SpacehuhnTech/esp8266_deauther

0.91 inch isn't working

Open

#1,734 创建于 2024年9月5日

在 GitHub 查看
 (3 评论) (0 反应) (0 负责人)C (14,772 star) (2,758 fork)batch import
help wanted

描述

Have you searched for existing (open and closed) issues describing the same problem?

No

Describe the error 0.91 inch display won't just start working

Error/Compile/Output Log
Nothing

To Reproduce Steps to reproduce the behavior:

  1. Go to '...'
  2. Click on '....'
  3. Scroll down to '....'
  4. See error

Expected behavior Expected to see display output and showing attacks "death probe and beacon"

Screenshots If applicable, add screenshots to help explain your problem.

Environment (please complete the following information):

  • Hardware [e.g. DSTIKE, DIY]
  • esp8266

Attempts Changing pin numbers

Additional context I've seen videos of people directly plugging 0.91 inch display after unplugging 0.96 inch ssd1306 display the 0.91 inch as mentioned on data sheet has the same I ssd1306 but still the display won't work

贡献者指南

技术栈
ccpp
领域
security
议题类型
bug
难度面向新贡献者的预计实现难度，1 表示很小改动，5 表示专家级工作。
3
预计时间有经验贡献者完成调查、实现、测试并准备 pull request 的粗略时间范围。
1-3 hours
活动状态议题当前的可参与程度：新鲜、活跃、陈旧、阻塞或等待维护者输入。
needs maintainer response
清晰度议题是否清楚说明期望改动、验收标准和下一步。
needs investigation
前置要求
ESP8266SSD1306 OLED display
新手友好度1-100 的估计分数，表示该议题对首次贡献者的友好程度。
30
研究方向
Investigate the display initialization code in the firmware, likely in files related to OLED display drivers (e.g., SSD1306.cpp or similar). Check if the I2C address and pin configuration for the 0.91 inch display match the hardware setup. Compare with existing working configurations for 0.96 inch displays. Consider adding debug output to verify I2C communication and display initialization steps.