qmk/qmk_firmware

[Feature Request] Standard functions for analog keyboards

已關閉

#25,875 建立於 2025年12月13日

在 GitHub 查看貢獻者指南
 (9 則留言) (0 個反應) (0 位負責人)C (43,867 個分叉)batch import
enhancementhelp wantedstale

倉庫指標

星標
 (20,368 顆星)
PR 合併指標
 (平均合併 20天 9小時) (30 天內合併 27 個 PR)

描述

Feature Request Type

  • Core functionality
  • Add-on hardware support (eg. audio, RGB, OLED screen, etc.)
  • Alteration (enhancement/optimization) of existing feature(s)
  • New behavior

Description

Are there any standard functions for analog keyboards (Hall Effect/TMR/inductive etc)? Like setting actuation point, rapid trigger, SOCD, OKMC, setting curve points, calibration? Or ways of scanning an analog matrix on ADCs? So far I noticed there's either HC164 bit shifters that power columns of sensors in turn, either analog switches that switch sensors output into ADCs.

貢獻者指南

研究方向
This issue requests standard functions for analog keyboards in QMK. To start, review the QMK matrix scanning implementation in `tmk core` and check for any existing analog handling in `quantum/analog.c`. The comments may contain discussions about approaches for ADC scanning and rapid trigger logic. Look into how HC164 shifters are currently used and identify where analog support could be integrated.
技術棧
c
領域
backendinfrastructure
議題類型
功能
難度面向新貢獻者的預計實作難度，1 表示很小改動，5 表示專家級工作。
4
預計時間有經驗貢獻者完成調查、實作、測試並準備 pull request 的粗略時間範圍。
超過 1 週
活動狀態議題目前的可參與程度：新鮮、活躍、陳舊、阻塞或等待維護者輸入。
新近可參與
清晰度議題是否清楚說明預期改動、驗收標準和下一步。
需要先調研
前置要求
C programmingAnalog sensor basicsQMK firmware structure
新手友善度1-100 的估計分數，表示該議題對首次貢獻者的友善程度。
10