(outNames);
else
disp('Rows outside robust bivariate boxplot (row indices):');
disp(outIdx);
end
- Dominant language
- MATLAB
- Stars
- 30
- Forks
- 1
- PR merge metrics
- No merged PRs in 30d
Getting set up
This project ships no dev container, Dockerfile or contributing guide, so setting up is up to you: start from its README, and see our first-contribution guide for the general steps.
First steps
- Read the whole issue, then the project's contributing guide.
- Comment on the issue to say you are picking it up — it saves two people doing the same work.
- Fork the repository and make your change on a branch.
- Open a pull request that references the issue number.
More from UniprJRC/DSwithMATLAB
-
Difficulty 1/5 Under an hour Newbie friendliness 75/100
UniprJRC/DSwithMATLAB#243 ·
-
Difficulty 1/5 Under an hour Newbie friendliness 75/100
UniprJRC/DSwithMATLAB#242 ·
-
Difficulty 1/5 Under an hour Newbie friendliness 78/100
UniprJRC/DSwithMATLAB#241 ·
-
Difficulty 1/5 Under an hour Newbie friendliness 83/100
UniprJRC/DSwithMATLAB#240 ·
-
Suggestion for the next edition
Difficulty 2/5 1-3 hours Newbie friendliness 82/100
UniprJRC/DSwithMATLAB#238 · 2 comments ·
All issues in UniprJRC/DSwithMATLAB
Similar issues
-
bug priority: p3 size: xs
Difficulty 1/5 Under an hour Newbie friendliness 75/100
-
Ax/Atb trim the caller's GpuIds in place, so blocksize-1 solvers run on one GPU after the first anglePossibly taken @AnderBiguri claimed this 1 day ago. Open
Difficulty 2/5 1-3 hours Newbie friendliness 82/100
Maintainers usually reply within 1 day
-
Difficulty 2/5 1-3 hours Newbie friendliness 77/100
-
Difficulty 2/5 1-3 hours Newbie friendliness 78/100
-
Difficulty 2/5 1-3 hours Newbie friendliness 63/100
mathworks/MATLAB-Coding-Guidelines#7 · 3 comments ·