One camera overrides the feed of another camera. Same feed twice. One missing.
#1,286 建立於 2019年5月21日
倉庫指標
- 星標
- (3,533 顆星)
- PR 合併指標
- (平均合併 16天 14小時) (30 天內合併 33 個 PR)
描述
motionEye version: 0.40 Motion Version: 4.0 OS Version: Debian 9.9
Not totally sure this isn't some oversight on my end...
I've narrowed down the issue to two specific cameras. I currently have only these two cameras installed in MotionEye and the I'm seeing the behaviour. Both cameras are Trendnet IP Cameras Model TV-IP310PI Both cameras are being accessed with AUTH via a URL like: rtsp://HOSTNAME.lan/Streaming/Channels/1
If I disable one (toggle Video Device switch) then the remaining one correctly shows its video feed. When they are both enabled, then one of their feeds is displayed for both camera views.
To rule out conflicts with other NVR apps I've been evaluating, I just did a completely fresh install of a minimal Debian 9 and have only installed motionEye following the instructions for Debian on the wiki. The problem still occurs.
This happens identically in Chrome, Safari and Firefox.
Find attached a screencap of the duplicate feeds. Also attaching the two camera-x.conf files. Also attaching the motion.conf file.
Really enjoying setting this up so far. Hopefully can get past this hurdle. Please advise.