1.0 Compatibility
Maintainers usually reply within 1 day
Nobody has claimed this yet.
Assessment
- Difficulty
- 5/5
- Estimated time
- Over a week
- Newbie friendliness
- 25/100
- Issue type
- Feature
- Clarity
- Needs clarification
- Activity status
- Active
- Domain
- release
Research direction
Start by reviewing the FreeCAD 1.0 release links and the unchecked addon issues in this checklist. Determine which remaining addons still need compatibility verification, including the optional Qt6 and Coin3D v4.0.3 testing. Done means the relevant addon entries have been tested and the checklist accurately reflects their status.
Written by the indexing model from the issue text.
Description
Per the FreeCAD blog
- 1.0 Released
- RC4
phase is occurring - RC3 skipped
- RC2
phase is occurring - RC1
phase is occurring
and we're encouraging addon developers to make sure their addons are compatible.
- Bonus: If possible please consider testing your addons/workbenches with Qt6 and Coin3D v4.0.3 builds since 1.0 release cycle will be oriented to stabilizing those libraries within FC.
- https://github.com/cadenasgmbh/3dfindit-freecad-integration/issues/21
- https://github.com/kbwbe/A2plus/issues/644
- https://github.com/FredsFactory/FreeCAD_AirPlaneDesign/issues/51
- https://github.com/QuentinTournier40/AnimationFreeCAD/issues/16
-
https://github.com/podestplatz/BCF-Plugin-FreeCAD/issues/9 - https://github.com/yorikvanhavre/CADExchanger/issues/9
- https://github.com/jaheyns/CfdOF/issues/185
- https://github.com/galou/freecad.cross/issues/49
- https://github.com/tomate44/CurvesWB/issues/136
- https://github.com/chbergmann/CurvedShapesWorkbench/issues/31
- https://github.com/easyw/Defeaturing_WB/issues/12
- https://github.com/MariwanJ/Design456/issues/91
- https://github.com/oddtopus/dodo/issues/26
- https://github.com/DualSPHysics/DesignSPHysics/issues/218
- https://github.com/mwganson/DynamicData/issues/80
-
https://github.com/ediloren/EM-Workbench-for-FreeCAD/issues/13 - https://github.com/erroronline1/estimateWB/issues/13
- https://github.com/JMG1/ExplodedAssembly/issues/41
- https://github.com/dubstar-04/FeedsAndSpeeds/issues/56
- https://github.com/Serince/FEMbyGEN/issues/60
- https://github.com/FrontISTR/FEM_FrontISTR/issues/13
- https://github.com/FreeCAD/freecad.ship/issues/61
- https://github.com/FlachyJoe/FCPDWorkbench/issues/33
-
https://github.com/juanvanyo/FreeCAD-GDT/issues/18 - https://github.com/KeithSloan/GDML/issues/142
- https://github.com/jmplonka/InventorLoader/issues/87
- https://github.com/execuc/LCInterlocking/issues/68
- https://github.com/furti/FreeCAD-Lithophane/issues/41
- https://github.com/mnesarco/MarzWorkbench/issues/41
-
https://github.com/j-wiedemann/mooc-workbench/issues/11 - https://github.com/j8sr0230/Nodes/issues/136
- https://github.com/chbergmann/OpticsWorkbench/issues/51
-
https://github.com/TheRaytracers/freecad-povray-render/issues/7 - https://github.com/amrit3701/FreeCAD-Reinforcement/issues/221
- https://github.com/APEbbers/FreeCAD-Ribbon/issues/53
- https://github.com/rostskadat/FreeCAD-SH3D/issues/3
- https://github.com/edwardvmills/Silk/issues/36
- https://github.com/kwahoo2/freecad-xr-workbench/issues/2
- https://github.com/Mambix/FreeCAD-yaml-workbench/issues/21
- Dominant language
- No language data
- Stars
- 18
- Forks
- 15
- Avg merge
- 1d 2h
- Merged PRs (30d)
- 13
Getting set up
This project ships no dev container, Dockerfile or contributing guide, so setting up is up to you: start from its README, and see our first-contribution guide for the general steps.
First steps
- Read the whole issue, then the project's contributing guide.
- Comment on the issue to say you are picking it up — it saves two people doing the same work.
- Fork the repository and make your change on a branch.
- Open a pull request that references the issue number.
More from FreeCAD/Addons
-
FreeCAD NxtOpen+ 💿 𝗔𝗱𝗱𝗼𝗻
Difficulty 2/5 1-3 hours Newbie friendliness 68/100
FreeCAD/Addons#162 · 3 comments ·
Maintainers usually reply within 1 day
-
GenCAD Addon addingOpen+ 💿 𝗔𝗱𝗱𝗼𝗻
Difficulty 4/5 3-5 days Newbie friendliness 35/100
FreeCAD/Addons#158 · 1 comment ·
Maintainers usually reply within 1 day
-
PushNotificationOpen+ 💿 𝗔𝗱𝗱𝗼𝗻
Difficulty 3/5 1-2 days Newbie friendliness 35/100
FreeCAD/Addons#133 · 2 comments ·
Maintainers usually reply within 1 day
-
+ 💿 𝗔𝗱𝗱𝗼𝗻
Difficulty 2/5 1-3 hours Newbie friendliness 45/100
FreeCAD/Addons#132 · 2 comments ·
Maintainers usually reply within 1 day
-
+ 💿 𝗔𝗱𝗱𝗼𝗻
Difficulty 4/5 3-5 days Newbie friendliness 35/100
FreeCAD/Addons#129 · 1 comment ·
Maintainers usually reply within 1 day
Similar issues
-
documentation
Difficulty 2/5 1-3 hours Newbie friendliness 72/100
AR-js-org/arjs-plugin-artoolkit#70 ·
Maintainers usually reply within 1 day
-
package-update
Difficulty 2/5 1-3 hours Newbie friendliness 70/100
oSoWoSo/vOid_Community_repOsitory#330 ·
Maintainers usually reply within 1 day
-
Difficulty 2/5 1-3 hours Newbie friendliness 72/100
Maintainers usually reply within 1 day
-
Help-Wanted Needs-Triage Package-Request
Difficulty 2/5 1-3 hours Newbie friendliness 60/100
microsoft/winget-pkgs#450297 ·
Maintainers usually reply within 1 day
-
Difficulty 2/5 1-3 hours Newbie friendliness 62/100
HakanSeven12/OpenCADStudio#1706 · 1 comment ·
Maintainers usually reply within 1 day