SpacehuhnTech/esp8266_deauther

0.91 inch isn't working

Open

#1,734 建立於 2024年9月5日

在 GitHub 查看
 (3 留言) (0 反應) (0 負責人)C (14,772 star) (2,758 fork)batch import
help wanted

描述

Have you searched for existing (open and closed) issues describing the same problem?

No

Describe the error 0.91 inch display won't just start working

Error/Compile/Output Log
Nothing

To Reproduce Steps to reproduce the behavior:

  1. Go to '...'
  2. Click on '....'
  3. Scroll down to '....'
  4. See error

Expected behavior Expected to see display output and showing attacks "death probe and beacon"

Screenshots If applicable, add screenshots to help explain your problem.

Environment (please complete the following information):

  • Hardware [e.g. DSTIKE, DIY]
  • esp8266

Attempts Changing pin numbers

Additional context I've seen videos of people directly plugging 0.91 inch display after unplugging 0.96 inch ssd1306 display the 0.91 inch as mentioned on data sheet has the same I ssd1306 but still the display won't work

貢獻者指南

技術棧
ccpp
領域
security
議題類型
bug
難度面向新貢獻者的預計實作難度，1 表示很小改動，5 表示專家級工作。
3
預計時間有經驗貢獻者完成調查、實作、測試並準備 pull request 的粗略時間範圍。
1-3 hours
活動狀態議題目前的可參與程度：新鮮、活躍、陳舊、阻塞或等待維護者輸入。
needs maintainer response
清晰度議題是否清楚說明預期改動、驗收標準和下一步。
needs investigation
前置要求
ESP8266SSD1306 OLED display
新手友善度1-100 的估計分數，表示該議題對首次貢獻者的友善程度。
30
研究方向
Investigate the display initialization code in the firmware, likely in files related to OLED display drivers (e.g., SSD1306.cpp or similar). Check if the I2C address and pin configuration for the 0.91 inch display match the hardware setup. Compare with existing working configurations for 0.96 inch displays. Consider adding debug output to verify I2C communication and display initialization steps.
0.91 inch isn't working · SpacehuhnTech/esp8266_deauther#1734 | Good First Issue