SpacehuhnTech/esp8266_deauther

Buttons not working

Open

#1573 opened on Aug 15, 2022

View on GitHub
 (28 comments) (0 reactions) (0 assignees)C (14,772 stars) (2,758 forks)batch import
help wanted

Description

I tried to install the deauther 2.6.1 on few esp8266 devices. Unfortunately the buttons are not operational at all. There are two Nodemcu 8266 v1 where the display (I2C) and everything else is working properly except the buttons. I have one more ESP8266 noname and the result is the same. the config is default: // ===== BUTTONS ===== // #define BUTTON_UP 14 // D5 #define BUTTON_DOWN 12 // D6 #define BUTTON_A 2 // D4 #define BUTTON_B 0 // D3 but connecting to the GND is without any change.
The terminal command : screen mode buttontest shows only false on all 4 buttons. there is no difference between D5,D6 or D3 connected to the GND or not

Contributor guide

Tech stack
c
Domain
security
Issue type
bug
DifficultyEstimated implementation difficulty for a new contributor, from 1 for very small changes to 5 for expert-level work.
3
Estimated timeA rough time range for an experienced contributor to investigate, implement, test, and prepare a pull request.
1-2 days
Activity statusHow available the issue appears right now: fresh, active, stale, blocked, or waiting on maintainer input.
active
ClarityHow clearly the issue explains the expected change, acceptance criteria, and next step.
clear
Prerequisites
C programmingESP8266 basicsGPIO concepts
Newbie friendlinessA 1-100 score estimating how approachable this issue is for first-time contributors.
40
Research direction
Investigate the button GPIO initialization and interrupt handling in the firmware. Check the pin mapping and pull up resistor configuration. Review the buttontest command implementation to understand why all pins read false. Look at the schematic or default configuration to ensure correct wiring.