bughelp wanted
Métricas do repositório
- Stars
- (20.368 stars)
- Métricas de merge de PR
- (Mesclagem média 20d 9h) (27 fundiu PRs em 30d)
Description
I followed the instructions to compile and flash durgod/k320; this worked fine on Linux. I then tried to get it working on OSX and have compiled, but cannot flash. This is true both for the command line "qmk flash" and for the QMK Toolbox.
It appears to hang when trying to erase. I wonder if I missed a step to provide adequate permissions?
Output from QMK Toolkit (pulling out USB connection while hanging):
*** STM32 DFU device connected: STMicroelectronics STM32 BOOTLOADER (0483:DF11:2200)
*** Attempting to flash, please don't remove device
>>> dfu-util -a 0 -d 0483:DF11 -s 0x8000000:leave -D /Users/adam.piper/repos/qmk_firmware/durgod_k320_ahri.bin
dfu-util 0.9
Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc.
Copyright 2010-2016 Tormod Volden and Stefan Schmidt
This program is Free Software and has ABSOLUTELY NO WARRANTY
Please report bugs to http://sourceforge.net/p/dfu-util/tickets/
Opening DFU capable USB device...
ID 0483:df11
Run-time device DFU version 011a
Claiming USB DFU Interface...
Setting Alternate Setting #0 ...
Determining device status: state = dfuERROR, status = 10
dfuERROR, clearing status
Determining device status: state = dfuIDLE, status = 0
dfuIDLE, continuing
DFU mode device DFU version 011a
Device returned transfer size 2048
DfuSe interface name: "Internal Flash "
Downloading to address = 0x08000000, size = 21332
Download [ ] 0% 0 bytesdfu-util: Error during special command "ERASE_PAGE" get_status
*** STM32 DFU device disconnected: STMicroelectronics STM32 BOOTLOADER (0483:DF11:2200)
Output from CLI (leaving it hanging):
% qmk flash
Ψ Compiling keymap with make -j 1 durgod/k320:ahri:flash
QMK Firmware 0.13.19
Making durgod/k320 with keymap ahri and target flash
arm-none-eabi-gcc (GNU Tools for Arm Embedded Processors 8-2019-q3-update) 8.3.1 20190703 (release) [gcc-8-branch revision 273027]
Copyright (C) 2018 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Size before:
text data bss dec hex filename
0 21332 0 21332 5354 .build/durgod_k320_ahri.hex
Size after:
text data bss dec hex filename
0 21332 0 21332 5354 .build/durgod_k320_ahri.hex
Copying durgod_k320_ahri.bin to qmk_firmware folder [OK]
Bootloader not found. Trying again every 0.5s (Ctrl+C to cancel)............
dfu-util 0.10
Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc.
Copyright 2010-2020 Tormod Volden and Stefan Schmidt
This program is Free Software and has ABSOLUTELY NO WARRANTY
Please report bugs to http://sourceforge.net/p/dfu-util/tickets/
Opening DFU capable USB device...
ID 0483:df11
Run-time device DFU version 011a
Claiming USB DFU Interface...
Setting Alternate Setting #0 ...
Determining device status: state = dfuERROR, status = 10
dfuERROR, clearing status
Determining device status: state = dfuIDLE, status = 0
dfuIDLE, continuing
DFU mode device DFU version 011a
Device returned transfer size 2048
DfuSe interface name: "Internal Flash "
Downloading element to address = 0x08000000, size = 21332
Erase [ ] 0% 0 bytes
(it just sits at 0 bytes seemingly forever - I left it for 20 mins the first time as I was scared of bricking the keyboard!)
In both cases after unplugging and reconnecting the keyboard everything is fine, so it's not erasing anything.
System Information
- Keyboard: Durgod K320
- Operating system: OSX Big Sur
- AVR GCC version: avr-gcc (Homebrew AVR GCC 8.4.0_2) 8.4.0
- ARM GCC version: arm-none-eabi-gcc (GNU Tools for Arm Embedded Processors 8-2019-q3-update) 8.3.1 20190703 (release) [gcc-8-branch revision 273027]
- QMK Firmware version: 0.13.19